Metric
-
Straight groove (without breaker)
-
Straight groove with a chip breaker
-
Spiral - screw groove
-
Your taps
-
For cordless drill
-
Machine tap M12 HSSE-PM GAL TiCN ISO2(6H) DIN376 with chip breaker, FANAR
Machine tap( speed cutter 29 M 12 with chip breaker, straight groove Pitch: 1.75, basic Faceted ISO2 / 6H - ground thread profile Standard: DIN 376 Thread start: B, 4 turns - see attached photo Material : HSSE-PM( High speed steel 5% Cobalt, sintering) Grinding thread profile Coating: TiCN - Carbon-Nitride Titanium Use: Use: 4.2: Aluminum with silicon content: 1%
In stock23,74 € with VAT -
Machine tap M3.5 HSSE ISO2 C (6H) DIN376 for brass, FANAR
Machine tap (quick-cutting) M 3.5, straight groove Slope: 0.6, basic Fitting: ISO2 / 6H - ground thread profile Standard: DIN 376 Thread start: C, 2 courses - see attached photo Material: HSSE (High speed steel +5% Cobalt) Grounded thread profile Usage: Brass with a long chip Structural and carbon steel, low-alloy steel, cast steel up to 800N/mm2 Automatic steel, structural and cement steel Spherical and malleable cast iron Unalloyed and low-alloyed copper alloys Aluminum alloys with Si content < 5% Thermoplastics
In stock10,74 € with VAT -
Machine tap M12 left HSSE ISO3(6G) DIN376 with chip breaker, FANAR
Left machine tap( speed cutter) M 12 with breaker for chisels, straight groove Climbs nA: 1,75, basic Fitting: ISO3 / 6G - grinding profile thread Standard: DIN 376 Thread thread: B, 4 courses - see attached photo Material: HSSE( High speed steel 5% Cobalt) Grinding profile thread Application: < br> Construction and carbon steel, low-alloyed steel, cast steel up to 800N / mm2 Brass with long cutting Automatic steel, structural and case-hardening steel Spherical and malleable cast iron Non-alloy and low-alloyed copper alloys Aluminum aluminum containing Si
In stock58,89 € with VAT -
Machine tap M12 HSSE GAL ISO2(6HX) DIN376 spiral (45°), FANAR
Machine spiral tap( quick cut) M 12, R45 SE 800 Size: M12x1,75 Pitch: 1,75, basic Fitting: ISO2 / 6HX - ground thread profile Standard: DIN 376 C Thread start: C, 2 steps - see attached photo Materials !L: HSSE( High speed steel 5% Cobalt) Coating: uncoated Helix angle: 45 ° Application: 4.2: Aluminum with silicon content: 1%
In stock24,07 € with VAT -
Machine tap M10 spiral DIN 371 B ISO2 6H HSSE PM HL - DC SWISS
Clearance saleZ362V-3 Stainless Steel Threaded Tap: 1.5 - Basic Facing: ISO2 / 6H - Cut Thread DIN 371 (Reinforced Stopper) Material : HSSE (High-Speed ??Steel 5% Cobalt) Finish: HL (Balinit Hardlube) - High Abrasion Coating 40 ° Hex Groove Color: blue strip Application: Stainless Steel with strength up to 1100 N / mm2 - Blind hole M10
On request21,76 € with VAT -
Machine tap short M7 HSS ISO2 E(6H) ISO529-D, FANAR
Quick machine tap M 7, straight groove Gradient: 1.0, basic Facing: ISO2 / 6H - Threaded profile Standard: ISO 529 D / DIN 13 Thread start: E, 1,5 feed - see enclosed photo Material: HSS (Cutting steel) Cutting thread profile Application: 1.2: Structural and carbon steel, low alloy steel up to 500N / mm2 1.3: Structural and carbon steel, low alloy steel, steel up to 800N / mm2
On request7,60 € with VAT -
Set of machine taps M3-M12 HSSE OPTI OX with chip breaker, FANAR
Set of HSSE OX chip breaker machine taps The set includes taps: M3 / M4 / M5 / M6 / M8 / M10 - according to DIN371 (reinforced shank) M12 - according to DIN376 ("thin shank - common from M12 upwards) Tolerance: ISO2 / 6H Material: HSSE Coating: OX - Oxidation Number of lead-in teeth: B (4-5 teeth) Usage - through hole: 1.3 : Structural and carbon steel, low-alloy steel, cast steel up to 800N/mm2 2.2 : Austenitic corrosion-resistant steel up to 800N/mm2 Cat. no.: Z2-081015-0000
In stock67,43 € with VAT -
Machine tap set M3-M12 HSSE OPTI OX spiral groove, FANAR
Set of machine taps with spiral groove / set of spiral taps HSSE OX The set includes taps: M3 / M4 / M5 / M6 / M8 / M10 - according to DIN371 (reinforced shank) M12 - according to DIN376 ("thin shank - common from M12 upwards) Tolerance: ISO2 / 6H Material: HSSE Coating: OX - Oxidation Number of lead teeth: C (2-3 teeth) Usage - blind hole : 1.3 : Structural and carbon steel, low-alloy steel, cast steel up to 800N/mm2 2.2 : Austenitic corrosion-resistant steel up to 800N/mm2 Cat. no.: Z2-085015-0000
In stock72,71 € with VAT -
Set of machine taps M3-M12 HSSE 800X with chip breaker, FANAR
Set of machine taps with chip breaker HSSE 800X The set includes taps: M3 / M4 / M5 / M6 / M8 / M10 - according to DIN371 (reinforced shank) M12 - according to DIN376 ("thin shank - common from M12 upwards) Tolerance: ISO2 / 6H Material: HSSE Coating: TiN Number of lead-in teeth: B (4-5 teeth) Usage - through hole: 2.1 : Ferritic and martensitic stainless steel up to 1000N/mm2 2.2 : Austenitic corrosion-resistant steel up to 850N/mm2 1.3 : Structural and carbon steel, low-alloy steel, cast steel up to 1100N/mm2 1.4 : Alloy steels, cold drawn tool steel up to 1000N/mm2 2.3 : Heat-resistant corrosion-resistant steel up to 1100N/mm2 * Food-grade corrosion-resistant steel (does not enlarge the thread, keeps the prescribed tolerance) Cat. no.: Z2-113X15-0310
In stock124,90 € with VAT -
Set of machine taps M3-M12 HSSE 800X spiral groove, FANAR
Set of machine taps with spiral groove / set of spiral taps HSSE 800X Set contains taps: M3 / M4 / M5 / M6 / M8 / M10 - according to DIN371(reinforced shank) M12 - according to DIN376( "thin shank - common from M12 up to) Tolerance: ISO2 / 6H Coating: TiN - Titanium Nitride Number of lead teeth: C(2-3 teeth) Application - blind hole: 2.1: Ferritic and martensitic stainless steel up to 1000N / mm2 2.2: Austenitic stainless steel up to 850N / mm2 1.3: Structural and carbon steel, low-alloy steel, steel castings up to 1100N / mm2 1.4: Alloy steels, cold-drawn tool steel up to 1000N / mm2 2.3: Heat-resistant stainless steel up to 1100N / mm2 - Food grade stainless steel(does not increase thread, holds prescribed tolerance) Cat. No: Z2-513X15-0310
In stock131,25 € with VAT -
Machine tap set M3-M12 HSSE-PM FAN with chip breaker, FANAR
Set of machine taps with chip breaker HSSE-PM FAN The set includes taps: M3 / M4 / M5 / M6 / M8 / M10 - according to DIN371 (reinforced shank) M12 - according to DIN376 ("thin shank" - common from M12 upwards) Tolerance: ISO2 / 6H Material : HSSE-PM (sintered cobalt steel) Coating: TiAlSiN Number of lead-in teeth: B (4-5 teeth) Usage - through hole: 1.4 : Alloy steels, cold drawn tool steel up to 1000N/mm2 1.5 : Hardened and hardened steels up to 38 HRC up to 1200N/mm2 2.1 : Ferritic and martensitic stainless steel up to 1000N/mm2 2.3 : Heat-resistant corrosion-resistant steel up to 1100N/mm2 3.3 : Nodular and malleable cast iron up to 700N/mm2 3.4 : Nodular and malleable cast iron up to 1000N/mm2 1.3 : Structural and carbon steel, low-alloy steel, cast steel up to 1100N/mm2 6.4: Bronze and aluminum up to 1200N/mm2 7.4 : Aluminum alloys with silicon content Si > 10%, up to 400N/mm2 8.2 : Thermoplastics and hardened plastics Cat. no.: Z4-115001-0312
In stock103,37 € with VAT -
Machine tap set M3-M10 HSSE-PM HL MasterTap with chip breaker, FANAR
Set of machine taps with chip breaker HSSE-PM HL Set contains taps: M3 / M4 / M5 / M6 / M8 / M10 - according to DIN371(reinforced shank) Tolerance: ISO2 / 6H Coating: HL - Balinit HardLube with carbide component(TiAlN WC / C) with hardness 2600 HV Number of lead teeth: B(4-5 teeth) Application - through hole: Universal - for steels, stainless steels, cast iron, non-ferrous metals and heat-resistant steels, can also be used for emergency threading of hardened steel. Suitable for machining centers, possibly also for older types of numerical and conventional machines with lower power. Contact the Company: Kat. No .: Z4-118M15-0310
On request108,74 € with VAT