Homepage Auto - moto Measuring aids Preparation for advance measurement - Czech production

Preparation for advance measurement - Czech production

Current price:
17,21 € with VAT
14,22 € without VAT
In stock (41x)

Interested in this product?

Can't find any information? Or not sure about the choice? Ask Us

EAN:
1000000111187
Warranty:
24 months
Code:
LC-PNMPS

Product information

Thread 14x1,25mm - common candle.
-

Advance Adjustment:
1. Unscrew the spark plug and screw in the timer.
2. Slowly rotate the crankshaft until the piston is in the upper dead center - at this point, the stick of the meter is fully extended.
3. Secure the rod in this position with the side screw - turn the crankshaft about 1/3 turn back (counterclockwise).
4. Set the lead on the advance meter. This is done by screwing the top of the meter. 1 revolution is 1mm, the finer values ??are indicated on the body of the meter. Gently rotate the crankcase in the direction of the engine until the piston reaches the meter bar.
5.Set the breaker (the circuit breaker board) to the position where the contacts are disconnected.
6. The start of the disconnection is determined by the connected bulb, ohmmeter or thin paper.
The gauge is suitable for adjusting the range of motorcycles

How do customers see us?

Certified customer, 24.March 2024
"Jako již mnohokráte , mohu jenom pochválit a doporučit. Vše mi dorazilo v naprostém pořádku a přesně podle objednávky."
Certified customer, 24.March 2024
"Vse naprosto ok, vcetne poradenstvi"

Free shipping

There is possibility of free shipping. For more information click here.

Fast shipping

If on stock, you will recieve your order in 1 working day.

Store

Most of the goods are available at the shop.

Individual discounts

Are you a loyal customer or do you want to become one? Contact us!