Profile and tube benders
-
Universal bending machine OH 010
Used to bend materials of flat, square and circular cross-sections and thick-walled heating pipes. Max. Material dimensions Round timber: 16mm Concrete steel: 14mm Square steel: 16x16mm Steel strip - radius bend: 10x50mm Steel strip - sharp bend: 6x50mm < br> Scope of delivery: 24, 30, 37, 43, 49, 62 and 75 mm O 24 , 30, 37, 43, 49, 62 and 75 mm Provides a truly economic way of bending common shapes and bends. The bending head with the lever is detachable and easy to carry; with a clamping pad (Order No. 1010 250.W) can be clamped to a vice in various workplaces, service wagons, etc. Can bend simple and complex shapes, bends up to 180 °, various closed shapes - all Cold. An angular stop is used to ensure precision in series production. In combination with the shaping tool, the bending machine enables the production of decorative grilles, garden furniture or decorative elements in interiors and exteriors. Extension lever for greater bending power. Rigid stand with base for machine anchoring.
On request480,35 € with VAT -
Transverse rollers for OH 010 bending machine - set 010-180
They are used for bending flat steel strip with a width of up to 50 mm and a thickness of 7 mm and for the bending of square steel up to 16 × 16 mm with a bending cross. This set is designed for artistic locksmith work but is also suitable for common locksmith work. The set consists of eight rollers. Extends the bending capabilities of the following diameters: - pr. 110, 150, 175 and 200 mm.
On request336,10 € with VAT -
OH 040 combi pipe bender
Excellent helper when bending pipes from bricked steel, brass and copper materials. Max. wall thickness - steel: 2mm Max. wall thickness - other materials: 1,5mm Max. bending angle: 180 ° Roller set in diameters 5 - 6, 8, 10, 12 mm - > Clamping can be directly on the worktop by means of a built-in clamp or clamping into the claws of a vice • Contains a set of 4 pieces of interchangeable pulleys around which the bending of the pipes is performed by the lever • The reverse part of the lever serves as the key to release the pulley when it is exchanged for another Allows also the clamping of the material when it is cut to the required length, thus replacing the vice Bending is possible up to 180 ° in all the planes, ie the space It is suitable for installation workers during assembly hydraulic distributors, plumbers, car mechanics, locksmiths, etc.
In stock167,80 € with VAT -
Manual hydraulic pipe bender HRB 10
With six segments for diameters 1/2 "- 2 Universal for heating and plumbing applications, steel and non-ferrous metals Contains segments 1/2", 3/4 ", 1", 1 1 / 4 ", 1 1/2", 2 " Forming capacity: 10,000 kg Bending pressure: 10 t Piston stroke: 155 mm Dimensions (W x H x D) ): 710 × 590 × 220 mm
On request504,39 € with VAT -
Brake pipe bender with diameters of 6.0 mm
Manual roll bender for brake pipes with a diameter of 6 mm. It allows to perform two bending radii on the pipeline: 25 mm and 12.5 mm. Thanks to the removal of material in a small farm, it is possible to make bends R 12.5 just after screwing. Bending range 0 - 180 ° C 28Can-shaped bends can be made). Total length 240mm
In stock27,35 € with VAT -
Brake pipe bender with diameters of 3, 4 and 6 mm
Manual bender for brake / thin-walled tubes with a diameter of 3, 4 and 6mm Suitable for brake / thin-walled tubes made of material lu: copper, brass, aluminum Bending range 45 ° to 90 °. The bender contains a scale with lines for these two angles The advantage of the pliers is their compact size. You will also get to hard-to-reach places
In stock8,65 € with VAT -
Jewelry anvil with 4 interchangeable tips
Sympathetic small anvil with 4 interchangeable cones Application can be found in watch and jewelery workshops Size without cone: 75x75x95mm Impact surface 75x35mm Contains two stepped tips and two smooth tips: 1st stepped tip: length 85mm, individual steps have the following diameters dimensions: 8/10/11 / 12,5 / 14 / 15,5mm 2nd step tip: length 80mm, individual steps with diameters: 10 / 12,5 / 15,5 / 22 / 25mm 1st smooth tip: length 55mm, diameter 8-37,5mm 2nd smooth tip: length 80mm, diameter 10 -25mm Supplied with wooden file
On request65,63 € with VAT -
Bending machine 12mm tubes, 180°
Manual Thin-walled Brass Copper Tube Bender - Tube Bender Tube Diameter: 12 mm Radius: 38mm Shoulder Length: 405mm & 420mm Bending Machine Bends Accurate Bending tubes in the angular range 0 to 180 degrees. This is a pipe bender, not a round blade!
In stock15,86 € with VAT