Oleje a tuky

Universal soluble oil for metalworking - replacement for Paramo ERO-SB ERO 1070 Volume: 1 liter Dilution: 4 - 15% Colour: pure light brown Description : Universal water-dilutable cutting and cooling fluid, contains mineral oil with a low content of aromatic hydrocarbons, with anionic and nonionic emulsifiers and corrosion inhibitors, inhibitors for yellow metals and stabilizing agents. Usage: Universal machining fluid for all types of chip machining intended for use in a working concentration of 4-15%. Suitable for machining cast iron, aluminum and yellow metals. When mixed with water with a hardness of up to 60°dH, E13 creates a stable emulsion with excellent viscosity and excellent cooling detergent capacity. Technical and safety data sheet - see attachment. Recommended dilution : Light machining and grinding : 4-7% Medium difficult machining : 7-10% Difficult machining : 10-15% Slow pouring of the concentrate into the water with continuous mixing. Can be used in automatic mixers based on venturi tube. Storage : stable when stored at 10-25°C for 12 months, avoid freezing if possible.

Universal soluble oil for metalworking - replacement for Paramo ERO-SB ERO 1070 Volume: 5 liters Dilution: 4 - 15% Colour: pure light brown Description : Universal water-dilutable cutting and cooling fluid, contains mineral oil with a low content of aromatic hydrocarbons, with anionic and nonionic emulsifiers and corrosion inhibitors, inhibitors for yellow metals and stabilizing agents. Usage: Universal machining fluid for all types of chip machining intended for use in a working concentration of 4-15%. Suitable for machining cast iron, aluminum and yellow metals. When mixed with water with a hardness of up to 60°dH, E13 creates a stable emulsion with excellent viscosity and excellent cooling detergent capacity. Technical and safety data sheet - see attachment. Recommended dilution : Light machining and grinding : 4-7% Medium difficult machining : 7-10% Difficult machining : 10-15% Slow pouring of the concentrate into the water with continuous mixing. Can be used in automatic mixers based on venturi tube. Storage : stable when stored at 10-25°C for 12 months, avoid freezing if possible.

Universal soluble oil for metalworking - replacement for Paramo ERO-SB ERO 1070 Volume: 10 liters Dilution: 4 - 15% Colour: pure light brown Description : Universal water-dilutable cutting and cooling fluid, contains mineral oil with a low content of aromatic hydrocarbons, with anionic and nonionic emulsifiers and corrosion inhibitors, inhibitors for yellow metals and stabilizing agents. Usage: Universal machining fluid for all types of chip machining intended for use in a working concentration of 4-15%. Suitable for machining cast iron, aluminum and yellow metals. When mixed with water with a hardness of up to 60°dH, E13 creates a stable emulsion with excellent viscosity and excellent cooling detergent capacity. Technical and safety data sheet - see attachment. Recommended dilution : Light machining and grinding : 4-7% Medium difficult machining : 7-10% Difficult machining : 10-15% Slow pouring of the concentrate into the water with continuous mixing. Can be used in automatic mixers based on venturi tube. Storage : stable when stored at 10-25°C for 12 months, avoid freezing if possible.

Cutting oil with a wide range of use, especially for machining on automatic lathes. Its formulation is designed more for tools made of high-speed steel, machining easily machinable light alloy steels and non-ferrous metals, including copper. It also handles more complex machining operations in these materials. When machining copper, the machined surface does not darken. Lubex CUT are petroleum oils that contain additives to improve the cutting and lubricating effect, reduce the formation of oil mist and protect machines, tools and workpieces from corrosion. Usage: Lubex CUT 22, 32, 32 A, 46 are intended for chip machining operations with precisely definable tool edge geometry (turning, milling, drilling, dividing material, threading and reaming, they also handle internal stretching operations, but only in material with good machinability). The properties of Lubex CUT 22 cutting oil can also be used in operations performed with tools where the geometry of the edge is not precisely defined(grinding threads and teeth). Lubex CUT 46 is an oil formulated for more demanding machining operations(gear milling, broaching and deep drilling).

Cutting oil with a wide range of use, especially for machining on automatic lathes. Its formulation is designed more for tools made of high-speed steel, machining easily machinable light alloy steels and non-ferrous metals, including copper. It also handles more complex machining operations in these materials. When machining copper, the machined surface does not darken. Lubex CUT are petroleum oils that contain additives to improve the cutting and lubricating effect, reduce the formation of oil mist and protect machines, tools and workpieces from corrosion. Usage: Lubex CUT 22, 32, 32 A, 46 are intended for chip machining operations with precisely definable tool edge geometry (turning, milling, drilling, dividing material, threading and reaming, they also handle internal stretching operations, but only in material with good machinability). The properties of Lubex CUT 22 cutting oil can also be used in operations performed with tools where the geometry of the edge is not precisely defined(grinding threads and teeth). Lubex CUT 46 is an oil formulated for more demanding machining operations(gear milling, broaching and deep drilling).

Cutting oil with a wide range of use, especially for machining on automatic lathes. Its formulation is designed more for tools made of high-speed steel, machining easily machinable light alloy steels and non-ferrous metals, including copper. It also handles more complex machining operations in these materials. When machining copper, the machined surface does not darken. Lubex CUT are petroleum oils that contain additives to improve the cutting and lubricating effect, reduce the formation of oil mist and protect machines, tools and workpieces from corrosion. Usage: Lubex CUT 22, 32, 32 A, 46 are intended for chip machining operations with precisely definable tool edge geometry (turning, milling, drilling, dividing material, threading and reaming, they also handle internal stretching operations, but only in material with good machinability). The properties of Lubex CUT 22 cutting oil can also be used in operations performed with tools where the geometry of the edge is not precisely defined(grinding threads and teeth). Lubex CUT 46 is an oil formulated for more demanding machining operations(gear milling, broaching and deep drilling).

Cutting oil with a wide range of use, especially for machining on automatic lathes. Its formulation is designed more for tools made of high-speed steel, machining easily machinable light alloy steels and non-ferrous metals, including copper. It also handles more complex machining operations in these materials. When machining copper, the machined surface does not darken. Lubex CUT are petroleum oils that contain additives to improve the cutting and lubricating effect, reduce the formation of oil mist and protect machines, tools and workpieces from corrosion. Usage: Lubex CUT 22, 32, 32 A, 46 are intended for chip machining operations with precisely definable tool edge geometry (turning, milling, drilling, dividing material, threading and reaming, they also handle internal stretching operations, but only in material with good machinability). The properties of Lubex CUT 22 cutting oil can also be used in operations performed with tools where the geometry of the edge is not precisely defined(grinding threads and teeth). Lubex CUT 46 is an oil formulated for more demanding machining operations(gear milling, broaching and deep drilling).

Special synthetic white assembly lubricating paste / grease / petroleum jelly - Lubex PAST NBI2 WHITE without abrasive powder metal content with PTFE / Teflon content for clean assembly work. Quantity: 450g (in can) Color: white/beige, shiny Base oil: synthetic Thickener: Calcium-sulfonate complex Working temperature: -30°C up to 150°C High adhesion to lubricated surfaces, very high resistance to being washed away by water or cooling liquid. Suitable for lubrication of turning, grinding and CNC universal chucks, screws, rolling and sliding bearings, where the speed is slow. Especially suitable for applications in humid environments. It is characterized by high application versatility and long-term high utility value. Ideal for use under very high static and dynamic loads, on machine tools, guide surfaces and rails. Lubrication of chucks with this lubricant increases the efficiency of the chuck, thanks to which most of the input torque is converted into (greater) clamping force - thus preventing loosening and possible falling out of the workpiece. Most chuck manufacturers recommend a weekly relubrication interval. Advantages of use: - Suitable as a paste during assembly work - Also suitable for non-ferrous metals - Prevents wear, contact and tribo corrosion - Excellent anti-friction and EP properties and high white solid lubricant content - Resistant to water, coolants and cutting fluids, alkalis and chemicals - Prevents material interface corrosion and wear corrosion in exposed cases -Thanks due to the included polymers, the paste has exceptional toughness and washout resistance.

Highly effective molybdenum paste for a denser grease consistency, suitable for drilling, thread cutting, extruding, stretching, pressing, extruding and bending. Particularly effective in machining problematic metals and alloys such as titanium and stainless steel. This is a MoS2 molybdenum paste enriched with sulfur and phosphorus compounds. The paste can be applied with a spatula or similar tool, smaller tools can be directly dipped into the paste. The paste has a low melting point, suitable for machining all kinds of metals including the most demanding metals and alloys such as titanium and nimon. The paste has excellent rinsing resistance - it can also be used under extreme pressures. Improves machining power and better surfaces can be used with it. Reduced friction prolongs tool life and allows faster material removal. Packaging 35g

Highly effective molybdenum paste for a denser grease consistency, suitable for drilling, thread cutting, extruding, stretching, pressing, extruding and bending. Particularly effective in machining problematic metals and alloys such as titanium and stainless steel. This is a MoS2 molybdenum paste enriched with sulfur and phosphorus compounds. The paste can be applied with a spatula or similar tool, smaller tools can be directly dipped into the paste. The paste has a low melting point, suitable for machining all kinds of metals including the most demanding metals and alloys such as titanium and nimon. The paste has excellent rinsing resistance - it can also be used under extreme pressures. Improves machining power and better surfaces can be used with it. Reduced friction prolongs tool life and allows faster material removal. Packaging 60g

Highly effective molybdenum paste for a denser grease consistency, suitable for drilling, thread cutting, extruding, stretching, pressing, extruding and bending. Particularly effective in machining problematic metals and alloys such as titanium and stainless steel. This is a MoS2 molybdenum paste enriched with sulfur and phosphorus compounds. The paste can be applied with a spatula or similar tool, smaller tools can be directly dipped into the paste. The paste has a low melting point, suitable for machining all kinds of metals including the most demanding metals and alloys such as titanium and nimon. The paste has excellent rinsing resistance - it can also be used under extreme pressures. Improves machining power and better surfaces can be used with it. Reduced friction prolongs tool life and allows faster material removal. Packaging 100g

Highly effective molybdenum paste for a denser grease consistency, suitable for drilling, thread cutting, extruding, stretching, pressing, extruding and bending. Particularly effective in machining problematic metals and alloys such as titanium and stainless steel. This is a MoS2 molybdenum paste enriched with sulfur and phosphorus compounds. The paste can be applied with a spatula or similar tool, smaller tools can be directly dipped into the paste. The paste has a low melting point, suitable for machining all kinds of metals including the most demanding metals and alloys such as titanium and nimon. The paste has excellent rinsing resistance - it can also be used under extreme pressures. Improves machining power and better surfaces can be used with it. Reduced friction prolongs tool life and allows faster material removal. Packaging 400g