Auto - moto

Thread 14x1,25mm - common candle. - Advance Adjustment: 1. Unscrew the spark plug and screw in the timer. 2. Slowly rotate the crankshaft until the piston is in the upper dead center - at this point, the stick of the meter is fully extended. 3. Secure the rod in this position with the side screw - turn the crankshaft about 1/3 turn back (counterclockwise). 4. Set the lead on the advance meter. This is done by screwing the top of the meter. 1 revolution is 1mm, the finer values ??are indicated on the body of the meter. Gently rotate the crankcase in the direction of the engine until the piston reaches the meter bar. 5.Set the breaker (the circuit breaker board) to the position where the contacts are disconnected. 6. The start of the disconnection is determined by the connected bulb, ohmmeter or thin paper. The gauge is suitable for adjusting the range of motorcycles

Thread 14x1,25mm - common candle. Body length without thread: 60mm Included are two bars with a diameter of 5mm and lengths: 50 and 60mm. After assembly of the sticks into the adapter there is a stick overlap of 32mm and 42mm (including thread length) This adapter is fitted with an 8mm stem (8H7 hole)

Piston pump - for suction and filling of oil Drawbar pump, pumping Content: 500ml / 500cm3 * Packaging is without hoses Do not use on: petrol, thinner and brake fluid

Grease sprayer metal, galvanized, suitable for suction and filling oil, without hose / attachment, it must be purchased separately Content: 500ml / 500cm3 Thread: G 1/8 "(M10x1) Dimensions: diameter 57mm x length 335mm Standard: ÄOSN 231430 Used to extract old used oils from various machines and equipment. , Thinner and brake fluid

Hose length: 300mm Thread: G 1/8 "(M10x1) Hose tip: inner diameter 4 , 5mm outer diameter 6mm / 9mm Suitable for use with lubrication press M03695 Do not use on: Petrol, thinner and brake fluid

Hose length: 500mm Thread: G 1/8 "(M10x1) Hose tip: inner diameter 4 , 5mm outer diameter 6mm / 9mm Suitable for use with lubrication press M03695 Do not use on: Petrol, thinner and brake fluid

Plastic funnel, two-piece funnel with strainer Diameter: 135mm Hose length: 250mm Overall length: 370mm

Revolving body pliers Punching and flapping Punching machine with diameter 5mm

Forged arm suitable for VT_ST080x100, VT_ST100x120 and P19783 Thickness of pack: 4mm Shoulder width: 26,5mm Shoulder length: 60mm (without clamping part) Overall length : 90mm

Three-armed MINI puller with 60mm packs (adjustable) and black center screw with thread M10 Size 60x40mm (60mm span, 40mm depth) Jaws are one-sided.

Three-armed MINI puller with 65mm packs (adjustable) and black center screw with thread M10 Size 65x65mm (65mm span, 65mm depth) Jaws are one-sided.

Three-armed MINI puller with 80mm packs (adjustable) and black center screw with thread M10 Size 80x80mm (80mm span, 80mm depth) Jaws are one-sided.