Metalworking tools
-
Turning
-
Milling
-
Drilling
-
Thread cutting
-
Reaming and drilling
-
Countersinking and needling
-
Broaching
-
Yours - thermdrill
-
Welding
-
Grinding, cutting and polishing of metal
-
Stretching and extrusion
-
Řezné oleje, tuky a odlučovače
-
Cutter Master HDT30 / ON-220 tool sharpener
Cutter Master Grinder - Cutters, Drills, Countersinks, Drills, Reamers, Taps, Drills ... with Pneumatic Spindle Mounting - To Enhance High Tool Sharpness, Type ON-220 Maximum Cut Tool Diameter: 50 mm Cutter Length: 245 mm 5C: 3 - 25 mm Transverse Shift - Y-Axis: 75 mm Longitudinal Shift - X-Axis: 150 mm Tilt Range Holder: 360 ° Angle adjustment angle: -5 ° to 30 ° Wheel travel: 250 mm Nonius cutting: 0,02 mm / divide, total 100 pieces Spindle has a flange - suitable for 2pcs. 3br. 4br. 6 and 12 tools. The grinder has both right and left rotation. Speed: 2800 rpm. Disc: 125x50x31,75mm Dimensions: 700x700x600mm Power supply: 230V / 50Hz Required pressure: 0,63 MPa Motor protection: IP54 Bulb: 50W / 24V / GY 6,35 OSRAM Scope of delivery: Supplied without collet , 5C collet can be purchased with us. Application: Suitable for sharpening blades / grinding cylindrical parts of tools. Also suitable for forehead grinding. Also suitable for grinding spiral drill bit drill bit drill (without cutter).
In stock2.506,56 € with VAT -
Quick-release knife holder 98x40x51 Dickson T2 / S2
Quick-release knife holder for quick tool change - multi-fix style - size T2 type Dixon For knives with max. four edges: 20x20mm When the knife holders in the head are replaced, the repeatable clamping accuracy is 0.01 mm. 1x holder 98x40x51mm for four edge knives, for knives with max. size 16mm 1pc spare screw with hex head
In stock58,61 € with VAT -
Dickson T2 / S2 quick-release knife holder
Quick-release knife head / knife holder for quick tool change - multi-fix style - size T2(S2) type Dixon For knives with max. four edges: 20x20mm When replacing the holder holders in the head, the repeatable accuracy is 0.01mm. Set contains: 1x clamping head 100x100x70mm 3x holder 98x40x51mm for four square knives(type D), for knives of max. size 20mm 3pcs spare screws with four square heads 1x handle for locking the holder in the knife head 1x handle for tightening the four square heads Screw in knife holders Attention - the screw for attaching the knife head to the lathe support needs to be modified or a new one is needed - it is not part of the package. Center hole 25mm, washer diameter 44.5mm, upper hole diameter for 16mm screw.
In stock297,14 € with VAT -
Quick-release knife holder 73x32x34 Dickson M / S0
Quick-release knife holder for quick tool change - multi-fix style - size M type Dixon For knives with max. four edges: 16x16mm When the knife holders in the head are replaced, the repeatable clamping accuracy is 0.01 mm. 1x holder 73x32x34mm for four edge knives, for knives with max. size 16mm 1pc spare screw with hex head
In stock30,29 € with VAT -
Dickson M / S0 quick-release knife holder
Quick-release knife head / knife holder for quick tool change - multi-fix style - size M(S0) type Dixon For knives with max. four edge: 16x16mm When replacing the knife holders in the head, the repeatable clamping accuracy is 0.01 mm. Set contains: 1x clamping head 73x73x51mm 2x holder 73x32x34mm for four square knives, for knives with max. size 16mm 1x holder 73x32x34mm for round knives, for knives with a maximum diameter of 16mm 1x holder for a cutting blade height 19mm(3/4 ") with a width of 3,175mm 1x parting blade blade 4 pcs of spare screws with four square heads 1x handle for tightening four four square screws in knife holders Attention - the screw for attaching the knife head to the lathe support needs to be modified or a new one is made - it is not part of the package.
In stock206,50 € with VAT -
Dickson Mini quick-release knife holder
Quick-release knife head / knife holder for quick tool change - multi-fix style - size Mini type Dixon For knives with max. four edges: 12x12mm < br> When replacing the knife holders in the head, the repeatable clamping accuracy is 0.01 mm. Set contains: 1x clamping head 40x40x38mm 2x holder 50x20x25mm for four square knives, for knives with max. size 16mm 1x holder 50x20x25mm for round knives, for knives with max. Diameter 3/8 "(9,525mm) 1x holder for parting blade height 12.5mm(1/2" ) by width 2,235mm(3/32 ") * holders and clamping head are made of aluminum 4 pcs of spare screws 2 pcs of middle sleeves Screw M8 and M10
In stock80,10 € with VAT -
Quick-release knife holder 58x28x28 Dickson K / S00
Quick-release knife holder for quick tool change - multi-fix style - size K type Dixon For knives with max. four edges: 12x12mm When the knife holders in the head are replaced, the repeatable clamping accuracy is 0.01 mm. 1x holder 58x28x28mm for four edge knives, for knives with max. size 12mm 1pc spare screw with hex head
On request27,76 € with VAT -
Dickson K / S00 quick-release knife holder
Quick-release knife head / knife holder for quick tool change - multi-fix style - size K(S00) type Dixon For knives with max. four edge: 12x12mm When replacing the knife holders in the head, the clamping accuracy is 0.01mm. Set contains: 1x clamping head 58x58x38mm 2x holder 58x28x28mm for four edge knives, for knives with max. size 12mm 1x holder 58x28x28mm for round knives, for knives with max. Diameter 12mm 1x holder for parting blade 3,5x12x125mm 1x parting blade blade 4pcs spare Hexagon socket head cap screw 1x key for tightening the clamping head screws Attention - The screw for fastening the knife head to the lathe support needs to be modified or a new one is needed - not included. Through hole 11.2mm.
On request140,65 € with VAT -
Set of 8 pairs of curved washers 9-23mm
Spring washers for vise Washer length: 110mm Washer height: 9-11-13-15-17-19-21-23mm Washer thickness: 0.4mm < br> Made of high-quality spring steel, hardened, annealed, precisely ground. Suitable for thin and light workpieces. Height and parallelism guarantee: - 0,002mm
In stock49,03 € with VAT -
Set of 8 pairs of curved washers 25-39mm
Spring washers for vise Washer length: 110mm Washer height: 25-27-29-31-33-35-37-39mm Washer thickness: 0.4mm < br> Made of high-quality spring steel, hardened, annealed, precisely ground. Suitable for thin and light workpieces. Height and parallelism guarantee: - 0,002mm
In stock58,76 € with VAT