For aluminum
-
Machine tap M - HSSE-PM TiAlSiN GAL ISO2(6H) spiral (15°), FANAR
Machine spiral tap (high speed) R15 SE 800 Fitting: ISO2 / 6H - ground thread profile Standard: DIN 371 C Thread lead: C, 2 turns - see attached photo Material: HSSE-PM (High speed steel + 5% Cobalt, sintering) Coating: TiAlSiN Helix angle: 15 ° Usage: 4.2: Aluminum with silicon content: 1%
from 12,92 € with VAT -
Machine tap M - HSSE AL ISO2(6H) spiral (45°), FANAR
Machine spiral tap (high speed), R45 SE 800 Fitting: ISO2 / 6H - ground thread profile Thread lead: C, 2 turns - see attached photo Material: HSSE (High speed steel + 5% Cobalt) Coating: uncoated Helix angle: 45 ° Usage: 7.1: Aluminum 1.1: Mild, ductile and magnetic steels with strength up to 400N / mm2 6.1: Copper and copper alloys
from 10,43 € with VAT -
Machine tap M12 HSSE GAL ISO2(6HX) DIN376 spiral (45°), FANAR
Machine spiral tap( quick cut) M 12, R45 SE 800 Size: M12x1,75 Pitch: 1,75, basic Fitting: ISO2 / 6HX - ground thread profile Standard: DIN 376 C Thread start: C, 2 steps - see attached photo Materials !L: HSSE( High speed steel 5% Cobalt) Coating: uncoated Helix angle: 45 ° Application: 4.2: Aluminum with silicon content: 1%
In stock24,37 € with VAT -
Set of machine taps M3-M12 HSSE 800X spiral groove, FANAR
Set of machine taps with spiral groove / set of spiral taps HSSE 800X Set contains taps: M3 / M4 / M5 / M6 / M8 / M10 - according to DIN371(reinforced shank) M12 - according to DIN376( "thin shank - common from M12 up to) Tolerance: ISO2 / 6H Coating: TiN - Titanium Nitride Number of lead teeth: C(2-3 teeth) Application - blind hole: 2.1: Ferritic and martensitic stainless steel up to 1000N / mm2 2.2: Austenitic stainless steel up to 850N / mm2 1.3: Structural and carbon steel, low-alloy steel, steel castings up to 1100N / mm2 1.4: Alloy steels, cold-drawn tool steel up to 1000N / mm2 2.3: Heat-resistant stainless steel up to 1100N / mm2 - Food grade stainless steel(does not increase thread, holds prescribed tolerance) Cat. No: Z2-513X15-0310
In stock132,92 € with VAT -
Machine tap set M3-M10 HSSE-PM HL MasterTap with spiral groove, FANAR
Set of machine taps, spiral groove HSSE-PM HL The set includes taps: M3 / M4 / M5 / M6 / M8 / M10 - according to DIN371 (reinforced shank) Tolerance: ISO2 / 6H Material : HSSE-PM (sintered cobalt steel) Coating : HL - Balinit HardLube with carbide component (TiAlN + WC / C) with hardness 2600 HV Number of lead-in teeth: C (2-3 teeth) Usage - blind hole : Universal - for steels, stainless steels, cast iron, non-ferrous metals and heat-resistant steels, can be used in emergencies and for piece cutting of threads in hardened steel. Suitable for machining centers, possibly also for older types of numerical and conventional machines with lower performance. Cat. no.: Z4-528M15-0310
In stock120,96 € with VAT