Machine (fast cutting)
-
Machine tap BSC 9/32 x 26 HSS, CZTOOL
Machine tap, straight groove, BSCy cyclo thread Size: 9/32" Pitch: 26 steps per inch Form: C Top angle of thread: 60° Material: HSS - High Speed ??Steel 5% Cobalt Co5 Use: Well machinable materials up to 900 N/mm2 Non-alloyed and low-alloyed steels For through holes
On request178,41 € with VAT -
Machine tap BSF 1 1/8" x 9 HSS DIN374 C, CZTOOL
Machine tap ( high-speed ) BSF 1-1/8", straight slot, custom made Pitch: 9 turns per inch, fine Standard: DIN 371 Thread start: B, 4 courses - see attached photo Material: HSS Grounded thread profile Usage: Unalloyed steel with strength up to 800N/ mm2 Brass with a long chip Unalloyed and low-alloyed copper alloys Aluminum alloys with Si content < 5% Thermoplastics
On request15,03 € with VAT -
Machine tap UN 1-5/16 - 12 2B HSSE, CZTOOL
Machine Tap, Straight Groove for American Unified Inch Thread Size: UN 1-5/16" x 12 Pitch: 12 pitches per inch Fit: 2B Form: B Material: HSSE - High Speed ??Steel Usage: Well machinable materials up to 600 N/mm2 Unalloyed and low alloy steels For through holes
On request290,11 € with VAT -
Machine tap UN 13/16 - 16 2B HSS, CZTOOL
Machine Tap, Straight Groove for American Unified Inch Thread Size: UN 13/16" x 16 Pitch: 16 pitches per inch Fit: 2B Form: B Material : HSS - High Speed ??Steel Usage : Well machinable materials up to 600 N/mm2 Non-alloyed and low-alloyed steels For through holes
On request147,96 € with VAT -
Machine tap UN 11/16 - 16 2B HSSE spiral 35°, CZTOOL
Machine Tap, Spiral Groove for American Unified Inch Thread Size: UN 11/16" x 16 Pitch: 16 Pitches per Inch Fit: 2B Shape: C Angle spiral grooves: 35° Material: HSSE Use: Well machinable materials up to 800 N/mm2 Non-alloyed and low-alloyed steels For through holes
In stock168,26 € with VAT -
Machine tap UN 11/16 - 20 2B HSSE spiral 35°, CZTOOL
Machine Tap, Spiral Groove for American Unified Inch Thread Size: UN 11/16" x 20 Pitch: 20 Pitches per Inch Fit: 2B Shape: C Angle spiral grooves: 35° Material: HSSE Use: Well machinable materials up to 800 N/mm2 Non-alloyed and low-alloyed steels For through holes
On request168,26 € with VAT -
Machine tap M12 HSSE-PM GAL TiCN ISO2(6H) DIN376 with chip breaker, FANAR
Machine tap( speed cutter 29 M 12 with chip breaker, straight groove Pitch: 1.75, basic Faceted ISO2 / 6H - ground thread profile Standard: DIN 376 Thread start: B, 4 turns - see attached photo Material : HSSE-PM( High speed steel 5% Cobalt, sintering) Grinding thread profile Coating: TiCN - Carbon-Nitride Titanium Use: Use: 4.2: Aluminum with silicon content: 1%
In stock23,74 € with VAT -
Machine tap M3.5 HSSE ISO2 C (6H) DIN376 for brass, FANAR
Machine tap (quick-cutting) M 3.5, straight groove Slope: 0.6, basic Fitting: ISO2 / 6H - ground thread profile Standard: DIN 376 Thread start: C, 2 courses - see attached photo Material: HSSE (High speed steel +5% Cobalt) Grounded thread profile Usage: Brass with a long chip Structural and carbon steel, low-alloy steel, cast steel up to 800N/mm2 Automatic steel, structural and cement steel Spherical and malleable cast iron Unalloyed and low-alloyed copper alloys Aluminum alloys with Si content < 5% Thermoplastics
In stock10,74 € with VAT -
Machine tap M12 left HSSE ISO3(6G) DIN376 with chip breaker, FANAR
Left machine tap( speed cutter) M 12 with breaker for chisels, straight groove Climbs nA: 1,75, basic Fitting: ISO3 / 6G - grinding profile thread Standard: DIN 376 Thread thread: B, 4 courses - see attached photo Material: HSSE( High speed steel 5% Cobalt) Grinding profile thread Application: < br> Construction and carbon steel, low-alloyed steel, cast steel up to 800N / mm2 Brass with long cutting Automatic steel, structural and case-hardening steel Spherical and malleable cast iron Non-alloy and low-alloyed copper alloys Aluminum aluminum containing Si
In stock58,89 € with VAT -
Machine tap M12 HSSE GAL ISO2(6HX) DIN376 spiral (45°), FANAR
Machine spiral tap( quick cut) M 12, R45 SE 800 Size: M12x1,75 Pitch: 1,75, basic Fitting: ISO2 / 6HX - ground thread profile Standard: DIN 376 C Thread start: C, 2 steps - see attached photo Materials !L: HSSE( High speed steel 5% Cobalt) Coating: uncoated Helix angle: 45 ° Application: 4.2: Aluminum with silicon content: 1%
In stock24,07 € with VAT -
Machine tap UN 11/16 x 20 HSSE 2B DIN374 spiral (40°) , FANAR
Machine spiral tap ( high-speed ) UN 11/16x20, R40 SE 800 Size: UN 11/16 x 20 Pitch: 20 steps per inch Fit: 2B, ground thread profile Standard: DIN 374 C Thread pitch: C, 2 courses - see attached photo Material: HSSE ( High-speed steel 5% Cobalt ) Coating: no coating Helix angle: 40° Usage: Structural and carbon steel, low alloy steel, cast steel up to 800N/mm2 Brass with a long chip Automatic steel, structural and cement steel Spherical and malleable cast iron Unalloyed and low-alloyed copper alloys Aluminum alloys with Si content < 5% Thermoplastics
On request100,13 € with VAT -
Machine tap 1 1/16 "UNS HSSE DIN374 spiral (40°), FANAR
Machine Spiral Tap( Quick Cut) UNS 1.1 / 16 ", R40 SE 800 Size: UNS 1-1 / 16" Ascent: 14 walk to inch Standard: DIN 374 C Run thread: C, 2 courses - see enclosed photo Material: HSSE( High speed steel 5% Cobalt) Coating: without coating angle helix: 40 Â ° < br> Usage: Construction and carbon steel, low-alloyed steel, cast steel up to 800N / mm2 Brass with long cutting Free-cutting steel, construction and cementing steel Spherical and malleable cast iron Non-alloy and low-alloyed alloys copper Alloys aluminum containing Si
On request140,71 € with VAT
