American inch threads
-
Machine tap UNF - HSSE TiN 2B spiral (40°) 800X , FANAR
Machine tap UNF spiral 800X Type of thread: UNF (UNified thread Fine) - American inch unified thread fine Fitting: 2B Material: HSSE (High speed steel + 5%Cobalt) Coating: TiN - Titanium Nitride Grounded thread profile Standard: DIN 371, DIN376 Usage: Steel Food grade stainless steel Cast iron Non-ferrous metals
from 17,19 € with VAT -
Machine tap UNF - HSSE-PM HL MasterTap 2BX spiral (45°), FANAR
Machine UNF spiral tap (high speed) R45 PM in helix Standard: DIN 371 Thread lead: C, 2 turns - see attached photo Material: HSSE-PM (High speed steel + 5% Cobalt, sintering) Ground thread profile Coating: HL - Balinit HardLube with carbide component (TiAlN + WC / C) with hardness 2600 HV Helix angle: 45 ° Usage: Universal - for steels, stainless steels, cast iron, non-ferrous metals and heat-resistant steels, can also be used for emergency threading of hardened steel. Suitable for machining centers, or even for older types of numerical and conventional machines with lower power.
from 25,71 € with VAT -
Machine tap UNC - HSSE PM-FAN TiAlSiN 2B spiral (40 °), FANAR
Recommended ✓Machine spiral tap (high speed) R40 PM TC 1200 in FAN helix Thread type: UNC (UNified thread Coarse) - American inch unified coarse thread Matching: 2B Material: HSSE-PM (High speed steel + 5% Cobalt, sintering production) Coating: TiAlSiN Top thread angle: 60 ° Helix angle: 40 ° Thread lead: C, 2 turns - see attached photo Ground thread profile Standard: DIN 371, DIN376 Usage: 1.4: Alloy steels, cold drawn tool steel up to 1000N / mm2 1.5: Hardened and hardened steels up to 38 HRC up to 1200N / mm2 2.1: Ferritic and martensitic stainless steel up to 1000N / mm2 2.3: Heat-resistant stainless steel up to 1100N / mm2 3.3: Ball and malleable cast iron up to 700N / mm2 3.4: Ball and malleable cast iron up to 1000N / mm2 1.3: Structural and carbon steel, low-alloy steel, steel castings up to 1100N / mm2 6.4: Bronze and aluminum up to 1200N / mm2 7.4: Aluminum alloys with silicon content Si> 10%, up to 400N / mm2 8.2: Thermosets and hardened plastics
from 31,46 € with VAT -
Machine tap UNF - HSSE PM-FAN TiAlSiN 2B spiral (40 °), FANAR
Recommended ✓Machine spiral tap (high speed) R40 PM TC 1200 in FAN helix Thread type: UNF (UNified thread Fine) - American inch unified fine thread Matching: 2B Material: HSSE-PM (High speed steel + 5% Cobalt, sintering production) Coating: TiAlSiN Top thread angle: 60 ° Helix angle: 40 ° Thread lead: C, 2 turns - see attached photo Ground thread profile Standard: DIN 371, DIN374 Usage: 1.4: Alloy steels, cold drawn tool steel up to 1000N / mm2 1.5: Hardened and hardened steels up to 38 HRC up to 1200N / mm2 2.1: Ferritic and martensitic stainless steel up to 1000N / mm2 2.3: Heat-resistant stainless steel up to 1100N / mm2 3.3: Ball and malleable cast iron up to 700N / mm2 3.4: Ball and malleable cast iron up to 1000N / mm2 1.3: Structural and carbon steel, low-alloy steel, steel castings up to 1100N / mm2 6.4: Bronze and aluminum up to 1200N / mm2 7.4: Aluminum alloys with silicon content Si> 10%, up to 400N / mm2 8.2: Thermosets and hardened plastics
Price - On request -
Machine tap UN - HSSE ISO529 2B with chip breaker, VOLKEL
Machine tap, straight groove with chip breaker, for American unified thread Thread type: UN - American unified thread (UNified thread) Here you will find special types of climbs - outside the regular range Size: according to the chosen variant Top thread angle: 60 ° Form: B Material: HSSE - High speed Steel + 5% cobalt Co5 Standard: ISO529 Usage: Well machinable materials up to 900 N / mm2 Non-alloy and low-alloy steels For through holes
from 13,78 € with VAT -
Machine tap UNS - HSSE ISO529 2B with chip breaker, VOLKEL
Machine tap, straight groove with chip breaker, for American unified thread Thread type: UNS - American unified thread Special (UNified thread Special) Here you will find special types of climbs - outside the regular range Size: according to the chosen variant Form: B Material: HSSE - High speed Steel + 5% cobalt Co5 Standard: ISO529 Usage: Well machinable materials up to 900 N / mm2 Non-alloy and low-alloy steels For through holes
from 10,91 € with VAT -
Machine tap UNS 1/2 - 24 HSS LH left, CZTOOL
Machine Tap, Straight Slot on US Unified inch Thread Size: UNS 1/2 "x 24 LH Angle: 24 Paths per inch Form: B Material: HSS - Rapid Cut Steel Usage: Well-machined materials up to 600 N / mm2 Unalloyed and low alloy steels For through holes
On request114,72 € with VAT -
Machine tap UN 1-5/16 - 12 2B HSSE, CZTOOL
Machine Tap, Straight Groove for American Unified Inch Thread Size: UN 1-5/16" x 12 Pitch: 12 pitches per inch Fit: 2B Form: B Material: HSSE - High Speed ??Steel Usage: Well machinable materials up to 600 N/mm2 Unalloyed and low alloy steels For through holes
On request294,16 € with VAT -
Machine tap UN 13/16 - 16 2B HSS, CZTOOL
Machine Tap, Straight Groove for American Unified Inch Thread Size: UN 13/16" x 16 Pitch: 16 pitches per inch Fit: 2B Form: B Material : HSS - High Speed ??Steel Usage : Well machinable materials up to 600 N/mm2 Non-alloyed and low-alloyed steels For through holes
On request150,03 € with VAT -
Machine tap UN 11/16 - 16 2B HSSE spiral 35°, CZTOOL
Machine Tap, Spiral Groove for American Unified Inch Thread Size: UN 11/16" x 16 Pitch: 16 Pitches per Inch Fit: 2B Shape: C Angle spiral grooves: 35° Material: HSSE Use: Well machinable materials up to 800 N/mm2 Non-alloyed and low-alloyed steels For through holes
In stock170,61 € with VAT -
Machine tap UN 11/16 - 20 2B HSSE spiral 35°, CZTOOL
Machine Tap, Spiral Groove for American Unified Inch Thread Size: UN 11/16" x 20 Pitch: 20 Pitches per Inch Fit: 2B Shape: C Angle spiral grooves: 35° Material: HSSE Use: Well machinable materials up to 800 N/mm2 Non-alloyed and low-alloyed steels For through holes
On request170,61 € with VAT -
Machine tap UN 11/16 x 20 HSSE 2B DIN374 spiral (40°) , FANAR
Machine spiral tap ( high-speed ) UN 11/16x20, R40 SE 800 Size: UN 11/16 x 20 Pitch: 20 steps per inch Fit: 2B, ground thread profile Standard: DIN 374 C Thread pitch: C, 2 courses - see attached photo Material: HSSE ( High-speed steel 5% Cobalt ) Coating: no coating Helix angle: 40° Usage: Structural and carbon steel, low alloy steel, cast steel up to 800N/mm2 Brass with a long chip Automatic steel, structural and cement steel Spherical and malleable cast iron Unalloyed and low-alloyed copper alloys Aluminum alloys with Si content < 5% Thermoplastics
On request101,53 € with VAT