Metalworking tools

Jakobs rubber clamp for clamping of taper rollers and reamers, used in TAPMATIC, NAREX, VERTEX and KENNAMETAL threading and reaming heads. Clamping range: 2,3 to 4,6 mm Dimensions of collet (according to enclosed photos): D1: 21,8mm D2: 14, 0mm L: 12,7mm A: 40 ° Number of metal. touch surfaces: 4 Standard: DIN 6345 Ref. Codes: 9751 or 22200 or TC22200

Jakobs rubber clamp for clamping of taper rollers and reamers, used in TAPMATIC, NAREX, VERTEX and KENNAMETAL threading and reaming heads. Clamping range: 7,0 to 13,0 mm Dimensions of the collet (according to the attached photo): D1: 32,9mm D2: 19, 0mm L: 16,0mm A: 45 ° Number of metal. touch surfaces: 6 Standard: DIN 6345 Ref. Codes: 9749 or 24000 or TC24000

Jakobs rubber clamp for clamping of taper rollers and reamers, used in TAPMATIC, NAREX, VERTEX and KENNAMETAL threading and reaming heads. Clamping range: 4.5 to 9.7 mm Dimensions of the collet (according to the attached photo): D1: 32,9mm D2: 19, 0mm L: 16,0mm A: 45 ° Number of metal. touch surfaces: 6 Standard: DIN 6345 Ref. codes: 9750 or 24100 or TC24100

Jakobs rubber clamp for clamping of taper rollers and reamers, used in TAPMATIC, NAREX, VERTEX and KENNAMETAL threading and reaming heads. Clamping range: 2.8 to 7.0 mm Dimensions of the collet (according to the attached photo): D1: 30,0mm D2: 19, 0mm L: 15,7mm A: 45 ° Number of metal. touch surfaces: 6 Standard: DIN 6345 Ref. codes: 9867 or 24300 or TC24300

Jakobs rubber clamp for clamping of taper rollers and reamers, used in TAPMATIC, NAREX, VERTEX and KENNAMETAL threading and reaming heads. Clamping range: 1.8 to 4.5 mm Dimensions of the collet (according to the attached photo): D1: 32,9mm D2: 19, 0mm L: 16,0mm A: 45 ° Number of metal. contact surfaces: 6 Standard: DIN 6345

Assembled Angle Milling Head for Chamfering, for Interchangeable Inserts - VBD Diameter: 80 mm Angle: 45 ° Number of Blades: 8 (Rotate Disc 8x) Clamping Diameter: 22 mm Overall Height: 40 mm Type VBD : SNMX1206 Cat. No.: RM8ACM4063HR-H

Metal drill head with handle, up to drill diameter 13mm / 13S Cat. No. : 317257 Clamping range : 1.5-13mm Clamping thread : 1/2" x 20 UNF , 20 strokes per inch (corresponds to 12.7mm) Diameter body: 42.8mm Overall height: 59/74mm Standard: ČSN 241320 / CSN 24 1320 Usage: Narex drills and others.If you change the chuck, look at body of the existing chuck where the clamping thread should be indicated.

Metal drill head with a handle with ground jaws, clamps drills up to a diameter of 16 mm Cat. No. : 227152 For clamping a 3-16mm drill, taper B16 Body diameter 50mm, total height 67.5/86.5mm The mandrel is not part of the delivery, we can deliver it in version with MK2, MK3, MK4 Standard: ČSN 241320 / CSN 24 1320

Metal drill head with a handle with ground jaws, clamps drills up to a diameter of 16 mm Cat. no.: 72800 For clamping a 1.5-13mm drill, taper B16 Body diameter 42.8mm, total height 63/77mm The mandrel is not part of the delivery, we can it can be delivered in the version with MK2, MK3, MK4 Standard: ČSN 241320 / CSN 24 1320

Nonius DBP Scale Gauge with Three Scale Three scales for measuring welding properties. Material: INOX / stainless steel

Nonius DBP Scale Gauge with Three Scales - including Calibration Sheet Gauge Gauge Contains magnifying glass for easier reading of measured values. Three scales for measuring welding properties. Material: INOX / stainless steel

Measurement for welds, vernier type DBP with three scales, negative scale - for measuring ignition to minus - pre-ignition - and angle Measurement for measuring fillet welds, 3 scales Includes a magnifying glass for easier reading of measured values values. Three scales for measuring weld properties. Material: INOX / stainless steel Division 0.2 mm.