Clamping tools and fixtures

Professional pneumatic milling machine / drill / drill for spot welds, suitable for example. for drilling spot welds and other milling work - high power, lower air consumption and noise Speed: 1400 rpm Drill / cutter for: 8mm Air consumption: 0.4 m3 / min Maximum pressure: 6.2 bar Total length: 310mm Inlet fitting: 1/4 " Min. Air hose diameter: 6.5mm Noise: 77dBA Vibration:

Replacement drill for spot weld drill GP-921C Diameter: 8mm

Absolute and relative measurements, 4 workspaces. Display flips depending on device position. Measuring frame made of aluminum Resolution 0.1 ° Accuracy 0.1 ° for 0-90 ° and up to 0.2 ° for> 90 °. Calibration is done by pressing the ON / OFF button while the power is turned off. Then turn it back on again, the value "1" will melt. Press the ZERO button, wait for 6 seconds. then turn the inclinometer 180 ° and press ZERO again and wait for 6 seconds. You have an absolute zero set and the calibrator is calibrated.

Digital magnetic spirit level with IP65 protection Absolute and relative measurement, 4 work surfaces The display flips according to the position of the device. Resolution 0.1 ° Accuracy 0.1 ° for 0-90 ° and up to 0.2 ° for> 90 °. Calibration is performed by pressing the ON / OFF button while turning it on until the instrument turns off. Then switch it on again, the value "1" lights up. Press the ZERO button, wait 6sec. then turn the inclinometer 180 ° and press ZERO again and wait 6 seconds. You have set absolute zero here and the inclinometer is calibrated.

Digitometer with Magnet / Magnets 0-360 ° Always displayed 0-90 ° angle Dimensions of base: 50x50mm

Pocket digital spirit level 65x50mm with upper libel and magnetic base Leveling digital protractor for fast angle viewing Magnetic base, shutdown when inactivity 5 min, reset button Absolute Zero Absolute Zero Measures Precision 0.1 ° Protractor Dimensions: Length: 51mm Width: 32mm Height: 62mm

Quick-adjustable adjustable pliers, with adjustable jaw Length 230mm Adjustable in 4 levels even fine adjustment by screw

Quick Pliers Length 220mm

Professional digital protractor 0-225 ° with two spirit levels Length: 305mm LCD display Division: 0.1 ° C Possibility of locking in selected position ZERO function for resetting the protractor and measuring the relative difference of angles Automatic switch-off on inactivity Accuracy : 0.5mm / 1m; 0,03Â ° Power supply for 3V batteries CR 2032

Digital Protractor 0-360 ° Length 200mm Possibility to Lock in Selected Position Material: Stainless Steel Splitting: 1 div. = 0.1 ° LCD Display 3V Power Supply CR 2032 battery

Max. pliers opening: 80mm Maximum clamping from edge of material: 0-70mm With jaws jammed, 70mm inner diameter - information for clamping profile beams Overall length: 270mm

Max. pliers opening: 100 mm Maximum clamping from material edge: mm Clamped jaws inside diameter mm - Information for clamping profile beams Overall length: 460mm