Clamping tools and fixtures
-
Spot weld drill GP-921A, GISON
Professional pneumatic milling machine / drill / drill for spot welds, suitable for example. for drilling spot welds and other milling work - high power, lower air consumption and noise Speed: 1400 rpm Drill / cutter for: 8mm Air consumption: 0.4 m3 / min Maximum pressure: 6.2 bar Total length: 310mm Inlet fitting: 1/4 " Min. Air hose diameter: 6.5mm Noise: 77dBA Vibration:
On request226,52 € with VAT -
Digital spirit level with aluminum touch surfaces, KMITEX
Absolute and relative measurements, 4 workspaces. Display flips depending on device position. Measuring frame made of aluminum Resolution 0.1 ° Accuracy 0.1 ° for 0-90 ° and up to 0.2 ° for> 90 °. Calibration is done by pressing the ON / OFF button while the power is turned off. Then turn it back on again, the value "1" will melt. Press the ZERO button, wait for 6 seconds. then turn the inclinometer 180 ° and press ZERO again and wait for 6 seconds. You have an absolute zero set and the calibrator is calibrated.
On request73,37 € with VAT -
Digital magnetic spirit level IP65, KMITEX
Digital magnetic spirit level with IP65 protection Absolute and relative measurement, 4 work surfaces The display flips according to the position of the device. Resolution 0.1 ° Accuracy 0.1 ° for 0-90 ° and up to 0.2 ° for> 90 °. Calibration is performed by pressing the ON / OFF button while turning it on until the instrument turns off. Then switch it on again, the value "1" lights up. Press the ZERO button, wait 6sec. then turn the inclinometer 180 ° and press ZERO again and wait 6 seconds. You have set absolute zero here and the inclinometer is calibrated.
On request82,95 € with VAT -
Digital protractor with magnetic base 0-360°, KMITEX
Pocket digital spirit level 65x50mm with upper libel and magnetic base Leveling digital protractor for fast angle viewing Magnetic base, shutdown when inactivity 5 min, reset button Absolute Zero Absolute Zero Measures Precision 0.1 ° Protractor Dimensions: Length: 51mm Width: 32mm Height: 62mm
In stock63,60 € with VAT -
Digital protractor with 305mm spirit level, Extol Premium
Professional digital protractor 0-225 ° with two spirit levels Length: 305mm LCD display Division: 0.1 ° C Possibility of locking in selected position ZERO function for resetting the protractor and measuring the relative difference of angles Automatic switch-off on inactivity Accuracy : 0.5mm / 1m; 0,03Â ° Power supply for 3V batteries CR 2032
In stock33,71 € with VAT