Obrážecí hlavy a nástavce

Extended engraving attachment - square punch - 4-edge Size: 17 - square 17mm Dimension tolerance and engraving depth - see attached PDF catalog sheet. For imaging heads: BR-G16L Clamp shank: 16mm Material: HSSE-PM - sintered powder high-speed cobalt steel Coating: without coating - we are able to offer TiN / TiAlN / INOX PLUS , ZIRINOS , possibly other coatings Usage - see the attached video Uncoated version of the extension: steel, aluminum, copper, brass, cast iron - with max. strength up to 900MPa Coated version of the extension: steel, stainless steel, titanium, aluminum, copper, brass, cast iron - with max. strength up to 1400MPa We recommend punches made of sintered steel HSSE-PM for serial production and when forming steels with a higher strength than stainless steel. The attachments with the head work on the principle of turning/extruding - see the attached video. Remember that the hole must always be properly pre-drilled and countersunk - lead-in for the punch! If you need a different punch size or tolerance, or if you did not find the required punch in the menu, send us an inquiry. Delivery time for non-stock items (heads and attachments) is 5-7 days, for custom production usually 2 weeks.

Extended engraving attachment - square punch - 4-edge Size: 18 - square 18mm Dimension tolerance and engraving depth - see attached PDF catalog sheet. For imaging heads: BR-G16L Clamp shank: 16mm Material: HSSE-PM - sintered powder high-speed cobalt steel Coating: without coating - we are able to offer TiN / TiAlN / INOX PLUS , ZIRINOS , possibly other coatings Usage - see the attached video Uncoated version of the extension: steel, aluminum, copper, brass, cast iron - with max. strength up to 900MPa Coated version of the extension: steel, stainless steel, titanium, aluminum, copper, brass, cast iron - with max. strength up to 1400MPa We recommend punches made of sintered steel HSSE-PM for serial production and when forming steels with a higher strength than stainless steel. The attachments with the head work on the principle of turning/extruding - see the attached video. Remember that the hole must always be properly pre-drilled and countersunk - lead-in for the punch! If you need a different punch size or tolerance, or if you did not find the required punch in the menu, send us an inquiry. Delivery time for non-stock items (heads and attachments) is 5-7 days, for custom production usually 2 weeks.

Extended engraving attachment - square punch - 4-edge Dimension: 19 - square 19mm Dimension tolerance and engraving depth - see attached PDF catalog sheet. For imaging heads: BR-G16L Clamp shank: 16mm Material: HSSE-PM - sintered powder high-speed cobalt steel Coating: without coating - we are able to offer TiN / TiAlN / INOX PLUS , ZIRINOS , possibly other coatings Usage - see the attached video Uncoated version of the extension: steel, aluminum, copper, brass, cast iron - with max. strength up to 900MPa Coated version of the extension: steel, stainless steel, titanium, aluminum, copper, brass, cast iron - with max. strength up to 1400MPa We recommend punches made of sintered steel HSSE-PM for serial production and when forming steels with a higher strength than stainless steel. The attachments with the head work on the principle of turning/extruding - see the attached video. Remember that the hole must always be properly pre-drilled and countersunk - lead-in for the punch! If you need a different punch size or tolerance, or if you did not find the required punch in the menu, send us an inquiry. Delivery time for non-stock items (heads and attachments) is 5-7 days, for custom production usually 2 weeks.

Extended engraving attachment - square punch - 4-edge Dimension: 20 - square 20mm Dimension tolerance and engraving depth - see attached PDF catalog sheet. For imaging heads: BR-G16L Clamp shank: 16mm Material: HSSE-PM - sintered powder high-speed cobalt steel Coating: without coating - we are able to offer TiN / TiAlN / INOX PLUS , ZIRINOS , possibly other coatings Usage - see the attached video Uncoated version of the extension: steel, aluminum, copper, brass, cast iron - with max. strength up to 900MPa Coated version of the extension: steel, stainless steel, titanium, aluminum, copper, brass, cast iron - with max. strength up to 1400MPa We recommend punches made of sintered steel HSSE-PM for serial production and when forming steels with a higher strength than stainless steel. The attachments with the head work on the principle of turning/extruding - see the attached video. Remember that the hole must always be properly pre-drilled and countersunk - lead-in for the punch! If you need a different punch size or tolerance, or if you did not find the required punch in the menu, send us an inquiry. Delivery time for non-stock items (heads and attachments) is 5-7 days, for custom production usually 2 weeks.

Extended engraving attachment - square punch - 4-edge Dimension: 21 - square 21mm Dimension tolerance and engraving depth - see attached PDF catalog sheet. For imaging heads: BR-G16L Clamp shank: 16mm Material: HSSE-PM - sintered powder high-speed cobalt steel Coating: without coating - we are able to offer TiN / TiAlN / INOX PLUS , ZIRINOS , possibly other coatings Usage - see the attached video Uncoated version of the extension: steel, aluminum, copper, brass, cast iron - with max. strength up to 900MPa Coated version of the extension: steel, stainless steel, titanium, aluminum, copper, brass, cast iron - with max. strength up to 1400MPa We recommend punches made of sintered steel HSSE-PM for serial production and when forming steels with a higher strength than stainless steel. The attachments with the head work on the principle of turning/extruding - see the attached video. Remember that the hole must always be properly pre-drilled and countersunk - lead-in for the punch! If you need a different punch size or tolerance, or if you did not find the required punch in the menu, send us an inquiry. Delivery time for non-stock items (heads and attachments) is 5-7 days, for custom production usually 2 weeks.

Extended engraving attachment - square punch - 4-edge Size: 22 - square 22mm Dimension tolerance and engraving depth - see attached PDF catalog sheet. For imaging heads: BR-G16L Clamp shank: 16mm Material: HSSE-PM - sintered powder high-speed cobalt steel Coating: without coating - we are able to offer TiN / TiAlN / INOX PLUS , ZIRINOS , possibly other coatings Use - see attached video Uncoated version of the extension: steel, aluminum, copper, brass, cast iron - with max. strength up to 900MPa Coated version of the extension: steel, stainless steel, titanium, aluminum, copper, brass, cast iron - with max. strength up to 1400MPa We recommend punches made of sintered steel HSSE-PM for serial production and when forming steels with a higher strength than stainless steel. The attachments with the head work on the principle of turning/extruding - see the attached video. Remember that the hole must always be properly pre-drilled and countersunk - lead-in for the punch! If you need a different punch size or tolerance, or if you did not find the required punch in the menu, send us an inquiry. Delivery time for non-stock items (heads and attachments) is 5-7 days, for custom production usually 2 weeks.

Extended engraving attachment - square punch - 4-edge Dimension: 23 - square 23mm Dimension tolerance and engraving depth - see attached PDF catalog sheet. For imaging heads: BR-G16L Clamp shank: 16mm Material: HSSE-PM - sintered powder high-speed cobalt steel Coating: without coating - we are able to offer TiN / TiAlN / INOX PLUS , ZIRINOS , possibly other coatings Usage - see the attached video Uncoated version of the extension: steel, aluminum, copper, brass, cast iron - with max. strength up to 900MPa Coated version of the extension: steel, stainless steel, titanium, aluminum, copper, brass, cast iron - with max. strength up to 1400MPa We recommend punches made of sintered steel HSSE-PM for serial production and when forming steels with a higher strength than stainless steel. The attachments with the head work on the principle of turning/extruding - see the attached video. Remember that the hole must always be properly pre-drilled and countersunk - lead-in for the punch! If you need a different punch size or tolerance, or if you did not find the required punch in the menu, send us an inquiry. Delivery time for non-stock items (heads and attachments) is 5-7 days, for custom production usually 2 weeks.

Extended engraving attachment - square punch - 4-edge Size: 24 - square 24mm Dimension tolerance and engraving depth - see attached PDF catalog sheet. For imaging heads: BR-G16L Clamp shank: 16mm Material: HSSE-PM - sintered powder high-speed cobalt steel Coating: without coating - we are able to offer TiN / TiAlN / INOX PLUS , ZIRINOS , possibly other coatings Use - see attached video Uncoated version of the extension: steel, aluminum, copper, brass, cast iron - with max. strength up to 900MPa Coated version of the extension: steel, stainless steel, titanium, aluminum, copper, brass, cast iron - with max. strength up to 1400MPa We recommend punches made of sintered steel HSSE-PM for serial production and when forming steels with a higher strength than stainless steel. The attachments with the head work on the principle of turning/extruding - see the attached video. Remember that the hole must always be properly pre-drilled and countersunk - lead-in for the punch! If you need a different punch size or tolerance, or if you did not find the required punch in the menu, send us an inquiry. Delivery time for non-stock items (heads and attachments) is 5-7 days, for custom production usually 2 weeks.

Extended engraving attachment - square punch - 4-edge Size: 25 - square 25mm Dimension tolerance and engraving depth - see attached PDF catalog sheet. For imaging heads: BR-G16L Clamp shank: 16mm Material: HSSE-PM - sintered powder high-speed cobalt steel Coating: without coating - we are able to offer TiN / TiAlN / INOX PLUS , ZIRINOS , possibly other coatings Usage - see the attached video Uncoated version of the extension: steel, aluminum, copper, brass, cast iron - with max. strength up to 900MPa Coated version of the extension: steel, stainless steel, titanium, aluminum, copper, brass, cast iron - with max. strength up to 1400MPa We recommend punches made of sintered steel HSSE-PM for serial production and when forming steels with a higher strength than stainless steel. The attachments with the head work on the principle of turning/extruding - see the attached video. Remember that the hole must always be properly pre-drilled and countersunk - lead-in for the punch! If you need a different punch size or tolerance, or if you did not find the required punch in the menu, send us an inquiry. Delivery time for non-stock items (heads and attachments) is 5-7 days, for custom production usually 2 weeks.

Extended engraving attachment - square punch - 4-edge Dimension: 5 - square 5mm Dimension tolerance and engraving depth - see attached PDF catalog sheet. For imaging heads: BR-G16M Clamp shank: 16mm Material: HSS - high-speed steel Coating: no coating - we are able to offer TiN / TiAlN / INOX PLUS , ZIRINOS , possibly other coatings Use - see the attached video Uncoated version of the extension: steel, aluminum, copper, brass, cast iron - with max. strength up to 900MPa Coated version of the attachment: steel, stainless steel, titanium, aluminum, copper, brass, cast iron - with max. strength up to 1400MPa In serial production and when forming steels with a higher strength than stainless steel, we recommend HSSE-PM sintered steel punches. The attachments with the head work on the principle of turning/extruding - see the attached video. Remember that the hole must always be properly pre-drilled and countersunk - lead-in for the punch! If you need a different punch size or tolerance, or if you did not find the required punch in the menu, send us an inquiry. Delivery time for non-stock items (heads and attachments) is 5-7 days, for custom production usually 2 weeks.

Extended engraving attachment - square punch - 4-edge Dimension: 5.5 - square 5.5mm Dimension tolerance and engraving depth - see attached PDF catalog sheet. For imaging heads: BR-G16M Clamp shank: 16mm Material: HSS - high-speed steel Coating: no coating - we are able to offer TiN / TiAlN / INOX PLUS , ZIRINOS , possibly other coatings Use - see the attached video Uncoated version of the extension: steel, aluminum, copper, brass, cast iron - with max. strength up to 900MPa Coated version of the attachment: steel, stainless steel, titanium, aluminum, copper, brass, cast iron - with max. strength up to 1400MPa In serial production and when forming steels with a higher strength than stainless steel, we recommend HSSE-PM sintered steel punches. The attachments with the head work on the principle of turning/extruding - see the attached video. Remember that the hole must always be properly pre-drilled and countersunk - lead-in for the punch! If you need a different punch size or tolerance, or if you did not find the required punch in the menu, send us an inquiry. Delivery time for non-stock items (heads and attachments) is 5-7 days, for custom production usually 2 weeks.

Extended engraving attachment - square punch - 4-edge Dimension: 6 - square 6mm Dimension tolerance and engraving depth - see attached PDF catalog sheet. For imaging heads: BR-G16M Clamp shank: 16mm Material: HSS - high-speed steel Coating: no coating - we are able to offer TiN / TiAlN / INOX PLUS , ZIRINOS , possibly other coatings Use - see the attached video Uncoated version of the extension: steel, aluminum, copper, brass, cast iron - with max. strength up to 900MPa Coated version of the attachment: steel, stainless steel, titanium, aluminum, copper, brass, cast iron - with max. strength up to 1400MPa In serial production and when forming steels with a higher strength than stainless steel, we recommend HSSE-PM sintered steel punches. The attachments with the head work on the principle of turning/extruding - see the attached video. Remember that the hole must always be properly pre-drilled and countersunk - lead-in for the punch! If you need a different punch size or tolerance, or if you did not find the required punch in the menu, send us an inquiry. Delivery time for non-stock items (heads and attachments) is 5-7 days, for custom production usually 2 weeks.