Oleje a tuky
-
TAP Plus cutting oil for drilling, reaming and threading, 1l
This liquid contains sulfur and chlorine. Before use, test how it reacts with the machined material! Volume: 1 liter - stock, bulk Color: clear, to yellow MOLYSLIP TAP is a series of high-performance lubricants intended for heavy machining operations, such as threading, drilling, reaming, pressing, . They are highly concentrated mixtures of lubricants and reactive substances resistant to extreme pressures. They contain highly effective anti-wear additives. MOLYSLIP TAP products provide excellent quality machined surfaces and protect tools from wear and damage. They are suitable for most drilling, reaming and threading operations on most metals. However, it is recommended to check compatibility before use, as extreme pressure sulfur additives may interact with some metals. In situations where chlorine must be avoided, use TAP without chlorine, where both chlorine and sulfur must be avoided, TAP AQUA is recommended. MOLYSLIP TAP fluid can also be used to enhance the performance of cutting oils applied in machining (pump & nozzle), typical concentrations 5-10% (check compatibility) before adding. Silicone free Viscosity : 85 mm2/s 4-ball welding test : >800kg Excellent resistance to withstand extreme pressures and wear resistance - Maximizes tool life in demanding operations - Contributes to high quality surfaces
In stock47,11 € with VAT -
TAP Plus cutting oil for drilling, reaming and threading, 5l
This liquid contains sulfur and chlorine. Before use, test how it reacts with the machined material! Volume: 5 liters, poured Color: clear, to yellow MOLYSLIP TAP is a series of high-performance lubricants designed for heavy machining operations such as threading, drilling, reaming, pressing, . They are highly concentrated mixtures of lubricants and reactive substances resistant to extreme pressures. They contain highly effective anti-wear additives. MOLYSLIP TAP products provide excellent quality machined surfaces and protect tools from wear and damage. They are suitable for most drilling, reaming and threading operations on most metals. However, it is recommended to check compatibility before use, as extreme pressure sulfur additives may interact with some metals. In situations where chlorine must be avoided, use TAP without chlorine, where both chlorine and sulfur must be avoided, TAP AQUA is recommended. MOLYSLIP TAP fluid can also be used to enhance the performance of cutting oils applied in machining (pump & nozzle), typical concentrations 5-10% (check compatibility) before adding. Silicone free Viscosity : 85 mm2/s 4-ball welding test : >800kg Excellent resistance to withstand extreme pressures and wear resistance - Maximizes tool life in demanding operations - Contributes to high quality surfaces
On request226,71 € with VAT -
Emulsion oil TRIM E950, 0.5 liter
TRIM E950 is highly efficient processing emulsion Extremely powerful and very cleanly working emulsion oil which is designed for the most difficult operations The composition is based on vegetable oils with premium additives Oil is friendly to service for its non-aggressive nature and slight initial odor Provides exceptionally perfect surface finish and very long Lifetime tools for hard machinable alloys aluminum, inconel, titanium, stainless and high strength steels It is suitable for all All materials, with the exception of magnesium, tolerant hard water and is little foaming water This product has approval for example from Rolls Royce, Airbus, Boeing, Bombardier, United Technologies, ... Color: amber(concentrate) Flash point> 100 ° C Dilution: - light processing and grinding: 5-7% - moderate machining: 7-10% - powerful machining: 10-15% - ko instruction range concentration: 5 -15% Emulsions as Trim E950 work better, if they are mixed by adding concentrate coolant liquids DO water(never conversely), to ensure that the best emulsion is formed Packaging: 0.5 liter in plastic Â!DobÄ ›(rozlAf © ruAff 29
In stock8,05 € with VAT -
Emulsion oil TRIM E950, 1 liter
TRIM E950 is highly efficient processing emulsion Extremely powerful and very cleanly working emulsion oil which is designed for the most difficult operations The composition is based on vegetable oils with premium additives Oil is friendly to service for its non-aggressive nature and slight initial odor Provides exceptionally perfect surface finish and very long Lifetime tools for hard machinable alloys aluminum, inconel, titanium, stainless and high strength steels It is suitable for all All materials, with the exception of magnesium, tolerant hard water and is little foaming water This product has approval for example from Rolls Royce, Airbus, Boeing, Bombardier, United Technologies, ... Color: amber(concentrate) Flash point> 100 ° C Dilution: - light processing and grinding: 5-7% - moderate machining: 7-10% - powerful machining: 10-15% - ko instruction range concentration: 5 -15% Emulsions as Trim E950 work better, if they are mixed by adding concentrate coolant liquids DO water(never conversely), to ensure that the best emulsion is formed Packaging: 1 liter in plastic container â € 28(sloved)
In stock14,62 € with VAT -
Emulsion oil TRIM E950, 5 liters
TRIM E950 is highly efficient processing emulsion Extremely powerful and very cleanly working emulsion oil which is designed for the most difficult operations The composition is based on vegetable oils with premium additives Oil is friendly to service for its non-aggressive nature and slight initial odor Provides exceptionally perfect surface finish and very long Lifetime tools for hard machinable alloys aluminum, inconel, titanium, stainless and high strength steels It is suitable for all All materials, with the exception of magnesium, tolerant hard water and is little foaming water This product has approval for example from Rolls Royce, Airbus, Boeing, Bombardier, United Technologies, ... Color: amber(concentrate) Flash point> 100 ° C Dilution: - light processing and grinding: 5-7% - moderate machining: 7-10% - powerful machining: 10-15% - ko instruction range concentration: 5 -15% Emulsions as Trim E950 work better, if they are mixed by adding concentrate cooling liquids DO water(never conversely), to ensure that the best emulsion is formed Packaging: 5 liter in plastic canister(resolved )
In stock64,61 € with VAT -
Emulsion oil TRIM E950, 204l - barrel
TRIM E950 is a high performance machining emulsion Extremely powerful and very clean working emulsion oil that is designed for the most difficult operations The composition is based on vegetable oils with premium additives The oil is friendly to operator for its non-aggressive nature and slight initial odor Gives an exceptionally perfect surface finish and very long tool life on difficult-to-machine aluminum, inconel, titanium, stainless and high strength steels Suitable for all materials except magnesium, tolerant to hard water and is low foaming even in soft water. This product has approval from, for example, Rolls Royce, Airbus, Boeing, Bombardier, United Technologies,... Colour: amber (concentrate) Flash point >100°C Dilution: - light machining and grinding: 5-7% - moderate machining: 7-10% - powerful machining: 10-15% - design concentration range: 5-15% Emulsion like Trim E950's work better when mixed by adding coolant concentrate INTO water (never the other way around) to ensure the best emulsion is formed Package: original 204l barrel
On request2.002,34 € with VAT -
Emulsion oil TRIM E950, 25l canister
TRIM E950 is a high performance machining emulsion Extremely powerful and very clean working emulsion oil that is designed for the most difficult operations The composition is based on vegetable oils with premium additives The oil is friendly to operator for its non-aggressive nature and slight initial odor Gives an exceptionally perfect surface finish and very long tool life on difficult-to-machine aluminum, inconel, titanium, stainless and high strength steels Suitable for all materials except magnesium, tolerant to hard water and is low foaming even in soft water. This product has approval from, for example, Rolls Royce, Airbus, Boeing, Bombardier, United Technologies,... Colour: amber (concentrate) Flash point >100°C Dilution: - light machining and grinding: 5-7% - moderate machining: 7-10% - powerful machining: 10-15% - design concentration range: 5-15% Emulsion like Trim E950's work better when mixed by adding coolant concentrate INTO water (never the other way around) to ensure the best emulsion is formed Package: original 204l barrel
In stock273,18 € with VAT -
Cutting oil CASTROL Variocut B 30, 0.5 liter
Castrol Variocut B 30 Liquid High Performance Stretch Cutting Oil is a mineral chlorine-free cutting oil. Packaging quantity (in liters): 0,5 liter Pack quantity (in kg): 0,445kg (main unit of measurement) - plastic container with cap It is formulated with Castrol technology, which gives the oil extra lubricating properties even under extreme working pressures. Application: Highly alloyed steel materials Designed for machining under very difficult conditions, for stretching, hobbing, gearing, threading etc. Helps create excellent quality of the final surface even behind the vu extreme machining conditions and, in addition, will help to extend tool life. Characteristics: - Does not contain chlorine - Reduced costs of oil disposal - Castrol additive technology - Increase tool life, Increase machining speed, Excellent finish finish, - Good wetting characteristics - Low oil yield, lower costs - High air separation - Reduced foaming and oil aeration - Low odor - Contribute to improving the working environment Technical parameters : Appearance at 25 ° C: Yellowish, Clear Relative Density at 20 ° C: 0.882 Kinematic Viscosity at 40 ° C: 22mm2 / s Flash point according to Pensky-Martense : 169 ° C
In stock7,32 € with VAT -
Cutting oil CASTROL Variocut B 30, 1 liter
Castrol Variocut B 30 Liquid High Performance Stretch Cutting Oil is a mineral chlorine-free cutting oil. Packaging quantity (in liters): 1 liter Packaging quantity (in kg): 0,89 kg (main unit of measurement) - plastic container with closure < It is formulated from Castrol's additive technology, which gives oil extra lubricating properties even under extreme working pressures. Application: Highly alloyed steel materials Designed for machining under very difficult conditions, for stretching, hobbing, gearing, threading etc. Helps create excellent quality of the final surface even behind the vu extreme machining conditions and, in addition, will help to extend tool life. Characteristics: - Does not contain chlorine - Reduced costs of oil disposal - Castrol additive technology - Increase tool life, Increase machining speed, Excellent finish finish, - Good wetting characteristics - Low oil yield, lower costs - High air separation - Reduced foaming and oil aeration - Low odor - Contribute to improving the working environment Technical parameters : Appearance at 25 ° C: Yellowish, Clear Relative Density at 20 ° C: 0.882 Kinematic Viscosity at 40 ° C: 22mm2 / s Flash point according to Pensky-Martense : 169 ° C
In stock13,65 € with VAT -
Cutting oil CASTROL Variocut B 30, 5 liters
Castrol Variocut B 30 Liquid High Performance Stretch Cutting Oil is a mineral chlorine-free cutting oil. Packaging quantity (in liters): 5 liters Packaging quantity (in kg): 4,45 kg (main unit of measurement) - plastic container with closure < It is formulated from Castrol's additive technology, which gives oil extra lubricating properties even under extreme working pressures. Application: Highly alloyed steel materials Designed for machining under very difficult conditions, for stretching, hobbing, gearing, threading etc. Helps create excellent quality of the final surface even behind the vu extreme machining conditions and, in addition, will help to extend tool life. Characteristics: - Does not contain chlorine - Reduced costs of oil disposal - Castrol additive technology - Increase tool life, Increase machining speed, Excellent finish finish, - Good wetting characteristics - Low oil yield, lower costs - High air separation - Reduced foaming and oil aeration - Low odor - Contribute to improving the working environment Technical parameters : Appearance at 25 ° C: Yellowish, Clear Relative Density at 20 ° C: 0.882 Kinematic Viscosity at 40 ° C: 22mm2 / s Flash point according to Pensky-Martense : 169 ° C
In stock57,85 € with VAT -
Cutting oil CASTROL Variocut B 30, 10 liters
Castrol Variocut B 30 Liquid High Performance Stretch Cutting Oil is a mineral chlorine-free cutting oil. Packaging quantity (in liters): 10 liters Packaging quantity (in kg): 8,9kg (main unit of measurement) - plastic container with closure < It is formulated from Castrol's additive technology, which gives oil extra lubricating properties even under extreme working pressures. Application: Highly alloyed steel materials Designed for machining under very difficult conditions, for stretching, hobbing, gearing, threading etc. Helps create excellent quality of the final surface even behind the vu extreme machining conditions and, in addition, will help to extend tool life. Characteristics: - Does not contain chlorine - Reduced costs of oil disposal - Castrol additive technology - Increase tool life, Increase machining speed, Excellent finish finish, - Good wetting characteristics - Low oil yield, lower costs - High air separation - Reduced foaming and oil aeration - Low odor - Contribute to improving the working environment Technical parameters : Appearance at 25 ° C: Yellowish, Clear Relative Density at 20 ° C: 0.882 Kinematic Viscosity at 40 ° C: 22mm2 / s Flash point according to Pensky-Martense : 169 ° C
In stock110,35 € with VAT -
CASTROL Variocut B 30 cutting oil, barrel 208 liters
Liquid high-performance stretching cutting oil, Castrol Variocut B 30 is a mineral chlorine-free cutting oil. Quantity in the package (in liters): 208 liters / original barrel It is formulated from Castrol technology additives, which give the oil exceptional lubricating properties even under extreme working pressures. Usage : Highly alloyed steel materials Assembled for machining under very difficult conditions, for broaching, hobbing gears, turning gears, threading, etc. Helps to create an excellent quality of the final surface even under high pressure conditions. extreme machining conditions and will also contribute to extending tool life. Characteristics : - Does not contain chlorine - reduced oil disposal costs - Castrol additive technology - tool life extension, machining speed increase, top final surface, minimal tool wear - Good wetting characteristics - low oil yield, lower costs - Excellent air separation - Reduction of foaming and aeration of the oil - Mild odor - Contributes to improving the working environment Technical parameters: Appearance at 25°C : Yellow-brown, clear Relative density at 20°C: 0.882 Kinematic viscosity at 40°C: 22mm2/s Flash point according to Pensky-Martens: 169°C
On request2.011,43 € with VAT