Metalworking tools

Metal drill head with handle, up to drill diameter 13mm / 13S Cat. No. : 317257 Clamping range : 1.5-13mm Clamping thread : 1/2" x 20 UNF , 20 strokes per inch (corresponds to 12.7mm) Diameter body: 42.8mm Overall height: 59/74mm Standard: ČSN 241320 / CSN 24 1320 Usage: Narex drills and others.If you change the chuck, look at body of the existing chuck where the clamping thread should be indicated.

Metal drill head with a handle with ground jaws, clamps drills up to a diameter of 16 mm Cat. No. : 227152 For clamping a 3-16mm drill, taper B16 Body diameter 50mm, total height 67.5/86.5mm The mandrel is not part of the delivery, we can deliver it in version with MK2, MK3, MK4 Standard: ČSN 241320 / CSN 24 1320

Metal drill head with a handle with ground jaws, clamps drills up to a diameter of 16 mm Cat. no.: 72800 For clamping a 1.5-13mm drill, taper B16 Body diameter 42.8mm, total height 63/77mm The mandrel is not part of the delivery, we can it can be delivered in the version with MK2, MK3, MK4 Standard: ČSN 241320 / CSN 24 1320

Nonius DBP Scale Gauge with Three Scale Three scales for measuring welding properties. Material: INOX / stainless steel

Nonius DBP Scale Gauge with Three Scales - including Calibration Sheet Gauge Gauge Contains magnifying glass for easier reading of measured values. Three scales for measuring welding properties. Material: INOX / stainless steel

Measurement for welds, vernier type DBP with three scales, negative scale - for measuring ignition to minus - pre-ignition - and angle Measurement for measuring fillet welds, 3 scales Includes a magnifying glass for easier reading of measured values values. Three scales for measuring weld properties. Material: INOX / stainless steel Division 0.2 mm.

Measurement for welds, vernier type DBP with three scales, negative scale - for measuring ignition to minus - pre-ignition - and angle - including calibration sheet Measurement for measuring fillet welds, 3 scales Includes magnifying glass for easier reading of measured values. Three scales for measuring weld properties. Material: INOX / stainless steel Division 0.2 mm.

Digital Digitometer with Magnet / Magnets 0-360 ° Always displayed angle 0-90 ° Dimensions of the slope: 52x52x26mm Relative measurement function (button 0 %) * HOLD function (keeps the measured value) * Calibrate function for recalibrating the inclinometer on a flat (0 °)

Welding gauge, for gap between sheets, between welded surfaces, for hole diameters Range: 1-15 mm Cutting: 0,1mm Gauge total length: 145mm Material: stainless steel / INOX On the other hand is an inch scale

Convex and concave welding gauge This gauge set includes dipsticks from 3.0mm to 25mm All dimensions are embossed on the gauge sheets. Material: stainless steel

Gauge for convex and concave welds Material: Stainless steel Can be measured in millimeters and inches This set contains gauges from 3,2mm to 25,4mm, in inches 1/8 "- 1 " All dimensions are embossed on the dies.

INOX