Countersinks

2bA… â „c. conical countersink for exchangeable inserts Number of pieces: 2(total for 4 exchangeable inserts) angle of insert: 90st. Maximum diameter: 45 mm Minimum diameter: 10.0 mm Clamping shank: 3/4 "(19.05mm) Total length: 72mm Material: tool steel carbide inserts Package contains: 1x countersunk head 4x insert 4x screw 1x torx key Application: Hard steels with tensile strength over 1000N / mm2 Gray cast iron over 240 HB Stainless steels with high chromium content(V2A / V4A) Acid-resistant steel Titanium and its alloys All other types of steels, cast iron and non-ferrous metals Where a long service life is required tools. Screw guide pins are purchased separately - see related products. with the wrong approach, the countersink can be damaged by vibrations and vibrations!

Set of 4 exchangeable inserts for VBD double countersink 20.1786.045 Karnasch

Set of 4 spare screws for VBD double countersink 20.1786.045 Karnasch | Thread size M3 | Total length 7mm Torx T9

Tvrdokovová 3bA… â „c. taper countersink with hole for interchangeable guide pins Number of pieces: 3 Angle of blade: 90st. Maximum diameter: 40 mm Minimum diameter: 10.0 mm Clamping shank: 3/4 "(19.05mm) Total length: 60mm Material: carbide Usage: Hard steels with tensile strength over 1000N / mm2 gray Cast iron over 240 HB High-chromium stainless steels(V2A / V4A) Acid-resistant steel Titanium and its alloys All other types of steels, cast iron and non-ferrous metals where a long tool life is required. Guide pins are purchased separately - see related products . Also for countersinking Without the middle pin, the centering is given by the geometry of the hole - even with a bad run, the countersink can be damaged by vibration and vibration! Features: Excellent chip removal, do not tip, the resulting surface without scratches, great centering of the tool- holes Countersink grooves are cut with a fine diamond wheel, thanks to which It is harder and smoother to run compared t o conventional countersinks where the grooves are milled.

Counter Shank Counter with M2 Thread for Countersunk Head Bolts (For Countersunk Bolts) Countersunk Head Countersinks for 90 ° Countersunk Head Screws in Standard Materials. D = 4,2 mm d1 = 1,5 mm d2 = 5 mm L = 60 mm I = 7 mm I1 = 6 mm < br> number of teeth = 4 Material: HSS ČSN 22 1621 / CSN 22 1621

Countersink Countershield M2.3 for Countersunk Head Bolts (Countersunk Bolts) Countersinks for 90 ° Countersunk Head Bolts in Standard Materials. D = 4,7 mm d1 = 1,8 mm d2 = 5 mm L = 60 mm I = 6 mm I1 = 7,5 mm number of teeth = 4 Material: HSS ČSN 22 1621 / CSN 22 1621

Home countersink with cylindrical shank and alignment pin for thread M2,6 for countersunk screws (countersunk screws) Application for boring holes for screws with countersunk head 90 ° in normal materials. D = 5.2 mm d1 = 2.05 mm d2 = 5 mm L = 60 mm I = 6.5 mm I1 = 7 , 5 mm number of teeth = 4 Material: HSS ČSN 22 1621 / CSN 22 1621

Counter Shank Counter with M3.5 Thread Counter for Countersunk Head Bolts (Countersunk Bolts) Countersunk Head Countersinks for 90 ° Countersunk Head Screws in Standard Materials. D = 6,7 mm d1 = 2,75 mm d2 = 7 mm L = 75 mm I = 9 mm I1 = 8 mm < br> number of teeth = 4 Material: HSS ČSN 22 1621 / CSN 22 1621

Taper Shank Counter with M22 Thread for Countersunk Head Bolts (for Countersunk Bolts) Countersink for 90 ° Countersunk Head Bolts in Standard Materials. D = 37,0 mm d1 = 23 mm d2 = morse 3 / MK3 number of teeth = 4 DIN standards now available in electronic format 22 1621 / CSN 22 1621/5542

Multi-bladed conical countersink Number of blades: 6 Blade angle: 120°. Maximum diameter: 13.3 mm Clamping shank: 10 mm Total length: 50 mm Material: HSS - High-speed steel ČSN 221627

Multi-faceted conical countersink 120°, unused standard, IIa quality Maximum diameter: 63 mm Blade angle: 120°. Number of blades: 9 Clamping shank: cone MK4 Total length: 185mm Material: HSS - High-speed steel ČSN 221628, IIa quality

Damaged multi-edge conical countersink 60° Maximum diameter: 45 mm ( due to damage at the end of the edge (from production) it can be used up to a diameter of approx. 35 mm) Blade angle: 60°. Number of blades: 8 Clamping shank: cone MK3 Total length: 180mm Material: HSS - High-speed steel ČSN 221628