Manual - orchard and nut

BSF hand tap Thread type: British Standard whitworth Fine Climb: basic Fitting: medium Material: HSS - High speed steel Standard: DIN 2181 HSS taps are suitable for tapping common steels (up to 900MPa)

Armored set tap P / Pz / Pg Climb: basic Fitting: A Material: NO - Tool Steel Standard: PN 8/3014 NO taps are suitable for thread stretching or for piece thread cutting.

Hand tap Pz / Pg Thread type: armored thread Pitch: basic Material: HSS - High speed steel Standard: DIN 40432 HSS taps are suitable for tapping common steels (up to 800MPa)

Hand tap BA Thread type: British Association - model thread Thread apex angle: 47.5 °, rounded top and bottom of the thread Fitting: medium Material: HSS - High speed steel Standard: BA93, ISO529 HSS taps are suitable for tapping common steels (up to 900MPa)

Hand tap UNEF Thread type: American unified thread extra fine (it is a unification of American and British whitworth thread) Climb: gentle Matching: 2B Material: HSS - High speed steel Standard: ISO529, ANSI B1.1 HSS taps are suitable for tapping common steels (up to 800MPa)

Hand-held disposable nut tap Size and incline: according to the selected variant Fitting: ISO2 Material: HSS - High speed steel Standard: DIN357 Dimensions: - see attached catalog sheet

Hand disposable nut tap M14x1,5 Gradient: 1,5, fine Facing: 2N Material: NO - Tool steel, Standard PN 8/3070, ČSN 223070 Kat . : 118141 Dimensions: l1 - 110mm l2 - 30mm d2 - 11.2mm a - 9.0mm Taps from NO are suitable for threading or single thread cutting.

Hand orchard left tap M 12x1,0 - LH No. 1 - before cutting Pitch: 1,0, fine, ie M12x1,0 Material: HSS - High speed steel Fitting: ISO2 / 6H - ground thread profile Standard: ISO529

Machine tap M 6,5x0,75 - No.3 - Cutting Grade: 0,75, fine, ie M6,5x0,75 Material: HSS (high-speed steel)

Machine tap M 8x1.5 - set Pitch: 1.5, fine, i.e. M8x1.5 Tolerance: 6H Material: HSS(high-speed steel) Standard: DIN352

ČSN 22 3010 / CSN 223010 Metric hand tap M15 III Gauge: 1,5, fine, ie 15x1,5 (M15x1,5) Material: HSS (high-speed steel )

Standard: ČSN 22 3010 / CSN 223010 Metric manual set tap M3.5 I Pitch: 0.35, fine, i.e. 3.5x0.35( M3.5x0.35) Material: HSS ( high-speed steel)