Metalworking tools

Set of machine taps with a spiral groove / set of spiral taps HSSE-PM FAN The set contains taps: M3 / M4 / M5 / M6 / M8 / M10 - according to DIN371 (reinforced shank) M12 - according to DIN376 (" thin shank - common from M12 upwards) Tolerance: ISO2 / 6H Material: HSSE-PM ( sintered cobalt steel) Coating: TiAlSiN Number of lead teeth: C (2-3 teeth) Usage - blind hole: 1.4: Alloy steels, cold drawn tool steel up to 1000N/mm2 1.5: Hardened and hardened steels up to 38 HRC up to 1200N/mm2 2.1 : Ferritic and martensitic stainless steel up to 1000N/mm2 2.3 : Heat-resistant corrosion-resistant steel up to 1100N/mm2 3.3 : Nodular and tempered cast iron up to 700N/mm2 3.4 : Nodular and malleable cast iron up to 1000N/mm2 1.3 : Structural and carbon steel, low alloy steel, steel castings up to 1100N/mm2 6.4 : Bronze and aluminum up to 1200N/mm2 7.4 : Aluminum alloys with silicon content Si > 10%, up to 400N/mm2 8.2 : Thermosets and hardened plastics Cat. no.: Z4-565001-0312

Clamping tip fixed MK 1 with a peak angle of 60°. The entire tip is hardened to a hardness of HRC 58 to 62. d = 13.5 mm L = 85 mm l = -(this part is conical) V - max. circumferential runout = 0.003 mm Q - max- weight of the workpiece = 125 kg Standard: none, replacement for ČSN 243310 The tip has two flats - for unlocking with a key, possibly fixing the drifting heart.

Fixed clamping point MK 2 with a peak angle of 60°. The entire tip is hardened to a hardness of HRC 58 to 62. d = 13.5 mm L = 123 mm l = 50 mm V - max. circumferential throw = 0.003 mm Q - max- weight of the workpiece = 325 kg Standard: no, replacement for ČSN 243310 The tip has two flats - for opening with a key, or fixing the driving heart.

Fixed clamping point MK 2 with a peak angle of 60°. The entire tip is hardened to a hardness of HRC 58 to 62. d = 19 mm L = 103 mm l = - (this part is conical) V - max .circumferential throw = 0.003 mm Q - max- workpiece weight = 325 kg Standard: none, replacement for ČSN 243310 The tip has two flats - for unlocking with a key, or fixing the driving heart.

Fixed clamping point MK 2 with a peak angle of 60°. The entire tip is hardened to a hardness of HRC 58 to 62. d = 20 mm L = 126 mm l = 50 mm V - max. circumferential throw = 0.003 mm Q - max- weight of the workpiece = 325 kg Standard: none, replacement for ČSN 243310 The tip has one flat - for fixing the driving heart.

Fixed clamping point MK 3 with a peak angle of 60°. The entire tip is hardened to a hardness of HRC 58 to 62. d = 20 mm L = 135 mm l = 50 mm V - max. circumferential throw = 0.003 mm Q - max- weight of the workpiece = 650 kg Standard: none, replacement for ČSN 243310 The tip has one flat - for fixing the drift heart.

Fixed clamping point MK 4 with a peak angle of 60°. The entire tip is hardened to a hardness of HRC 58 to 62. d = 20 mm L = 160 mm l = 46 mm V - max. circumferential throw = 0.003 mm Q - max- workpiece weight = 450 kg Standard: none, replacement for ČSN 243310 The tip has two flats - for opening with a key.

Fixed clamping point MK 4 with a peak angle of 60°. The entire tip is hardened to a hardness of HRC 58 to 62. d = 33 mm L = 175 mm l = - (this part is conical) V - max .circumferential throw = 0.003 mm Q - max- weight of the workpiece = 450 kg Standard: none, replacement for ČSN 243310 The tip has two flats - for opening with a key.

Fixed MK 2 clamping tip with 60° apex angle and cemented carbide insert. ČSN 24 3311 d = 20 mm L = 100 mm l = 34 mm V - max. peripheral runout = 0.003 mm Q - max- workpiece weight = 130 kg Standard: replacement for ČSN 243317 The tip has two flats - for opening with a key.

Fixed flattened clamping point MK 1 with a 60° apex angle and a cemented carbide insert. . ČSN 24 3317 d = 11 mm L = 80 mm l = 23 mm V - max. peripheral runout = 0.003 mm Q - max- workpiece weight = 50 kg

Fixed flattened MK 2 clamping tip with 60° apex angle and cemented carbide insert. d = 17 mm L = 120 mm l = 50 mm V - max. peripheral runout = 0.003 mm Q - max- workpiece weight = 325 kg Standard: ČSN 243317, custom production - for a grinder

Extended clamping point fixed flattened MK 2 with apex angle 60° and insert made of cemented carbide - for grinders d= 17 mm L = 144 mm l = 75 mm Vertex angle: 60° Other dimensions - see attached photo Accuracy: 0.010 mm Standard: ČSN 243317, custom production - for sander