Tools for repairing threads

Machine tap for thread repair For threads: BSF - British inch thread, fine pitch, 55° apex angle Size of the repaired thread: according to the selected variant Form : D Dimensions according to the attached photos. For threaded inserts After cutting the thread with this tap, it is necessary to insert a stainless spiral insert into the thread. I.e. the repaired thread will only be created after the insertion of the spiral insert. *** The thread cut with this tap does not/need not have a standard dimension = it cannot be replaced with ordinary cutting set / machine taps.

Machine tap for thread repair For threads: BA - British inch thread, used in precision optical and measuring instruments The thread is standardized according to the British standard BS 93:1951 and BS 93:2008 Size of the repaired thread: according to the selected variant Form : D Dimensions according to the attached photos. For threaded inserts After cutting the thread with this tap, it is necessary to insert a stainless spiral insert into the thread. I.e. the repaired thread will only be created after the insertion of the spiral insert. *** The thread cut with this tap does not/need not have a standard dimension = it cannot be replaced with ordinary cutting set / machine taps.

Machine tap for thread repair For threads : BSB - British inch pipe thread, used mainly for brass pipes, apex angle 55° Size of the repaired thread: according to the selected variant Form : D Dimensions according to the attached photos. For threaded inserts After cutting the thread with this tap, it is necessary to insert a stainless spiral insert into the thread. I.e. the repaired thread will only be created after the insertion of the spiral insert. *** The thread cut with this tap does not/need not have a standard dimension = it cannot be replaced with ordinary cutting set / machine taps.

V-Coil M5-M12 thread repair workshop kit - only normal pitch / thread repair Kit includes: Threads: M5x0.8 , M6x1.0 , M8x1.25 , M10x1.5 , M12x1.75 Drills: 5.2mm , 6.3mm , 8.3mm , 10.4mm , 12.4mm Loaders, breakers and threaded inserts in length 1.0D / 1.5D and 2.0D (10pcs from each length) The lengths of the inserts are always a multiple of the diameter of the thread being repaired, i.e. if you are repairing an M6 thread and there are 1.5D inserts in the set, then the length of the insert is 1.5 times 6mm, i.e. 9mm. If you need a shorter or longer insert, we can offer separately in lengths 1.0D / 1.5D / 2.0D / 2.5D / 3.0D. If the length doesn't suit you, you can adjust the length - cut, grind, pinch - as possible, just be careful - the inserts are stainless steel, it won't be easy. Method of thread repair: 1. You drill out the damaged thread with the attached drill ( if it is included in the set) 2. You cut the thread with the attached (special) tapper (using other - set or machine tappers does not work) 3. With the help of the enclosed inserter, you introduce the insert to the desired depth (note, the inserts cannot be turned back!) 4. Use a punch ( if it is included in the set) or use pliers to break out the insertion part on the insert

V-Coil M5-M12 Thread Repair Workshop Set - Only Common Creep. / Thread Repair Kit contains: Taps: M5x0,8, M6x1,0, M8x1,25, M10x1,5, M12x1,75 Drills: 5,2mm, 6 , 3mm, 8,3mm, 10,4mm, 12,4mm Inserts lengths are always a multiple of the diameter of the thread to be repaired, ie if you repair the M6 ??thread and the set is 1,5D, then the length of the insert is 1.5 times 6mm, ie 9mm. If you need a shorter or longer insert, we can offer it separately in lengths of 1.0D / 1.5D / 2.0D / 2.5D / 3.0D. If the length does not suit you, you can adjust the length - cut, wipe, chip - if possible, be careful - the inserts are stainless, it will not be easy. Thread Repair Method: 1. Boring the damaged thread with the drill bit (if fitted) 2. Cut out the thread with a special tap (use of other - notch or machine taps does not work) 3. Using the supplied boot loader, insert the insert into the required depth (be careful, the inserts can not be retightened!) 4. If you put the cutter (if it is included in the set) or the pincers, break the insertion part on the insert

V-Coil Thread Repair Kit M6-M14x1,25 / Thread Repair Kit contains: Taps: M6x1,0, M8x1,25, M10x1,5, M12x1,75, 14x1 , 25 Drills: 6,3mm, 8,3mm, 10,4mm, 12,4mm Inserts length are always a multiple of the diameter of the thread to be repaired, ie if you are repairing the M6 ??thread and the set is 1.5D, then the length of the insert is 1.5 times 6mm, ie 9mm. If you need a shorter or longer insert, we can offer it separately in lengths of 1.0D / 1.5D / 2.0D / 2.5D / 3.0D. If the length does not suit you, you can adjust the length - cut, wipe, chip - if possible, be careful - the inserts are stainless, it will not be easy. Thread Repair Method: 1. Boring the damaged thread with the drill bit (if fitted) 2. Cut out the thread with a special tap (use of other - notch or machine taps does not work) 3. Using the supplied boot loader, insert the insert into the required depth (be careful, the inserts can not be retightened!) 4. (If included in the set) or pliers break the insertion part on the insert Photo is for illustrative purposes only

V-Coil Thread Repair Kit M6-M14x1,25 / Thread Repair Kit contains: Taps: M6x1,0, M8x1,25, M10x1,5, M12x1,75, special - stepped 14x1,25 Drills: 6,3mm, 8,3mm, 10,4mm, 12,4mm Loaders, Breakers and Threaded Insert Liner Lengths < / b> is always a multiple of the diameter of the thread to be repaired, ie if you are repairing the M6 ??thread and the set is 1.5D, then the length of the insert is 1.5 times 6mm, ie 9mm. If you need a shorter or longer insert, we can offer it separately in lengths of 1.0D / 1.5D / 2.0D / 2.5D / 3.0D. If the length does not suit you, you can adjust the length - cut, wipe, chip - if possible, be careful - the inserts are stainless, it will not be easy. Thread Repair Method: 1. Boring the damaged thread with the drill bit (if fitted) 2. Cut out the thread with a special tap (use of other - notch or machine taps does not work) 3. Using the supplied boot loader, insert the insert into the required depth (be careful, the inserts can not be retightened!) 4. If you put the cutter (if it is included in the set) or the pincers, break the insertion part on the insert

Taps : M6x1,0, M8x1,25, M10x1,5 Drills: 6,3mm, 8,3mm, 10,4mm Insert lengths are always a multiple of the diameter of the thread to be repaired, ie if you are repairing the M6 ??thread and the set is 1.5D, then the length of the insert is 1.5 times 6mm, ie 9mm. If you need a shorter or longer insert, we can offer it separately in lengths of 1.0D / 1.5D / 2.0D / 2.5D / 3.0D. If the length does not suit you, you can adjust the length - cut, wipe, chip - if possible, be careful - the inserts are stainless, it will not be easy. Thread Repair Method: 1. Boring the damaged thread with the drill bit (if fitted) 2. Cut out the thread with a special tap (use of other - notch or machine taps does not work) 3. Using the supplied boot loader, insert the insert into the required depth (be careful, the inserts can not be retightened!) 4. If you put the cutter (if it is included in the set) or the pincers, break the insertion part on the insert

V-Coil Thread Repair Kit M14x1,25 mm / Thread Repair Gradient: 1,25 - Fine Gradient Set includes: special stepped tap, loader and 15x threaded insert. Inserts are included in the set in total of 3 lengths, each length of 5 pieces. Insert lengths are always a multiple of the diameter of the thread to be repaired, ie if you are repairing the M6 ??thread and the set is 1.5D, then the length of the insert is 1.5 times 6mm, 9mm. If you need a shorter or longer insert, we can offer it separately in lengths of 1.0D / 1.5D / 2.0D / 2.5D / 3.0D. If the length does not suit you, you can adjust the length - cut, wipe, chip - if possible, be careful - the inserts are stainless, it will not be easy. Thread Repair Method: 1. Cut out the thread with a special tap (use of other - notch or machine taps does not work) 3. Using the supplied boot loader, insert the insert to the required depth (be careful, the inserts can not be retightened!) 3. If you put the cutter (if it is included in the set) or the pincers, break the insertion part on the insert

UNC 1/4 "- 1/2" Thread Repair Kit - Fine Whitworth - Fine UNC: 1 / 4x20, 5 / 16x18, 3 / 8x16 , 7 / 16x14, 1 / 2x13 Drills: 6,7mm, 8,3mm, 9,9mm, 11,6mm, 13mm Inserts lengths are always a multiple of the diameter of the thread to be repaired, ie, for example, if you are repairing the M6 ??thread and the set is 1.5D, then the length of the insert is 1.5 times 6mm, ie 9mm. If you need a shorter or longer insert, we can offer it separately in lengths of 1.0D / 1.5D / 2.0D / 2.5D / 3.0D. If the length does not suit you, you can adjust the length - cut, wipe, chip - if possible, be careful - the inserts are stainless, it will not be easy. Thread Repair Method: 1. Boring the damaged thread with the drill bit (if fitted) 2. Cut out the thread with a special tap (use of other - notch or machine taps does not work) 3. Using the supplied boot loader, insert the insert into the required depth (be careful, the inserts can not be retightened!) 4. (If included in the set) or pliers break the insertion part on the insert Photo is for illustrative purposes only

Workshop Kit for V-Coil Thread Repair UNF 1/4 "- 1/2" - Fine Whitworth - Fine Gradient UNF: 1 / 4x28, 5 / 16x24, 3 / 8x24 , 7 / 16x20, 1 / 2x20 Drills: 6,7mm, 8,3mm, 9,8mm, 11,5mm, 13mm < Inserts lengths are always a multiple of the diameter of the thread to be repaired, ie if you are repairing the M6 ??thread and the set is 1.5D, then the length of the insert is 1.5 times 6mm, 9mm. If you need a shorter or longer insert, we can offer it separately in lengths of 1.0D / 1.5D / 2.0D / 2.5D / 3.0D. If the length does not suit you, you can adjust the length - cut, wipe, chip - if possible, be careful - the inserts are stainless, it will not be easy. Thread Repair Method: 1. Boring the damaged thread with the drill bit (if fitted) 2. Cut out the thread with a special tap (use of other - notch or machine taps does not work) 3. Using the supplied boot loader, insert the insert into the required depth (be careful, the inserts can not be retightened!) 4. (If included in the set) or pliers break the insertion part on the insert Photo is for illustrative purposes only

Workshop Kit for Repairing Thread V-Coil BSW 1/4 "- 1/2" - Fine Whitworth - Basic Climb Set includes: BSF Taps: 1 / 4x20, 5 / 16x18, 3 / 8x16 , 7 / 16x14, 1 / 2x12 Drills: 6,7mm, 8,3mm, 9,9mm, 11,5mm, 13mm < Inserts lengths are always a multiple of the diameter of the thread to be repaired, ie if you are repairing the M6 ??thread and the set is 1,5D, then the length of the insert is 1.5 times 6mm, ie 9mm. If you need a shorter or longer insert, we can offer it separately in lengths of 1.0D / 1.5D / 2.0D / 2.5D / 3.0D. If the length does not suit you, you can adjust the length - cut, wipe, chip - if possible, be careful - the inserts are stainless, it will not be easy. Thread Repair Method: 1. Boring the damaged thread with the drill bit (if fitted) 2. Cut out the thread with a special tap (use of other - notch or machine taps does not work) 3. Using the supplied boot loader, insert the insert into the required depth (be careful, the inserts can not be retightened!) 4. If you put the cutter (if it is included in the set) or the pincers, break the insertion part on the insert