Metric
-
Straight groove (without breaker)
-
Straight groove with a chip breaker
-
Spiral - screw groove
-
Your taps
-
For cordless drill
-
Tap - M - for cordless drill HSSE ISO2 C with spiral flute, VOLKEL
Right machine tap with spiral groove, for metric thread - with hexagon for battery drill Size: according to the selected variant Other dimensions - see the attached catalog sheet Form : C Helix angle: 15° Material: HSSE - High Speed Steel + 5% Cobalt Co5 Standard: DIN371 (M12 DIN376) Usage : Well machinable materials up to 900 N/mm2 Unalloyed and low-alloyed steels For blind holes
from 10,09 € with VAT -
Machine tap M5 HSSE ISO2(6H) DIN371 straight slot, NAREX 1000
Clearance saleMachine tap( quick cut) M 5, straight groove Pitch: 0,8, basic Fitting: ISO2 / 6H - grinding Thread profile Standard: DIN 371 Thread start: C, 2-3 turns - see attached photo Material: HSSE( Speed cutting steel 5% Cobalt) Thread grinding profile Application: 1.2: Non-alloy cast steel 2.2: Construction and stainless steel 8.1: Aluminum alloyed with Si content 10% 10.1: Copper alloys with short brittle chips
On request8,77 € with VAT -
Machine tap M3 HSSE TiN ISO2(6H) DIN371 spiral (35°), NAREX 2060
Machine spiral tap M 3 Size: M3x0,5 Gradient: 0,45, basic Facing: ISO2 / 6H - Cut thread profile DIN 371 C < br> Thread Start: C, 2 Steps - See attached photo Material: HSSE (5% Cobalt Rapid Steel) TiN (Nitride Titanium) Helix Angle: 35 ° Application: 2.2: Structural and heat-treated steels up to 800 N / mm2 2.3: Unalloyed cast steel with strength up to 800 N / mm2 8.1: / b> 6.2: Alloy and tempered cast iron 8.2: Aluminum alloyed with Si content> 10% 10.2: Copper alloy with long corrugated chip
In stock13,95 € with VAT -
Machine tap M3 HSSE ISO2 DIN376, NAREX 3000
Machine tap ( high-speed ) M 3, straight groove Pitch: 0.5, basic Fit: ISO2 / 6H - ground thread profile Standard: DIN 376 Thread lead: C, 2-3 courses - see attached photo Material: HSSE ( High-speed steel 5% Cobalt ) Grounded thread profile Usage: 1.2: Non-alloyed cast steels 2.2 : Structural and refined steels 8.1 : Aluminum alloy with Si content < 10% 1.1 : Mild structural steels with strength up to 500 N/mm2 2.1 : Automatic and structural steels with a strength of up to 800 N/mm2 2.3 : Unalloyed cast steels with a strength of up to 800 N/mm2 6.2 : Ductile and malleable cast iron 8.2 : Alloyed aluminum with a Si content > 10% 10.1 : Copper alloys with a short friable chip
In stock10,77 € with VAT -
Machine tap M8 HSSE ISO2 DIN376, NAREX 3000
Machine tap ( quick-cutting ) M 6, straight groove Pitch: 1.0, basic Fit: ISO2 / 6H - ground thread profile Standard: DIN 376 Thread lead: C, 2-3 courses - see attached photo Material: HSSE ( High-speed steel 5% Cobalt ) Grounded thread profile Usage: 1.2: Non-alloyed cast steels 2.2 : Structural and refined steels 8.1 : Aluminum alloy with Si content < 10% 1.1 : Mild structural steels with strength up to 500 N/mm2 2.1 : Automatic and structural steels with a strength of up to 800 N/mm2 2.3 : Unalloyed cast steels with a strength of up to 800 N/mm2 6.2 : Ductile and malleable cast iron 8.2 : Alloyed aluminum with Si content > 10% 10.1 : Copper alloys with a short friable chip
In stock12,58 € with VAT -
Machine tap M10 HSSE ISO2 DIN376, NAREX 3000
Machine tap ( quick-cutting ) M 10, straight groove Pitch: 1.5, basic Fit: ISO2 / 6H - ground thread profile Standard: DIN 376 Thread lead: C, 2-3 courses - see attached photo Material: HSSE ( High-speed steel 5% Cobalt ) Grounded thread profile Usage: 1.2: Non-alloyed cast steels 2.2 : Structural and refined steels 8.1 : Aluminum alloy with Si content < 10% 1.1 : Mild structural steels with strength up to 500 N/mm2 2.1 : Automatic and structural steels with a strength of up to 800 N/mm2 2.3 : Unalloyed cast steels with a strength of up to 800 N/mm2 6.2 : Ductile and malleable cast iron 8.2 : Alloyed aluminum with a Si content > 10% 10.1 : Copper alloys with a short friable chip
On request14,58 € with VAT -
Set of taps M3-M12 for AKU HSSE ISO2 B drill with breaker, VOLKEL
Set of machine taps with straight groove and chip breaker, for metric thread - with hexagon for AKU drill Size: M3-M12 Pitch: basic Form: B Material: HSSE - High Speed ??Steel 5% Cobalt Co5 Standard: DIN371(M12 DIN376) Use: Well machinable materials up to 900 N/mm2 Unalloyed and low-alloyed steels For through holes
On request86,06 € with VAT -
Set of taps M3-M12 for AKU drill HSSE ISO2 C with spiral groove, VOLKEL
Set of machine spiral taps for metric thread - with hexagon for AKU drill Size: M3-M12 Pitch: basic Form: C Helix angle: 15° Material: HSSE - High Speed ??Steel 5% Cobalt Co5 Standard: DIN371(M12 DIN376) Use: Well machinable materials up to 900 N/mm2 Non-alloyed and low-alloyed steels For blind holes
In stock97,73 € with VAT -
Machine tap M20 HSS-G ISO2 B ISO529 with chip breaker, VOLKEL
Right machine tap, straight slot with chip breaker, for metric thread Size: M20 x 2.5 / 20x2.5 Pitch: 2.5 Form: B Material: HSS - High-speed steel Standard: ISO529 Usage: Well machinable materials up to 800 N/mm2 Non-alloyed and low-alloyed steels For through holes
In stock30,98 € with VAT -
Machine tap M20 HSS-G ISO2 C ISO529 spiral, VOLKEL
Machine tap, spiral - helix, for metric thread Size: M20 / 20x2.5 Pitch: 2.5 Spiral: 35° Form: C Material: HSS - High-speed steel Standard: ISO 529 Usage: Well machinable materials up to 800 N/mm2 Non-alloyed and low-alloyed steels For blind holes
In stock37,86 € with VAT -
Machine tap short M7 HSS ISO2 B(6H) ISO529-D, FANAR
Quick machine tap M 7, straight groove Gradient: 1.0, basic Facing: ISO2 / 6H - Threaded profile Standard: ISO 529 D / DIN 13 Thread start: B, 3-4 feeds - see enclosed photo Material: HSS (Cutting steel) Cutting thread profile Application: 1.2: Structural and carbon steel, low alloy steel up to 500N / mm2 1.3: Structural and carbon steel, low alloy steel, steel up to 800N / mm2
On request5,90 € with VAT