Countersinks

Set of 6 extended three-edged countersinks, cylindrical shank Angle: 90° Set contents: 6.3mm ( shank 5mm) 8.3mm ( shank 6mm) 10.4mm ( shank 6mm) 12.4mm ( shank 8mm) 16.5mm ( shank 10mm) 20.5mm ( shank 10mm) Material: HSS-XE - high-alloy cobalt high-speed HSSE steel (68 HRC) Coating: BLUE-TEC - increases tool life, ideal for dry machining or with a minimum of lubricant Standard: DIN335 / DIN335C Karnasch countersinks are precisely ground with a CBN wheel, which guarantees that the cutting edge of the countersink is always the highest point and the countersinking works as it should. This way of grinding also achieves (compared to milled countersinks) that the cutting edge is smoother and sharper - greater efficiency and lifetime of the tool. The result of this grinding is perfect chip removal, trouble-free work, a perfect surface without scratches and a perfectly centered recess. Supplied in a plastic case.

Countersink Countersink / Countersink for VBD Range: 3 - 25 mm Rectangle Angle: 45 ° Clamping Shank: 12mm Overall Length: 110mm Screw: M4 / T15 The holder is free of exchangeable plate. TCMT 16T3 .. and TCGT 16T3 .. Cat. No .: 6004-002

HSSE HSSE 5mm) 8,0mm (Stopper 6mm) 10,0mm (Stopper 6mm) 12,0mm (Stopper 8mm) 16,0mm (Stopper 8mm) 20,0mm 10mm) Sheet metal cassette

90 ° (90st.) < 10.0mm Metal Cassette

90 ° (90st.) < 10.4mm Plastic cassette

HSS DIN335C Countersink HSS Material: HSSE Angle: 90 ° (90st. Stopper 4mm 5,0mm (Stopper 4mm) 6,0mm (Stopper 5mm) 6,3mm (Stopper 5mm) 7,0mm (Stopper 6mm) 8,0mm (Stopper 6mm) 8,3mm (stem 6mm) 10,0mm (stem 6mm 10,4mm (stem 6mm) 11,5mm (stem 8mm) 12,4mm (stem 8mm ) 15,0mm (10mm stem) 16,5mm (10mm stem) 19,0mm (stem 10mm) 20,5mm (stem 10mm) 23,0mm (stem 10mm ) 25,0mm (10mm stem) Plastic cassette

HSS TiN Countersink HSS Material: HSS - , TiN = Titanium-Nitride Coating Angle: 90 ° (90st.) The set contains countersinks with diameters: 6,3mm (stopper 5mm) 8,3mm (stem 7mm) 10,4mm (stem 7mm) 12,4mm (stem 8mm) 16,5mm (stem 10mm) 20,5mm (10mm stopper) Plastic cassette

HSSE HSSE 5mm) 8,3mm (stem 7mm) 10,4mm (stem 7mm) 12,4mm (stem 8mm) 16,5mm (stem 10mm) 20,5mm (stem 10mm) Plastic cassette

Set of 6 countersinks HSSE TiN countersinks Material: HSSE - High-speed steel with cobalt admixture, TiN = titanium-nitride coating angles: 90 Â °(90 Â °) The set contains countersinks with diameters: 6,3mm(shank 5mm) 8,0mm(shank 6mm) 10, 0mm(shank 6mm) 12.0mm(shank 8mm) 16.0mm(shank 8mm) 20.0mm(shank 10mm) Sheet metal cassette

HSSE TiN Countersink HSSE Material: HSSE - Cobalt Stainless Steel, TiN = Titanium-Nitride Coating Angle: 90 ° (90st.) The set contains countersinks with diameters: 6,3mm (stopper 5mm) 8,3mm (stem 7mm) 10,4mm (stem 7mm) 12,4mm (stem 8mm) 16,5mm (stem 10mm) 20,5mm (10mm stopper) Plastic cassette

HSSE DIN335C Countersink HSSE Material: HSSE - Cobalt Admixture Steel Angle: 90 ° (90st. Stopper 4mm 5,0mm (Stopper 4mm) 6,0mm (Stopper 5mm) 6,3mm (Stopper 5mm) 7,0mm (Stopper 6mm) 8,0mm (Stopper 6mm) 8,3mm (stem 6mm) 10,0mm (stem 6mm 10,4mm (stem 6mm) 11,5mm (stem 8mm) 12,4mm (stem 8mm ) 15,0mm (10mm stem) 16,5mm (10mm stem) 19,0mm (stem 10mm) 20,5mm (stem 10mm) 23,0mm (stem 10mm ) 25,0mm (10mm stem) Plastic cassette

Set of countersinks with cylindrical shank and guide pin Application - for countersinking screws with cylindrical heads. Guide pin adapted to pre-drilled thread hole CSN 22 1604 / CSN 22 1604, DIN373 This set includes these countersinks (bolt - recess x pr guide pin): M3 - 6x2,5 M4 - 8x3,3 M5 - 10x4,2 M6 - 11x5 M8 - 15x6,8 M10 - 18x8,5