Inches
-
Machine tap UNC - HSSE PM-FAN TiAlSiN 2B spiral (40 °), FANAR
Recommended ✓Machine spiral tap (high speed) R40 PM TC 1200 in FAN helix Thread type: UNC (UNified thread Coarse) - American inch unified coarse thread Matching: 2B Material: HSSE-PM (High speed steel + 5% Cobalt, sintering production) Coating: TiAlSiN Top thread angle: 60 ° Helix angle: 40 ° Thread lead: C, 2 turns - see attached photo Ground thread profile Standard: DIN 371, DIN376 Usage: 1.4: Alloy steels, cold drawn tool steel up to 1000N / mm2 1.5: Hardened and hardened steels up to 38 HRC up to 1200N / mm2 2.1: Ferritic and martensitic stainless steel up to 1000N / mm2 2.3: Heat-resistant stainless steel up to 1100N / mm2 3.3: Ball and malleable cast iron up to 700N / mm2 3.4: Ball and malleable cast iron up to 1000N / mm2 1.3: Structural and carbon steel, low-alloy steel, steel castings up to 1100N / mm2 6.4: Bronze and aluminum up to 1200N / mm2 7.4: Aluminum alloys with silicon content Si> 10%, up to 400N / mm2 8.2: Thermosets and hardened plastics
from 31,13 € with VAT -
Machine tap UNF - HSSE PM-FAN TiAlSiN 2B spiral (40 °), FANAR
Recommended ✓Machine spiral tap (high speed) R40 PM TC 1200 in FAN helix Thread type: UNF (UNified thread Fine) - American inch unified fine thread Matching: 2B Material: HSSE-PM (High speed steel + 5% Cobalt, sintering production) Coating: TiAlSiN Top thread angle: 60 ° Helix angle: 40 ° Thread lead: C, 2 turns - see attached photo Ground thread profile Standard: DIN 371, DIN374 Usage: 1.4: Alloy steels, cold drawn tool steel up to 1000N / mm2 1.5: Hardened and hardened steels up to 38 HRC up to 1200N / mm2 2.1: Ferritic and martensitic stainless steel up to 1000N / mm2 2.3: Heat-resistant stainless steel up to 1100N / mm2 3.3: Ball and malleable cast iron up to 700N / mm2 3.4: Ball and malleable cast iron up to 1000N / mm2 1.3: Structural and carbon steel, low-alloy steel, steel castings up to 1100N / mm2 6.4: Bronze and aluminum up to 1200N / mm2 7.4: Aluminum alloys with silicon content Si> 10%, up to 400N / mm2 8.2: Thermosets and hardened plastics
Price - On request -
Machine tap UN - HSSE ISO529 2B with chip breaker, VOLKEL
Machine tap, straight groove with chip breaker, for American unified thread Thread type: UN - American unified thread (UNified thread) Here you will find special types of climbs - outside the regular range Size: according to the chosen variant Top thread angle: 60 ° Form: B Material: HSSE - High speed Steel + 5% cobalt Co5 Standard: ISO529 Usage: Well machinable materials up to 900 N / mm2 Non-alloy and low-alloy steels For through holes
from 13,65 € with VAT -
Machine tap UNS - HSSE ISO529 2B with chip breaker, VOLKEL
Machine tap, straight groove with chip breaker, for American unified thread Thread type: UNS - American unified thread Special (UNified thread Special) Here you will find special types of climbs - outside the regular range Size: according to the chosen variant Form: B Material: HSSE - High speed Steel + 5% cobalt Co5 Standard: ISO529 Usage: Well machinable materials up to 900 N / mm2 Non-alloy and low-alloy steels For through holes
from 10,81 € with VAT -
Machine tap G - HSSE (TiN) DIN5156, VOLKEL
Machine tap BSP, straight slot, for pipe thread Thread type: English standard inch whitworth thread - British Standard Pipe thread Size: according to the chosen variant Top angle: 55 ° Form: C Material: HSSE - High speed Steel + 5% cobalt Co5 Coating: according to the selected variant Standard: DIN 5156, DIN ISO 228 Usage: Well machinable materials up to 900 N / mm2 Non-alloy and low-alloy steels For manual and machine use For through and blind holes
from 19,11 € with VAT -
Machine tap G - HSSE INOX DIN5156 with chip breaker, VOLKEL
BSP machine tap, straight groove + chip breaker, for pipe thread Thread type: English standard inch whitworth thread - British Standard Pipe thread Size: according to the chosen variant Top angle: 55 ° Form: B Material: HSSE - High speed steel + 5% cobalt Co5 Coating: Vaporization - black Standard: DIN 5156 Usage: Stainless materials forming a long chip, up to a strength of 1000 N / mm2 High-alloyed Cr steel Hard-to-machine materials For through holes
from 27,06 € with VAT -
Machine tap G - HSSE (TiN) with chip breaker DIN5156, VOLKEL
BSP machine tap, straight groove + chip breaker, for pipe thread Thread type: English standard inch whitworth thread - British Standard Pipe thread Size: according to the chosen variant Top angle: 55 ° Form: B Material: HSSE - High speed steel + 5% cobalt Co5 Coating: according to the selected variant Standard: DIN 5156 Usage: Well machinable materials up to 900 N / mm2 Non-alloy and low-alloy steels For manual and machine use For through holes
from 19,11 € with VAT -
Machine tap G - HSSE spiral DIN5156, VOLKEL
BSP machine tap with helical groove in helix, for pipe thread Thread type: English standard inch whitworth thread - British Standard Pipe thread Size: according to the chosen variant Top angle: 55 ° Form: C Material: HSSE - High speed steel + 5% cobalt Co5 Coating: according to the selected variant Standard: DIN 5156 Usage: Well machinable materials up to 900 N / mm2 Non-alloy and low-alloy steels For manual and machine use For blind holes
from 25,01 € with VAT -
Machine tap G - HSSE with chip breaker DIN5156-B, FANAR
Machine tap G / BSP, straight groove + chip breaker, for pipe thread Thread type: G / BSP - British Standard Pipe thread Top angle: 55 ° Form: B Material: HSSE - High speed cobalt steel (HSSCo5) Standard: DIN 5156, DIN ISO 228 Usage: Structural and carbon steel, low-alloy steel, steel castings up to 800N / mm2 Brass with a long chip Free-cutting steel, structural and case-hardening steel Spherical and malleable cast iron Non-alloy and low-alloy copper alloys Aluminum alloys with Si content
from 17,28 € with VAT -
Machine tap G - HSSE INOX with chip breaker DIN5156-B, FANAR
Machine tap G / BSP, straight groove + chip breaker, for pipe thread Thread type: G / BSP - British Standard Pipe thread Top angle: 55 ° Form: B Material: HSSE - High speed cobalt steel (HSSCo5) Standard: DIN 5156, DIN ISO 228 Usage: Structural and carbon steel, low-alloy steel, steel castings up to 800N / mm2 Brass with a long chip Free-cutting steel, structural and case-hardening steel Spherical and malleable cast iron Non-alloy and low-alloy copper alloys Aluminum alloys with Si content
from 20,16 € with VAT -
Machine tap G - HSSE PM HL MasterTap DIN5156 with chip breaker, FANAR
Machine G - tubular spiral tap (quick-cutting) PM with chip breaker Thread start: B, 4 courses - see attached photo Material: HSSE-PM (High-speed steel +5% Cobalt, production by sintering) Coating : HL - Balinit HardLube with carbide component (TiAlN + WC / C) with hardness 2600 HV Standard: DIN5156, DIN ISO228 Grounded thread profile Usage: Universal - for steels, stainless steels, cast iron, non-ferrous metals and heat-resistant steels, can be used in emergencies and for piece cutting of threads in hardened steel. Suitable for machining centers, possibly also for older types of numerical and conventional machines with lower performance.
from 32,95 € with VAT -
Machine tap G - HSSE spiral DIN5156-C (40 °), FANAR
Machine spiral tap G / BSP (high speed) in helix Thread type: G / BSP - British Standard Pipe thread Thread lead: C, 2-3 turns - see attached photo Material: HSSE - High speed cobalt steel (HSSCo5) Coating: uncoated Thread apex angle: 55 ° Helix angle: 40 ° Standard: DIN5156, DIN ISO228 Ground thread profile Usage: Structural and carbon steel, low-alloy steel, steel castings up to 800N / mm2 Brass with a long chip Free-cutting steel, structural and case-hardening steel Spherical and malleable cast iron Non-alloy and low-alloy copper alloys Aluminum alloys with Si content
from 19,87 € with VAT