Metric
-
Set of set hand taps and threaded eyes M3-M12 HSS, with drills and thread gauges
M3-M12 M3-M12 M3, M4, M5, M6, M8, M10 , M12 Taps for taps No. 2, clamping range (square) 2,5-7,1mm Eyelet: 25mm (others not needed, eyelets are the same diameter) Drill 2,5; 3.3; 4.2; 5; 6.8; 8.5; 10,2 Screwdriver Důlčík Threaded template Material: HSS - high-speed steel
In stock163,19 € with VAT -
Set of threaded eyes M3-M12 HSSE VA, MINI-1 D profi, CZTOOL
Set of circular jaws of Czech production MINI-1 Set of die-cut tools Range: M3-M12 Set contains: Circular jaws: M3, M4, M5, M6, M8, M10, M12 Eyelet: 25mm and 38mm, inserts 38/30 and 25/20 Material: HSSE VA - high-speed steel (HSS Co5), suitable for stainless steel
On request146,30 € with VAT -
Set of machine taps M3-M12 HSSE with chip breaker, VOLKEL
Set of machine taps with HSSE three-piece breaker The set contains taps: M3 / M4 / M5 / M6 / M8 / M10 - according to DIN371(reinforced shank) M12 - according to DIN376( "thin shank - common from M12 above) Tolerances: ISO2 / 6H Coating: uncoated Numerical of running teeth: B(4-5 teeth) Use - through hole: 1.3: Structural and carbon steel, low-alloy steel, steel castings up to 800N / mm2 2.2: Austenitic stainless steel up to 800N / mm2 < br> Cat.no.:47815
In stock84,83 € with VAT -
Machine tap set M3-M12 HSSE spiral groove, VOLKEL
Set of machine taps with spiral groove / set of HSSE spiral taps Set contains taps: M3 / M4 / M5 / M6 / M8 / M10 - according to DIN371(reinforced shank) < br> M12 - according to DIN376( "thin shank - common from M12 above) Tolerances: ISO2 / 6H Coating: without coating Number of tapping teeth: C(2-3 teeth) Use - blind hole: 1.3: Structural and carbon steel, low alloy steel, steel castings up to 800N / mm2 2.2: Austenitic stainless steel up to 800N / mm2 Cat.
On request84,83 € with VAT -
Machine tap set M3-M12 HSSE with chip breaker and drill set, VOLKEL
Set of machine taps with HSSE chip breaker The set contains taps: M3 / M4 / M5 / M6 / M8 / M10 - according to DIN371 ( reinforced shank) M12 - according to DIN376 (" thin shank - common from M12 up) Tolerance : ISO2 / 6H Coating : uncoated Number of leading teeth : B (4-5 teeth) Drills : 2 .5mm / 3.3mm / 4.2mm / 5.0mm / 6.8mm / 8.5mm / 10.2mm Usage - through hole : 1.3 : Structural and carbon steel, low-alloy steel, cast steel up to 800N/mm2 2.2 : Austenitic corrosion-resistant steel up to 800N/mm2 Cat. No. : 47835
In stock71,98 € with VAT -
Set of machine taps M3-M12 HSSE spiral groove and a set of drills, VOLKEL
Set of machine taps with spiral groove / set of HSSE spiral taps The set includes taps: M3 / M4 / M5 / M6 / M8 / M10 - according to DIN371 (reinforced shank) M12 - according to DIN376 (" thin shank - common from M12 up) Tolerance : ISO2 / 6H Coating : without coating Number of leading teeth : C (2-3 teeth) Drills: 2.5mm / 3.3mm / 4.2mm / 5.0mm / 6.8mm / 8.5mm / 10.2mm Usage - blind hole : 1.3 : Structural and carbon steel, low-alloy steel, cast steel up to 800N/mm2 2.2 : Austenitic corrosion-resistant steel up to 800N/mm2 Cat. No. : 47847
In stock97,28 € with VAT