Calipers
-
Analog calipers
-
Digital calipers
-
Dig. calibrated calipers
-
Inside groove calipers
-
Protract calipers
-
Milling cutter (3fl&5fl.) calipers
-
Digital measuring bars
-
Dentometers
-
Accessories
-
Special calipers
-
Digital caliper 150mm for measuring the diameters of incomplete circular parts
Digital caliper for measuring radii / diameters of incomplete circles / parts Measurement range: 0-150mm Splitting: 0,01mm Battery: 1,5V, type SR44 < The measured value is the radius of the measured part. The measured part must touch the scale arms - see attached photo! Data output RS 232 Also suitable for measurements in inaccessible places and wherever it is not possible to measure the diameter eg partially encapsulated parts.
In stock170,71 € with VAT -
Digital caliper 200mm for measuring the diameters of incomplete circular parts
Digital caliper for measuring radii / diameters of incomplete circles / parts Measurement range: 0-200mm Splitting: 0,01mm Battery: 1,5V, type SR44 < The measured value is the radius of the measured part. The measured part must touch the scale arms - see attached photo! Data output RS 232 Also suitable for measurements in inaccessible places and wherever it is not possible to measure the diameter eg partially encapsulated parts.
In stock195,63 € with VAT -
Digital tooth gauge 1-30 mm, Schut
Solid steel construction with carbide touch probes . The vertical slider sets the height from the top of the tooth to the top line. Then, the horizontal slider measures the thickness of the tooth in the top line. Fine building, locking - screw. Power 2 Batteries (V 357).
In stock252,09 € with VAT -
Analog caliper 160mm 0,02mm with screw locking, SOMET
Two-sided sliding gauge, slider, drawer. Measuring range 0-160 mm Splitting: 0,02mm Screw locking. CSN 251238 Can be measured in inches and millimeters. On the back of the thread drilling table. The slider comes in a classic Somet leatherette case
In stock33,66 € with VAT -
Analog caliper 160mm 0,05mm with screw locking, SOMET
Two-sided sliding gauge, slider, drawer. Measuring range 0-160 mm Splitting: 0,05mm Screw locking. CSN 251238 Can be measured in inches and millimeters. On the back of the thread drilling table. The slider comes in a classic Somet leatherette case
In stock31,97 € with VAT -
Digital caliper 200mm 0.01mm IP54, SOMET 14020465
Caliper 200 mm / caliper / drawer with depth gauge with data output 14020465KS Accuracy: 0.02 to 150mm; 0.03mm to 200mm Jaw height: 50mm Step 0.01mm Protection IP54: Protection against dust, protected against splashing water English manual included. Batteries: CR2032(3V) Each scale meets the accuracy according to DIN862 It is possible to display on this scale calibration protocol!
On request120,29 € with VAT -
Caliper for measuring three-edged cutters 5-40mm, Accurata
All-metal triangular sliding gauge for measuring three-pronged tools, especially milling cutters Scale is in inches and millimeters, resolution 0.05mm or 1/1000 inch Measuring range: 5-40 mm Material: stainless steel
In stock63,02 € with VAT -
Caliper for measuring five-edged cutters 2-40mm, Accurata
All-metal sliding gauge, five-sided, designed for measuring five-sided tools, especially milling cutters Scale is in inches and millimeters, resolution 0.05mm or 1/1000 inch Measurement range: 2-40 mm Material: Stainless
In stock59,33 € with VAT