For steel

Machine spiral tap for NC / CNC machines (quick-cutting) in S-NC helix Fitting: ISO2 / 6HX - ground thread profile Standard: DIN 371 Thread start: C, 2 courses - see the attached photo Material: HSSE-PM (High-speed steel +5% Cobalt, production by sintering) Grounded thread profile Coating: TiCN - Titanium Carbon Nitride Helix angle: 45° Usage: 1.3 : Structural and carbon steel, low-alloy steel, cast steel up to 1100N/mm2 1.4 : Alloy steels, cold drawn tool steel up to 1000N/mm2 2.1 : Ferritic and martensitic stainless steel up to 1000N/mm2 3.3 : Nodular and malleable cast iron up to 700N/mm2 3.4 : Nodular and malleable cast iron up to 1000N/mm2 1.1 : Magnetic and soft structural steel up to 400M/mm2 1.2 : Structural and automatic steel up to 500N/mm2 1.5 : Hardened and hardened steels up to 38 HRC up to 1200N/mm2 2.2 : Austenitic steel up to 850N/mm2 2.3 : Heat-resistant corrosion-resistant steel up to 1100N/mm2 4.4 : Copper and its alloys up to 400N/mm2 4.5 : Brass up to 600 N/mm2 4.7 : Aluminum and copper alloys with long chips up to 800N/mm2 4.8 : Aluminum and zinc alloys with long chips up to 800N/mm2 6.3 : Brass with a long chip up to 700N/mm2 7.2: Aluminum alloys with silicon content up to 5%, up to 700N/mm2 7.3 : Aluminum alloys with silicon content from 5% to 10%, up to 400N/mm2 This tap is intended for NC machines - synchronized thread cutting

Machine tap, spiral - helix, for metric thread Tolerance: ISO2 / 6H Form: C (lead 2-3 threads) Material: HSSE - High speed cobalt steel Standard: DIN 371 / DIN 376 Usage: Well machinable materials up to 900 N / mm2 Non-alloy and low-alloy steels For blind holes

Left machine tap, spiral - helix, for metric thread Tolerance: ISO2 / 6H Form: C (lead 2-3 threads) Material: HSSE - High speed cobalt steel Standard: DIN 371 / DIN 376 Usage: Well machinable materials up to 900 N / mm2 Non-alloy and low-alloy steels For blind holes

Extended / extra long machine tap with spiral groove, for metric thread Tolerance: ISO2 / 6H Form: C (lead 2-3 threads) Material: HSSE - High speed cobalt steel Standard: DIN 371 / DIN 376 Usage: Well machinable materials up to 900 N / mm2 Non-alloy and low-alloy steels For blind holes

Machine tap (high speed) spiral groove / in helix Fitting: 2N (medium tolerance) Rise: C (2-3 ramps) Rolled thread profile Material: HSS or HSSE (HSSCo5) Usage: Non-alloy steels with strength up to 600 N / mm2 (HSS) Non-alloy steels with strength up to 800 N / mm2 (HSSE) Soft materials (brass, copper, aluminum) Rolled taps with a medium tolerance of 2N are suitable for common screw connections - without thread tolerance requirements. Threading

Machine tap (high speed) spiral groove / in helix with ground thread profile Fitting: ISO1 / 4H - ground thread profile (tight thread - eg aerospace industry, etc.) Material: HSSE (High speed steel + 5% Cobalt) Standard: CSN 22 3044 / PN 8/3044 (up to M10 reinforced shank, from M12 classic shank) These taps can also be supplied coated (TiN) on request.

Machine tap( high speed) helical groove / in helix with ground thread profile Fitting: ISO2 / 6H - ground thread profile, standard tolerance Material: HSSE( High speed steel 5% Cobalt) Standard: DIN371 / DIN376 These taps can be supplied on request coated with 28TiN)

Machine spiral tap M 3 Size: M3x0,5 Gradient: 0,45, basic Facing: ISO2 / 6H - Cut thread profile DIN 371 C < br> Thread Start: C, 2 Steps - See attached photo Material: HSSE (5% Cobalt Rapid Steel) TiN (Nitride Titanium) Helix Angle: 35 ° Application: 2.2: Structural and heat-treated steels up to 800 N / mm2 2.3: Unalloyed cast steel with strength up to 800 N / mm2 8.1: / b> 6.2: Alloy and tempered cast iron 8.2: Aluminum alloyed with Si content> 10% 10.2: Copper alloy with long corrugated chip

Machine tap, spiral - helix, for metric thread Size: M20 / 20x2.5 Pitch: 2.5 Spiral: 35° Form: C Material: HSS - High-speed steel Standard: ISO 529 Usage: Well machinable materials up to 800 N/mm2 Non-alloyed and low-alloyed steels For blind holes

Set of machine taps with spiral groove / set of spiral taps HSSE OX The set includes taps: M3 / M4 / M5 / M6 / M8 / M10 - according to DIN371 (reinforced shank) M12 - according to DIN376 ("thin shank - common from M12 upwards) Tolerance: ISO2 / 6H Material: HSSE Coating: OX - Oxidation Number of lead teeth: C (2-3 teeth) Usage - blind hole : 1.3 : Structural and carbon steel, low-alloy steel, cast steel up to 800N/mm2 2.2 : Austenitic corrosion-resistant steel up to 800N/mm2 Cat. no.: Z2-085015-0000

Set of machine taps with spiral groove / set of spiral taps HSSE 800X Set contains taps: M3 / M4 / M5 / M6 / M8 / M10 - according to DIN371(reinforced shank) M12 - according to DIN376( "thin shank - common from M12 up to) Tolerance: ISO2 / 6H Coating: TiN - Titanium Nitride Number of lead teeth: C(2-3 teeth) Application - blind hole: 2.1: Ferritic and martensitic stainless steel up to 1000N / mm2 2.2: Austenitic stainless steel up to 850N / mm2 1.3: Structural and carbon steel, low-alloy steel, steel castings up to 1100N / mm2 1.4: Alloy steels, cold-drawn tool steel up to 1000N / mm2 2.3: Heat-resistant stainless steel up to 1100N / mm2 - Food grade stainless steel(does not increase thread, holds prescribed tolerance) Cat. No: Z2-513X15-0310

Set of machine taps, spiral groove HSSE-PM HL The set includes taps: M3 / M4 / M5 / M6 / M8 / M10 - according to DIN371 (reinforced shank) Tolerance: ISO2 / 6H Material : HSSE-PM (sintered cobalt steel) Coating : HL - Balinit HardLube with carbide component (TiAlN + WC / C) with hardness 2600 HV Number of lead-in teeth: C (2-3 teeth) Usage - blind hole : Universal - for steels, stainless steels, cast iron, non-ferrous metals and heat-resistant steels, can be used in emergencies and for piece cutting of threads in hardened steel. Suitable for machining centers, possibly also for older types of numerical and conventional machines with lower performance. Cat. no.: Z4-528M15-0310