Metalworking tools
-
Turning
-
Milling
-
Drilling
-
Thread cutting
-
Reaming and drilling
-
Countersinking and needling
-
Broaching
-
Yours - thermdrill
-
Welding
-
Grinding, cutting and polishing of metal
-
Stretching and extrusion
-
Řezné oleje, tuky a odlučovače
-
Pliers for J444 tap, Jacobs Rubber-Flex
Jakobs rubber clamp for clamping of taper rollers and reamers, used in TAPMATIC, NAREX, VERTEX and KENNAMETAL threading and reaming heads. Clamping range: 1.8 to 4.5 mm Dimensions of the collet (according to the attached photo): D1: 32,9mm D2: 19, 0mm L: 16,0mm A: 45 ° Number of metal. contact surfaces: 6 Standard: DIN 6345
On request106,95 € with VAT -
Insertable angle cutter 80mm 45° for inserts SNMX 1206, KORLOJ
Assembled Angle Milling Head for Chamfering, for Interchangeable Inserts - VBD Diameter: 80 mm Angle: 45 ° Number of Blades: 8 (Rotate Disc 8x) Clamping Diameter: 22 mm Overall Height: 40 mm Type VBD : SNMX1206 Cat. No.: RM8ACM4063HR-H
On request623,85 € with VAT -
Drill chuck 1.5 - 13 mm with thread 1/2 - 20 UNF with handle, ROHM
Metal drill head with handle, up to drill diameter 13mm / 13S Cat. No. : 317257 Clamping range : 1.5-13mm Clamping thread : 1/2" x 20 UNF , 20 strokes per inch (corresponds to 12.7mm) Diameter body: 42.8mm Overall height: 59/74mm Standard: ČSN 241320 / CSN 24 1320 Usage: Narex drills and others.If you change the chuck, look at body of the existing chuck where the clamping thread should be indicated.
On request39,94 € with VAT -
Drill chuck 3.0 - 16 mm B16 with handle, ROHM
Metal drill head with a handle with ground jaws, clamps drills up to a diameter of 16 mm Cat. No. : 227152 For clamping a 3-16mm drill, taper B16 Body diameter 50mm, total height 67.5/86.5mm The mandrel is not part of the delivery, we can deliver it in version with MK2, MK3, MK4 Standard: ČSN 241320 / CSN 24 1320
On request65,98 € with VAT -
Drill chuck 1.5 - 13 mm B16 with handle, ROHM
Metal drill head with a handle with ground jaws, clamps drills up to a diameter of 16 mm Cat. no.: 72800 For clamping a 1.5-13mm drill, taper B16 Body diameter 42.8mm, total height 63/77mm The mandrel is not part of the delivery, we can it can be delivered in the version with MK2, MK3, MK4 Standard: ČSN 241320 / CSN 24 1320
On request51,28 € with VAT -
Weld seam measuring template, type DBP - 3 ABC scales, with calibration
Nonius DBP Scale Gauge with Three Scales - including Calibration Sheet Gauge Gauge Contains magnifying glass for easier reading of measured values. Three scales for measuring welding properties. Material: INOX / stainless steel
On request45,34 € with VAT -
Weld seam measuring template, type DBP with negative scale
Measurement for welds, vernier type DBP with three scales, negative scale - for measuring ignition to minus - pre-ignition - and angle Measurement for measuring fillet welds, 3 scales Includes a magnifying glass for easier reading of measured values values. Three scales for measuring weld properties. Material: INOX / stainless steel Division 0.2 mm.
In stock43,34 € with VAT -
Template for measuring the weld seam, type DBP with a negative scale, with calibration
Measurement for welds, vernier type DBP with three scales, negative scale - for measuring ignition to minus - pre-ignition - and angle - including calibration sheet Measurement for measuring fillet welds, 3 scales Includes magnifying glass for easier reading of measured values. Three scales for measuring weld properties. Material: INOX / stainless steel Division 0.2 mm.
On request59,50 € with VAT -
Mini digital protractor with magnetic base 4 x 90°, Accurata
Digital Digitometer with Magnet / Magnets 0-360 ° Always displayed angle 0-90 ° Dimensions of the slope: 52x52x26mm Relative measurement function (button 0 %) * HOLD function (keeps the measured value) * Calibrate function for recalibrating the inclinometer on a flat (0 °)
On request40,76 € with VAT