Metric
-
Hand taps M - HSS DIN352 / DIN2181, VOLKEL
Metric hand tap Material: HSS (high speed steel) Fitting: ISO2 (6H) Standard: DIN352 / DIN2181 Dimensions - see attached catalog sheet In the set with basic pitch there are 3 pieces of taps, for fine pitch (MF) there are only 2 pieces of taps in the set HSS taps are suitable for tapping common steels (up to 800MPa)
from 2,70 € with VAT -
Left hand tap M - HSS DIN352, VOLKEL
Left metric hand tap Material: HSS (high speed steel) Fitting: ISO2 (6H) Standard: DIN352 / DIN2181 Dimensions - see enclosed catalog sheet In the set with basic pitch there are 3 pieces of taps, for fine pitch (MF) there are only 2 pieces of taps in the set HSS taps are suitable for tapping common steels (up to 800MPa)
from 14,19 € with VAT -
Hand tap M - HSSE DIN352 / DIN2181, VOLKEL
Metric hand tap Material: HSSE (high speed cobalt steel) Fitting: ISO2 (6H) Standard: DIN352 / DIN2181 Dimensions - see enclosed catalog sheet In the set with basic pitch there are 3 pieces of taps, for fine pitch (MF) there are only 2 pieces of taps in the set HSSE taps are suitable for thread cutting in common steels and stainless steels (up to 1200MPa)
from 15,55 € with VAT -
Hand tap M - HSSE PM TiCN HRC40 with guide pin, FANAR
Set tap made of sintered steel HSSE-PM There are 3 taps in the set for the basic pitch. For fine pitch, there are 2 taps in the set. The pre-cutting tap has an insert with a drill diameter under the thread Fitting: ISO2 / 6HX - ground thread profile Standard: DIN 352/3-P Material: HSSE-PM (High speed steel + 5% Cobalt, sintering) Coating: TiCN - Titanium Carbon Nitride Ground thread profile Usage: 1.4: Alloy steels, cold drawn tool steel up to 1000N / mm2 1.5: Hardened and hardened steels up to 38 HRC up to 1200N / mm2 2.1: Ferritic and martensitic stainless steel up to 1000N / mm2 2.3: Heat-resistant stainless steel up to 1100N / mm2 3.3: Ball and malleable cast iron up to 700N / mm2 3.4: Ball and malleable cast iron up to 1000N / mm2 1.3: Structural and carbon steel, low-alloy steel, steel castings up to 1100N / mm2 6.4: Bronze and aluminum up to 1200N / mm2 7.4: Aluminum alloys with silicon content Si> 10%, up to 400N / mm2 8.2: Thermosets and hardened plastics
from 34,74 € with VAT -
Hand tap M - HSSE OX ISO2 DIN352, NAREX
Metric hand tap M - set There are 3 taps in the set for the basic climb. There are 2 taps in a set for a gentle climb. Material: HSSE - high speed cobalt steel Povak: OX - oxidation Fitting: ISO2 / 6H Standard: DIN352 (replacement ČSN 22 3010 / CSN 223010) Usage: Structural, medium-alloy tool and heat-treated steels with strength up to 1100 MPa Stainless and heat-resistant steels up to 900 MPa Free-cutting, structural and heat-treated steels with a strength of up to 800 MPa Mild structural steels up to 500 MPa Gray, ductile and malleable cast iron Alloyed aluminum and copper alloys
from 8,62 € with VAT -
Hand tap M 14x1,5 NO 2N PN 8/3070, NAREX
Hand disposable nut tap M14x1,5 Gradient: 1,5, fine Facing: 2N Material: NO - Tool steel, Standard PN 8/3070, ČSN 223070 Kat . : 118141 Dimensions: l1 - 110mm l2 - 30mm d2 - 11.2mm a - 9.0mm Taps from NO are suitable for threading or single thread cutting.
In stock7,70 € with VAT