Taps
-
Metric
-
For oil baths
-
Whitworth (BSW)
-
Whitworth (BSF)
-
UNC
-
UNF
-
Tubular (G / BSP)
-
BA (conical thread)
-
BSB
-
Thread repair tap - metric HSS, V-Coil
Machine tap for thread repair Size of the repaired thread: according to the selected variant Form : D Dimensions according to the attached photos. For threaded inserts according to ISO 2 (6H) The thread cut with this tap has a tolerance of ISO1 (4H) After cutting the thread with this tap, it is necessary to insert a stainless spiral insert into the thread. I.e. the repaired thread will only be created after the insertion of the spiral insert. *** The thread cut with this tap does not/need not have a standard dimension = it cannot be replaced with regular metric cutting set / machine taps.
from 7,68 € with VAT -
Thread repair machine tap - metric HSSE, V-Coil
Machine tap with chip breaker, for thread repair Size of the repaired thread: according to the selected variant Form : B Dimensions according to the attached photos. For threaded inserts according to ISO 2 (6H) The thread cut with this tap has a tolerance of ISO1 (4H) After cutting the thread with this tap, it is necessary to insert a stainless spiral insert into the thread. I.e. the repaired thread will only be created after the insertion of the spiral insert. *** The thread cut with this tap does not/need not have a standard dimension = it cannot be replaced with regular metric cutting set / machine taps.
from 9,10 € with VAT -
Thread repair spiral machine tap - metric HSSE , V-Coil
Machine tap in a spiral, for thread repair Size of the repaired thread: according to the selected variant Form : C Dimensions according to the attached photos. For threaded inserts according to ISO 2 (6H) The thread cut with this tap has a tolerance of ISO1 (4H) After cutting the thread with this tap, it is necessary to insert a stainless spiral insert into the thread. I.e. the repaired thread will only be created after the insertion of the spiral insert. *** The thread cut with this tap does not/need not have a standard dimension = it cannot be replaced with regular metric cutting set / machine taps.
from 8,86 € with VAT -
Tthread repair tap - metric HSS 6-point , V-Coil
Machine tap for thread repair in battery drills Size of the repaired thread: according to the selected variant Form : D Dimensions according to the attached photos. For threaded inserts according to ISO 2 (6H) The thread cut with this tap has a tolerance of ISO1 (4H) After cutting the thread with this tap, it is necessary to insert a stainless spiral insert into the thread. I.e. the repaired thread will only be created after the insertion of the spiral insert. *** The thread cut with this tap does not/need not have a standard dimension = it cannot be replaced with regular metric cutting set / machine taps.
4,73 € with VAT -
Thread repair forming machine tap - metric HSSE , V-Coil
Forming machine tap, for thread repair Size of the repaired thread: according to the selected variant Form : B Dimensions according to the attached photos. For threaded inserts according to ISO 2 (6H) The thread cut with this tap has a tolerance of ISO1 (4H) After creating a thread with this tap, it is necessary to insert a stainless steel spiral insert into the thread. I.e. the repaired thread will only be created after the insertion of the spiral insert. *** The thread cut with this tap does not/need not have a standard dimension = it cannot be replaced with regular metric cutting set / machine taps.
from 17,25 € with VAT -
Thread repair combined tap - metric HSS-G , V-Coil
Disposable tap for thread repair A drill is not needed to repair the thread - the tapper cuts the thread at once. Size of the repaired thread: according to the selected variant Material: HSS - High-speed steel Fitting: ISO1 / 4H Cuts a thread for V-Coil threaded inserts according to ISO 2 ( 6H ) After cutting the thread with this tap, it is necessary to insert a stainless spiral insert into the thread. I.e. the repaired thread will only be created after the insertion of the spiral insert. *** The thread cut with this tap does not/need not have a standard dimension = it cannot be replaced with regular metric cutting set / machine taps.
from 16,42 € with VAT -
Thread repair machine tap G - HSS, V-Coil
Machine tap for thread repair For threads: G or BSP - British inch pipe thread, used in the Czech Republic, basic pitch, apex angle 55° Size of the repaired thread: according to the selected variant Form : D Dimensions according to the attached photos. For threaded inserts After cutting the thread with this tap, it is necessary to insert a stainless spiral insert into the thread. I.e. the repaired thread will only be created after the insertion of the spiral insert. *** The thread cut with this tap does not/need not have a standard dimension = it cannot be replaced with ordinary cutting set / machine taps.
from 14,42 € with VAT -
Thread repair tap set G - HSS, V-Coil
Manual garden tap for thread repair For threads: G or BSP - British inch pipe thread, used in the Czech Republic, basic pitch, apex angle 55° Size of the repaired thread: according to the selected variant Form : C Dimensions according to the attached photos. For threaded inserts After cutting the thread with this tap, it is necessary to insert a stainless spiral insert into the thread. I.e. the repaired thread will only be created after the insertion of the spiral insert. *** The thread cut with this tap does not/need not have a standard dimension = it cannot be replaced with ordinary cutting set / machine taps.
from 28,83 € with VAT -
Thread repair tap UNC - HSS , V-Coil
Machine tap for thread repair For threads: UNC - Unified American inch thread, basic pitch, peak angle is 60° Size of the repaired thread: according to the selected variant Form : D Dimensions according to the attached photos. For threaded inserts After cutting the thread with this tap, it is necessary to insert a stainless spiral insert into the thread. I.e. the repaired thread will only be created after the insertion of the spiral insert. *** The thread cut with this tap does not/need not have a standard dimension = it cannot be replaced with ordinary cutting set / machine taps.
from 7,70 € with VAT -
Thread repair tap UNF - HSS, V-Coil
Machine tap for thread repair For threads: UNF - Unified American inch thread, fine pitch, peak angle is 60° Size of the repaired thread: according to the selected variant Form : D Dimensions according to the attached photos. For threaded inserts After cutting the thread with this tap, it is necessary to insert a stainless spiral insert into the thread. I.e. the repaired thread will only be created after the insertion of the spiral insert. *** The thread cut with this tap does not/need not have a standard dimension = it cannot be replaced with ordinary cutting set / machine taps.
from 7,56 € with VAT -
Thread repair tap BSW - HSS, V-Coil
Machine tap for thread repair For Threads : BSW - British Inch Thread, Basic Pitch, 55° Apex Angle Size of the repaired thread: according to the selected variant Form : D Dimensions according to the attached photos. For threaded inserts After cutting the thread with this tap, it is necessary to insert a stainless spiral insert into the thread. I.e. the repaired thread will only be created after the insertion of the spiral insert. *** The thread cut with this tap does not/need not have a standard dimension = it cannot be replaced with ordinary cutting set / machine taps.
from 7,56 € with VAT -
Thread repair tap BSF - HSS, V-Coil
Machine tap for thread repair For threads: BSF - British inch thread, fine pitch, 55° apex angle Size of the repaired thread: according to the selected variant Form : D Dimensions according to the attached photos. For threaded inserts After cutting the thread with this tap, it is necessary to insert a stainless spiral insert into the thread. I.e. the repaired thread will only be created after the insertion of the spiral insert. *** The thread cut with this tap does not/need not have a standard dimension = it cannot be replaced with ordinary cutting set / machine taps.
from 7,56 € with VAT