Machine (fast cutting)
-
Forming tap M - HSSE-PM TiCN ISO2 E 6HX SR with cooling, FANAR
Recommended ✓WGN forming tap with lubrication groove with short lead and internal (2x drilling) cooling Form: E (1.5-2 ramps) Fitting: ISO 2, 6HX Material: HSSE - PM (High speed steel + 5% cobalt Co5) Coating: TiCN Standard: DIN371, DIN376 Usage: 1.1: Mild steels and magnetic steels up to 400N / mm2 1.2: Cutting steel, structural and case-hardening steels up to 500N / mm2 1.3: Structural and carbon steel, low-alloy steel, steel castings up to 800N / mm2 2.2: Austenitic stainless steel up to 850N / mm2 4.2: Aluminum alloys with silicon admixture from 1% to 7% 4.5: Zinc-doped long chipped copper
from 41,24 € with VAT -
Machine tap without chip breaker, final sale
Clearance saleMachine tap (high speed) without chip breaker Straight groove, ground thread profile Diameter and incline: according to the selected variant Form: according to the selected variant (rise length - see attached photo) Standard: CSN 22 3042 Material: according to the selected variant
from 2,44 € with VAT -
Machine tap with chip breaker, final sale
Clearance saleMachine tap (high speed) with chip breaker Straight groove, ground thread profile Diameter and incline: according to the selected variant Fitting and form: according to the chosen variant Standard: CSN 223043 Material: according to the selected variant
from 3,92 € with VAT -
Spiral machine tap , final sale
Clearance saleMachine spiral tap (high speed) Helix groove, ground thread profile Diameter and incline: according to the selected variant Fitting and form: according to the chosen variant Standard: CSN 223044 Material: according to the selected variant
from 4,90 € with VAT -
Machine tap NPT - HSSE, VOLKEL
Machine tap, straight groove, for conical pipe thread Thread type: NPT - American conical pipe thread Conicity: 1:16 Top angle: 60 ° Form: C Material: HSSE - High speed cobalt steel Usage: Well machinable materials up to 900 N / mm2 Non-alloy and low-alloy steels For manual and machine use For through holes
from 31,21 € with VAT -
Machine tap R - HSSE DIN2999, VOLKEL
Machine tap, straight groove, for conical pipe thread Thread type: R / Rc / BSPT - English taper pipe thread Conicity: 1:16 Top angle: 55 ° Form: C Material: HSSE - High speed cobalt steel Standard: DIN 2999, DIN 5156 Usage: Well machinable materials up to 900 N / mm2 Non-alloy and low-alloy steels For manual and machine use For through holes
from 28,69 € with VAT -
Machine tap Rd - HSSE DIN374 C, VOLKEL
Machine tap, straight groove, Thread type: Rd - round / articulated thread Angle between threads: 30 ° Form: C Tolerance: 7H Material: HSSE - High speed cobalt steel Standard: DIN 405 (ČSN 014037), DIN374 Usage: Well machinable materials up to 900 N / mm2 Non-alloy and low-alloy steels For manual and machine use For through holes
from 109,72 € with VAT -
Machine tap UNC - HSSE 2B with chip breaker, VOLKEL
Machine tap, straight groove with chip breaker, for American unified whitworth thread Thread type: UNC - American inch thread (UNified Coarse thread) Size: according to the chosen variant Matching: 2B Form: B Material: HSSE - High speed Steel + 5% cobalt Co5 Standard: ANSI B 1.1 Usage: Well machinable materials up to 900 N / mm2 Non-alloy and low-alloy steels For through holes
from 11,82 € with VAT -
Machine tap UNC - HSSE 2B spiral, VOLKEL
Machine tap spiral, for American unified whitworth thread Thread type: UNC (UNified thread Coarse) - American inch unified coarse thread Size: according to the chosen variant Matching: 2B Form: C Helix: 35 ° Material: HSSE - High speed Steel + 5% cobalt Co5 Standard: ANSI B 1.1 Usage: Well machinable materials up to 900 N / mm2 Non-alloy and low-alloy steels For blind holes
from 14,69 € with VAT