Drilling

Metal drill head with handle and cut jaws, up to 4mm drill bit Cutting jaws Chuck precision: 0,18mm Drill bits: 0,3-4mm, cone JT0 thorn MK2 - Supplied with MK2 thorn Body Diameter: 22mm, total head height 29 / 36mm Diameter hole for loop: 3mm CSN 241320 / CSN 24 1320

Self-locking chuck - precise quick-release head 1-13mm, type SOLID Clamping cone: R8 Outer diameter of chuck: 51mm Total length: 184mm / 195mm Throw:

Self-locking chuck - exact quick-release head 1-16mm, type SOLID Clamping cone: R8 Outer diameter of chuck: 57mm Total length: 195mm / 210mm Throw:

Plastic drill head with quick-release / self-locking chuck up to 10mm drill bit Clamping range: 0.8-10mm Clamping thread: 1/2 "x 20 UNF, 20 strokes per inch (equivalent to 12 , 7mm) Body Diameter: 41mm Total Height: 50 / 61mm Usage: Narex Classical and Battery Drills, etc. If you change the chuck look at the body of the existing chucks where the clamping thread should be provided.

Clamping range: 0.8-10mm Clamping thread: 3/8 "x 24 UNF, 24 strokes per inch (equivalent to 9,525 mm) Body Diameter: 41mm Total Height: 50 / 61mm Usage: Handheld Classic and Battery Drills Black

Clamping range: 2-13mm Clamping thread: 1/2 "x 20 UNF, 20 strokes per inch (corresponds to 12.7mm) Body Diameter: 43mm Total Height: 63 / 74mm Usage: Narex Classical and Battery Drills. on the body of the existing chuck where the clamping thread should be provided.

Clamping range: 2-13mm Clamping thread: 1/2 "x 20 UNF, 20 strokes per inch (equivalent to 12.7mm ) Body Diameter: 43mm Total Height: 62 / 74mm Usage: Narex Classical and Battery Drills, etc. If you change the chuck look at the body of the existing chuck, where the clamping thread should be provided.

Clamping range: 2-13mm Clamping thread: 3/8 "x 24 UNF, 24 strokes per inch (equivalent to 9,525mm) Body Diameter: 43mm Total Height: 62 / 74mm Usage: Handheld Classic and Battery Drills Black

ER11 collet holder with cylindrical shank 16mm, L=150mm Collet holder, collet head for NC - ER 11, cylindrical shank with weldon surface Clamping range of ER11 clamp: 1.0 - 7.0mm Diameter of the clamping shank: 16 mm Length of the clamping part: 100mm Total length of the clamp: 120mm Diameter of the through hole: 7.9mm Diameter of clamping nut: hexagon 19mm Nut thread: M14x0.75 Throwability: up to 0.005mm Balance: G2.5 / 20,000 rpm ER11 collets (outer diameter 11mm) can be purchased separately - see related products Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture. Usage : Clamping of drills, cutters and other tools with a cylindrical shank As a tap without length compensation and reversal - for clamping taps Clamping possible in a collet and in a weldon clamp.

Practical Hinged Pivot Wrench for 10mm and 12mm Screws Material: Cr-V, Chrom-Vanadium

Drill stepped in metal, steel plate, acrylic glass and not. metal up to 4mm Range: 4-12mm (Step 2mm) Material HSS - High-speed steel TiN coating Shank diameter: 6mm 8mm clamping with three flats for better fit. Stepped spiral drills

Bracket, brace for clamping bi-metal crowns with diameters 14-30mm Drill bit diameter: 6,5mm Hexagon for clamping: 10mm For clamping crowns diameters 14-30mm