Metalworking tools

Set for bending, deburring B10, B20, B30 - Adapter for E-type blades - E100, E200, E300 - Tightening key

Set for bending, deburring Set containing: - Adjustable length bracket up to 230mm, M5 and M7 thread - E-type knife adapter E - Knife E100, E200 - Folding knife L3, L4, L5, L6 - Allen key - Tightening key

HSS Three-Sided Countersinks Material: HSS - High-Speed ??Steel Angle: 90 ° (90st.) Set of Countersinks with Diameters: 5mm (4mm Stop) 6mm (stopper 5mm) 8mm (stem 6mm) 10mm (stem 6mm) 12mm (stem 8mm) Wood cassette

90 ° (90st.) < 10.4mm br> Plastic cassette

90 ° (90st.) < 6,0mm (stopper 5mm) 8,0mm (stem 6mm) 10,0mm (stem 6mm) 12,0mm (stem 8mm) 15,0mm (10mm stopper) 16mm (10mm stem) 20,5mm (10mm stem) 23,0mm (10mm stem) 25,0mm (10mm stem)

Diamond grinding wheel grinder with magnetic holder. Leveling shank 10mm, length 50mm Min. height of the tip in cube: 80mm Spare parts with diamond can also be purchased with us

Set of straight collets Set contains collets: 3/4/5/6/8/10/12/14/16/18/20/22/24/25 mm Morse taper: MK 4 Internal thread collet: M16 Usage: For direct clamping !Machine with a cylindrical shank

ISO40 / ISO30, ISO40 / 30 For tools according to DIN2080 and JIS B 6339 / MAS BT / STN 241480

ISO50 / ISO30 Straight Straightener ISO50 Straight Straight Cone ISO30 Inner Straight Cone Overall Length (without Stones): 122mm For Tools By Standard DIN2080 and JIS B 6339 / MAS DIN standards now available in electronic format (PDF) ČSN 241480

Honeycomb cutter Three-sided, non-symmetrical, for machining in three axes Material K30: for machining materials that produce a short, crumbly chip. Especially for gray cast iron, non-ferrous alloys, non-metallic materials Diameter 10mm Shank diameter: 12mm Overall length: 83mm Cutter length: 26mm

Set for extrusion of wires Set contains: Extrusion mandrel 10/12/14 mm(10x350mm, 12x350mm, 14x350mm) 1x Guide sleeve dia. 32/34/35/36/38 mm x length 100mm 1x Guide sleeve dia. 40/42/44/45/46/48/50 mm x length 125mm 6x Washer for extrusion mandrels 3x control pen Usage: Via guide uses a thorn to push the pen holder. Used in conjunction with a manual / hydraulic press.

Set for extrusion of grooves Set contains: 1x Extrusion mandrel 2mm(length 125mm) 1x Extrusion mandrel 3mm (length 125mm) 1x Guide sleeve dia. 6mm(length 28mm) 1x Guide sleeve dia. 8mm(length 28mm) 1x Guide sleeve dia. 10mm(length 28mm) 1x Pad under the extrusion mandrels Usage: The pen holder is pushed through the guide with the help of the mandrel. Used in conjunction with a manual / hydraulic press.