/ Registration
Not sure? tel: +420 602 716 471 e-mail: objednavky@kovonastroje.cz
CZ SK EN DE
Homepage Metalworking tools

Metalworking tools

Product count: 5318
1 ... 421 423 425 ... 444

  • Set of 8 pairs of milling pads - 160mm x 8mm

    Set of 8 pairs of milling pads - 160mm x 8mm

    Milling Washers, Vices, Milling Washers Set of 8 Pairs 160mm Length Washer Size: 8x12; 8x17; 8x22; 8x25; 8x28; 8x32; 8x36; 8x38mm Accuracy: 0,01mm Flatness: 0,005mm Hardness 55 HRC

    In stock
    115,98 € with VAT

  • Set of 8 pairs of milling pads - 200mm x 8mm

    Set of 8 pairs of milling pads - 200mm x 8mm

    Milling Washers, Vices, Milling Washers 8x17mm 8x22mm 8x25mm 8x28mm 8x32mm 8x36mm 8x38mm 8x43mm Accuracy: 0,01mm Hardness 55 HRC

    In stock
    139,60 € with VAT

  • M4 T15 countersunk head screw, L = 8mm

    M4 T15 countersunk head screw, L = 8mm

    Force screw in the knife holder. Thread Size: M4 Head: TORX 15 Overall length (with head): 8mm

    On request
    1,22 € with VAT

  • BSCY nut ??tap 1/4 - 26 HSS, 60°

    BSCY nut ??tap 1/4 - 26 HSS, 60°

    Home nut Taps on English thread cyclo Home Size: BSCY 1/4 "x 26 Home Point angle: 60 ° Home Gradient: 26 EAST inch Dimension: l1 - 120mm l2 - 20mm d2 - 4,5mm a - 3,5mm Material: HSS Thread BSCY used in motorcycles made during the war, is still used today.

    In stock
    11,56 € with VAT

  • BSCY nut ??tap 5/16 - 26 HSS, 60° - without square

    BSCY nut ??tap 5/16 - 26 HSS, 60° - without square

    Nut tap, for English bicycle thread Dimensions: BSCY 5/16 "x 26 Peak angle: 60° Pitch: 26 feet per inch Dimensions: l1 - 78mm l2 - 36mm d2 - 6,3mm a - without square Material: HSS BSCY thread used for motorcycles made during the war, it is still used today.

    In stock
    11,41 € with VAT

  • BSCY 7/16 - 26 HSS nut tap, 60°

    BSCY 7/16 - 26 HSS nut tap, 60°

    Dimensions: BSCY 7/16 "x 26 Peak angle: 60 ° Climbing: 26 strokes per inch Dimensions: l1 - 140mm l2 - 20mm d2 - 8mm a - 6,2mm Material: HSS Thread BSCY was used with motorcycles made during the war are still used today.

    In stock
    14,65 € with VAT

  • Nut tap BSCY 9/16 - 20 HSS left, 60°

    Nut tap BSCY 9/16 - 20 HSS left, 60°

    Left nut tap, for English bicycle plug Size: BSCY 9/16 "x 20 Top angle: 60 Â ° Â ° Pitch: 20 feet per inch Material: HSS < br> The BSCY thread was used in war-made motorcycles, it is still used today.

    In stock
    17,30 € with VAT

  • BSCY 9/16 - 20 HSS nut tap, 60°

    BSCY 9/16 - 20 HSS nut tap, 60°

    Matrix screwdriver, for English bicycle thread Size: BSCY 9/16 "x 20 Peak angle: 60A‚ Â ° Pitch: 20 feet per inch Material: HSS Thread BSCY was used in motorcycles made during the war, it is still used today.

    In stock
    17,29 € with VAT

  • Angle magnet, magnetic clamp 95x65x14mm 45 / 18kg - angles 30°, 45°, 75°, 60°, 90°

    Angle magnet, magnetic clamp 95x65x14mm 45 / 18kg - angles 30°, 45°, 75°, 60°, 90°

    Welding magnet, practical aid, clamp for easy metal holding in welding, drilling, riveting, ..... Allows to hold material at 30, 45, 60, 75 and 90 degrees angles. Dimensions (Maximum Dimension): Height: 65mm Width: 95mm Thickness: 14mm

    In stock
    2,93 € with VAT

  • Angle magnet, magnetic clamp 145x87x16mm 70 / 40kg - angles 90°, 135°, 45°

    Angle magnet, magnetic clamp 145x87x16mm 70 / 40kg - angles 90°, 135°, 45°

    Welding magnet, practical aid, clamp for easy metal holding in welding, drilling, riveting, - angles Allows to hold material at angles: 45st. , 90th. , 135th. Dimensions (Maximum Dimension): Height: 87mm Width: 145mm Thickness: 16mm

    In stock
    6,55 € with VAT

  • Spare blade / deburring wheel for scraper for chamfering sheet metal edges on both sides

    Spare blade / deburring wheel for scraper for chamfering sheet metal edges on both sides

    Spare Blade / Double Sided Roller for Double Side Chamfering Diameter: 12mm Height: 5,3mm Clamping: Thread M3,5 The price is for 1 piece!

    In stock
    2,98 € with VAT

  • Adapter for type D needling knives

    Adapter for type D needling knives

    D20, D25, D30, D40 - see related products Clamping pin and holder - see related products

    In stock
    1,40 € with VAT

Do you need advice?

Jakub Novák, Orders

Free shipping

There is possibility of free shipping. For more information click here.

Fast shipping

If on stock, you will recieve your order in 1 working day.

Store

Most of the goods are available at the shop.

Individual discounts

Are you a loyal customer or do you want to become one? Contact us!

Metalworking tools