Grinders and polishers
-
Pneumatic shank grinder PSS PRO with a set of accessories, Aircraft
For grinding, polishing and milling models, tools and preparations. Clamping shank: 2.94mm (NOT CLAMPED DIAMETER 3.0MM) Speed: 56,000 rpm Working pressure max.: 6.3 bar Air consumption: 170 l/min The sander needs to be constantly lubricated - check the contents of the lubricant!
On request47,84 € with VAT -
Professional pneumatic angle grinder 75mm GP-823AR3 for QRC discs, GISON
Professional Air Angle Grinder with Rear Air Pipe and Continuous Speed ??Control for Quick Change Disc QRC Discs Speed: 15.000 rpm, adjustable Drilling Diameter: 75mm Included a QRC wheel carrier, a Velcro fastener can be purchased with this brush - see attached pictures. Head angle: 100 ° Overall length: 180mm Max. pressure: 6,2 bar (90PSI) Air consumption: 0,49 m3 / min Inlet fitting: 1/4 " Minimum air hose diameter: 5mm Noise level: 78dBA Vibration:
In stock90,76 € with VAT -
Rotor blade set(5pcs) for GP-823AR3, GISON
Pertinax drive blades(5pcs) for GP-823AR3 Length: 38mm Height: 8,6mm Thickness: 1,8mm The blades are part of the drive mechanism of the pneumatic tool. The slats wear out normally over time, or if the drive mechanism is not sufficiently lubricated with air without impurities, their faster abrasion occurs. (using a dry tool without an eraser) and needs to be replaced. This is a consumable item.
On request10,56 € with VAT -
Professional pneumatic angle grinder 75mm GP-823AR3 with abrasive, GISON
Professional Air Angle Grinder with Rear Air Outlet & Continuous Speed ??Control - Set with Abrasive : 100 ° Overall length: 180mm Max. pressure: 6,2 bar (90PSI) Air consumption: 0,49 m3 / min Inlet fitting: 1/4 " Minimum air hose diameter: 5mm Noise level: 78dBA Vibration: Manufacturer GISON meets ISO-9001/2000 quality system certification Pneumatic tools are recommended to lubricate with the professional lubricant Mobil Velocite 6 - see related products.
On request227,24 € with VAT -
Professional pneumatic angle grinder 50mm GP-824CGR, GISON
Professional Air Angle Grinder with Rear Air Outlet & Continuous Speed ??Control Speed: 22.000 rpm, Adjustable Wheel Diameter: 50mm Wheel Width: 3.8mm Angle heads: 100 ° Overall length: 177mm Max. Pressure: 6,2 bar (90PSI) Air consumption: 0,35 m3 / min Inlet fitting: 1/4 " Minimum air hose diameter: 6,5mm Noise level: 75dBA < br> Vibration:
In stock93,35 € with VAT -
Set of rotor blades(5pcs) for GP-824CGR, GISON
Pertinax drive blades(5pcs) for GP-824CGR Length: 32mm Height: 7,0mm Thickness: 1,7mm The slats are part of the drive mechanism of the pneumatic tool. The slats wear out normally over time, or if the drive mechanism is not sufficiently lubricated with air without impurities, their faster abrasion occurs. (using a dry tool without an eraser) and needs to be replaced. This is a consumable item.
In stock10,56 € with VAT -
Professional corner 100° pneumatic grinder GP-824MR, GISON
Professional Corner 100 ° Air Blower with Rear Air Outlet and Continuous Speed ??Control Speed: 22.000 rpm, adjustable Glider: 6mm ( 3mm can be purchased) Body Diameter: 35mm Nut Diameter: 17/19mm Extension Nut with Nut: 40mm Overall Length: 170mm Max. Pressure: 6.2 bar (90PSI) Air consumption: 0.49 m3 / min Inlet fitting: 1/4 " Minimum air hose diameter: 5mm Noise level: 80dBA Vibration:
In stock100,93 € with VAT
