Machine (fast cutting)

Right machine tap, straight slot with chip breaker, for metric thread - with hexagon for cordless drill Size: according to the selected variant Other dimensions - see the attached catalog sheet Form : B Material: HSSE - High Speed Steel + 5% Cobalt Co5 Standard: DIN371 (M12 DIN376) Usage : Well machinable materials up to 900 N/mm2 Unalloyed and low-alloyed steels For through holes

Right machine tap with spiral groove, for metric thread - with hexagon for battery drill Size: according to the selected variant Other dimensions - see the attached catalog sheet Form : C Helix angle: 15° Material: HSSE - High Speed Steel + 5% Cobalt Co5 Standard: DIN371 (M12 DIN376) Usage : Well machinable materials up to 900 N/mm2 Unalloyed and low-alloyed steels For blind holes

Machine tap( quick cut) M 5, straight groove Pitch: 0,8, basic Fitting: ISO2 / 6H - grinding Thread profile Standard: DIN 371 Thread start: C, 2-3 turns - see attached photo Material: HSSE( Speed cutting steel 5% Cobalt) Thread grinding profile Application: 1.2: Non-alloy cast steel 2.2: Construction and stainless steel 8.1: Aluminum alloyed with Si content 10% 10.1: Copper alloys with short brittle chips

M3-M12 M3, M4, M5, M6, M8, M10, M12, CSN 223043 (straight groove with chip breaker) Taps: M3, M4, M5, M6, M8, M10, M12, PN 8/3044 (spiral groove) Taps for DIN 1814 Taps Material: HSSE - high-speed steel (HSS Co5)

Machine spiral tap M 3 Size: M3x0,5 Gradient: 0,45, basic Facing: ISO2 / 6H - Cut thread profile DIN 371 C < br> Thread Start: C, 2 Steps - See attached photo Material: HSSE (5% Cobalt Rapid Steel) TiN (Nitride Titanium) Helix Angle: 35 ° Application: 2.2: Structural and heat-treated steels up to 800 N / mm2 2.3: Unalloyed cast steel with strength up to 800 N / mm2 8.1: / b> 6.2: Alloy and tempered cast iron 8.2: Aluminum alloyed with Si content> 10% 10.2: Copper alloy with long corrugated chip

Machine tap ( high-speed ) M 3, straight groove Pitch: 0.5, basic Fit: ISO2 / 6H - ground thread profile Standard: DIN 376 Thread lead: C, 2-3 courses - see attached photo Material: HSSE ( High-speed steel 5% Cobalt ) Grounded thread profile Usage: 1.2: Non-alloyed cast steels 2.2 : Structural and refined steels 8.1 : Aluminum alloy with Si content < 10% 1.1 : Mild structural steels with strength up to 500 N/mm2 2.1 : Automatic and structural steels with a strength of up to 800 N/mm2 2.3 : Unalloyed cast steels with a strength of up to 800 N/mm2 6.2 : Ductile and malleable cast iron 8.2 : Alloyed aluminum with a Si content > 10% 10.1 : Copper alloys with a short friable chip

Machine tap ( quick-cutting ) M 6, straight groove Pitch: 1.0, basic Fit: ISO2 / 6H - ground thread profile Standard: DIN 376 Thread lead: C, 2-3 courses - see attached photo Material: HSSE ( High-speed steel 5% Cobalt ) Grounded thread profile Usage: 1.2: Non-alloyed cast steels 2.2 : Structural and refined steels 8.1 : Aluminum alloy with Si content < 10% 1.1 : Mild structural steels with strength up to 500 N/mm2 2.1 : Automatic and structural steels with a strength of up to 800 N/mm2 2.3 : Unalloyed cast steels with a strength of up to 800 N/mm2 6.2 : Ductile and malleable cast iron 8.2 : Alloyed aluminum with Si content > 10% 10.1 : Copper alloys with a short friable chip

Machine tap ( quick-cutting ) M 10, straight groove Pitch: 1.5, basic Fit: ISO2 / 6H - ground thread profile Standard: DIN 376 Thread lead: C, 2-3 courses - see attached photo Material: HSSE ( High-speed steel 5% Cobalt ) Grounded thread profile Usage: 1.2: Non-alloyed cast steels 2.2 : Structural and refined steels 8.1 : Aluminum alloy with Si content < 10% 1.1 : Mild structural steels with strength up to 500 N/mm2 2.1 : Automatic and structural steels with a strength of up to 800 N/mm2 2.3 : Unalloyed cast steels with a strength of up to 800 N/mm2 6.2 : Ductile and malleable cast iron 8.2 : Alloyed aluminum with a Si content > 10% 10.1 : Copper alloys with a short friable chip

Set of machine taps with HSSE three-piece breaker The set contains taps: M3 / M4 / M5 / M6 / M8 / M10 - according to DIN371(reinforced shank) M12 - according to DIN376( "thin shank - common from M12 above) Tolerances: ISO2 / 6H Coating: uncoated Numerical of running teeth: B(4-5 teeth) Use - through hole: 1.3: Structural and carbon steel, low-alloy steel, steel castings up to 800N / mm2 2.2: Austenitic stainless steel up to 800N / mm2 < br> Cat.no.:47815

Set of machine taps with spiral groove / set of HSSE spiral taps Set contains taps: M3 / M4 / M5 / M6 / M8 / M10 - according to DIN371(reinforced shank) < br> M12 - according to DIN376( "thin shank - common from M12 above) Tolerances: ISO2 / 6H Coating: without coating Number of tapping teeth: C(2-3 teeth) Use - blind hole: 1.3: Structural and carbon steel, low alloy steel, steel castings up to 800N / mm2 2.2: Austenitic stainless steel up to 800N / mm2 Cat.

Set of machine taps with HSSE chip breaker The set contains taps: M3 / M4 / M5 / M6 / M8 / M10 - according to DIN371 ( reinforced shank) M12 - according to DIN376 (" thin shank - common from M12 up) Tolerance : ISO2 / 6H Coating : uncoated Number of leading teeth : B (4-5 teeth) Drills : 2 .5mm / 3.3mm / 4.2mm / 5.0mm / 6.8mm / 8.5mm / 10.2mm Usage - through hole : 1.3 : Structural and carbon steel, low-alloy steel, cast steel up to 800N/mm2 2.2 : Austenitic corrosion-resistant steel up to 800N/mm2 Cat. No. : 47835

Set of machine taps with spiral groove / set of HSSE spiral taps The set includes taps: M3 / M4 / M5 / M6 / M8 / M10 - according to DIN371 (reinforced shank) M12 - according to DIN376 (" thin shank - common from M12 up) Tolerance : ISO2 / 6H Coating : without coating Number of leading teeth : C (2-3 teeth) Drills: 2.5mm / 3.3mm / 4.2mm / 5.0mm / 6.8mm / 8.5mm / 10.2mm Usage - blind hole : 1.3 : Structural and carbon steel, low-alloy steel, cast steel up to 800N/mm2 2.2 : Austenitic corrosion-resistant steel up to 800N/mm2 Cat. No. : 47847