Tools for repairing threads

Workshop Kit for V-Coil Thread Repair BSF 1/4 "- 1/2" - Fine Whitworth - Fine Gradient BSF Taps: 1 / 4x26, 5 / 16x22, 3 / 8x20 , 7 / 16x18, 1 / 2x16 Drills: 6,6mm, 8,3mm, 9,9mm, 11,5mm, 13mm < Inserts lengths are always a multiple of the diameter of the thread to be repaired, ie if you are repairing the M6 ??thread and the set is 1,5D, then the length of the insert is 1.5 times 6mm, ie 9mm. If you need a shorter or longer insert, we can offer it separately in lengths of 1.0D / 1.5D / 2.0D / 2.5D / 3.0D. If the length does not suit you, you can adjust the length - cut, wipe, chip - if possible, be careful - the inserts are stainless, it will not be easy. Thread Repair Method: 1. Boring the damaged thread with the drill bit (if fitted) 2. Cut out the thread with a special tap (use of other - notch or machine taps does not work) 3. Using the supplied boot loader, insert the insert into the required depth (be careful, the inserts can not be retightened!) 4. If you put the cutter (if it is included in the set) or the pincers, break the insertion part on the insert

Manual breaker for thread repair inserts For inserts: M10x1,0 and M10x1,25

Stainless Steel Thread Insert Stainless Steel Thread Insert Repair: M 14x1,25 mm Standard Length: 8,4mm DIN 8140 Inlet Thread Tension: ISO 2 (6H) V-Coil threaded inserts are made of high quality chrome nickel stainless steel and form firm, internal threads that are heat and corrosion resistant. Unique design provides excellent threads whose overall performance characteristics can not be imitated in any other way.

Stainless Steel Thread Insert - ISO 2 (6H) V-Coil threaded inserts are made of high quality chrome nickel stainless steel and form solid, internal threads that are heat and corrosion resistant. Unique design provides excellent threads whose overall performance characteristics can not be imitated in any other way.

Stainless Steel Thread Insert Stainless Steel Thread Insert: ISO 2 (6H) V-Coil threaded inserts are made of high quality chrome nickel stainless steel and form solid, internal threads that are heat and corrosion resistant. Unique design provides excellent threads whose overall performance characteristics can not be imitated in any other way.

Hand Loader for Thread Repair Inserts For Inserts: M2 / M2,2 / UNC no.2 The stop for different lengths of inserts can be adjusted - it is secured by an Allen screw.

Manual Inserter for Thread Repair Inserts Inserts: M2,5 The stop for various lengths of liners can be adjusted - it is secured by an Allen screw.

Hand Loader for Thread Repair Inserts For Inserts: M3, UNC no.4, UNC no.5, UNF no.4, BSW 1/8 Stoppers for Different Lengths The inserts can be adjusted - it is secured by an Allen screw.

Manual inserter for thread repair inserts For inserts: M3,5 / UNC no.6, UNF no.6 Stop for rose The length of the inserts can be adjusted - it is secured with an Allen screw.

Manual Inserter for Thread Repair Inserts Inserts: M4, UNC no.8, UNF no.8, BSW 3/16 secure with an allen screw.

Hand Loader for Thread Repair Inserts -

Manual Inserter for Thread Repair Inserts Inserts: M5, UNC no.12, UNC 1/4, UNF no.10, UNF 1/4, BSF 3/16 The stop for different lengths of the inserts can be adjusted - it is secured by an Allen screw.