Grinders and polishers

Pneumatic straight grinder Pneumatic straight grinder is designed for demanding work in welding and poorly machined jobs, but also for fine grinding, deburring, milling and engraving. The tool allows you to replace and mount clamping clamps to hold tools with a 6 or 3 mm shank diameter. High precision production and quality materials guarantee lower vibration at work, higher performance and longer service life than conventional wrenches Composite body grinder is pleasantly holding and waking Adjustable air exhaust Continuous speed adjustment Main Technical parameters: Shank diameter: 6 or 3mm Length: 170mm Speed ??without load: 25000 / min Air consumption: 120l / min max. working pressure: 6.3bar (0.63 MPa) Nipple diameter: 1/4 " weight: 0.39kg

Pneumatic eccentric grinder without suction hose Diameter of grinding wheel carrier: 150mm Free speed: 10,500 rpm / min. Speed ??â € ‹â €‹ control possible Operating pressure 6 Bar Air consumption 226 l / min. Recommended hose diameter 9.5mm | Inlet thread 1/4 "G Eccentricity 5mm A quick coupling mandrel is supplied with the grinder. Pneumatic eccentric grinder is designed for grinding wood, metal, plastic, grouts and enamels and also for polishing.is the outlet for the connection of an external dust extraction and a speed controller.The grinding wheel carrier is equipped with a velcro that allows quick tool-free replacement of the grinding wheel paper.

Pneumatic grinder straight Speed ??without load: 22.000 / min. Air consumption: 113 l / min (given by importer, real approx. 400 l / min) Maximum working pressure: 6.3 bar (0.63 MPa) Couplings 1/4 "G Supplied with quick release coupling pin Set of abrasive bodies with 3 and 6mm stems 2 mounting keys

Pneumatic grinder straight Type: GD 170 Contains clamps for clamping tools with 3mm and 6mm shank Speed ??without load: 22.000 rpm. Air consumption: 113 l / min (given by the importer, real approx. 400 l / min) Maximum working pressure: 6.3 Bar (0.63Mpa) Connection to the connecting mandrel: 1/4 "G This grinder is designed for fine grinding, deburring, milling and engraving

Pneumatic eccentric grinder without suction hose Diameter of the grinding wheel carrier: 150mm The attachment is made on Velcro free: 10,500 rpm Air volume controllable Eccentricity 5mm Recommended hose diameter 9.5mm | Operating pressure 6.3 Bar | Air consumption 150 l / min. Inlet thread 1/4 "G A pin for a quick coupling is also supplied with the grinder.

Spare pliers for pneumatic grinder

Air grinder with 3 and 6mm collet and abrasive set 1/4 "G air compressor Speed: 25.000 rpm Pressure: 6 atm (6bar) Direct pneumatic grinder with collet clamp Hobby design,

Spare pliers for pneumatic grinder

Spare pliers for pneumatic grinder

Vibrating pneumatic grinder The size of the grinding plate holder is 90x165mm. Load paper with "pin". Inlet thread is 1/4 "G. No-load speed 8.000 rpm Air consumption approx. 360 l / min (6 CFM) Operating pressure 6.3 Bar Recommended hose width 9.5mm

Direct pneumatic polisher elongated Polisher pneumatic with 6mm collet for clamping polishing discs 3mm collet can be purchased Overall length 216mm Neck length 51mm, nut diameter 21mm Body diameter of grinder 40mm < Minimum Hose 9.5mm Air Consumption: 115 l / min. No-load speed 4.000 rpm. All-metal body. Supplied with 1/4 "G male threaded spindle and spanner for quick coupling The illustrated felt disc on the stem is not included in the scope of delivery but can also be purchased at our e-shop.