Calipers
-
Analog calipers
-
Digital calipers
-
Dig. calibrated calipers
-
Inside groove calipers
-
Protract calipers
-
Milling cutter (3fl&5fl.) calipers
-
Digital measuring bars
-
Dentometers
-
Accessories
-
Special calipers
-
Analog caliper with flat depth gauge DIN862, Accurata
Slide gauge / slide / slider analog with depth gauge Scope: according to the selected variant Division: according to the selected variant Calibration: without calibration, unless otherwise stated Very smooth operation. Accuracy: meets DIN862, suitable for calibration Further information - see product description for individual variants
from 21,91 € with VAT -
Digital measuring horizontal scale
Digital position measurement, in the horizontal axis Moving range: according to the selected variant Possibility of measuring in inches and millimeters Resolution: 0.01mm Maximum measurement speed: 1.5m/s LCD display Battery 1.5v silver-oxide Option to set 0 At the ends, handles for attachment to the machine
from 45,83 € with VAT -
Analog sliding scale with flat depth gauge
Slide gauge / slide gauge / analog slider with depth gauge Scope: according to the selected variant Division: according to the selected variant Material: steel, unless otherwise stated Fine construction: according to the selected variant Further information - see product description for individual variants Supplied in a leather or plastic case
from 17,05 € with VAT -
Digitální posuvné měřítko ABS , Accurata
Recommended ✓Digital gauge / slider / slider with flat depth gauge and data output Scope: according to the selected variant Division: 0.01mm Battery: LR44 (1x included in the package) Data output: 5-pin Accuracy: 0.02mm up to 130mm / 0.03mm over 130mm / according to DIN862 Four buttons. Measurement with absolute zero. Extra fine slide, finely lapped slide bar. Czech instructions attached. Each of these scales is manufactured under a unique serial number. Each of these scales meets the accuracy of DIN862 It is possible to issue a calibration protocol for each of these scales. Each piece of this slide is additionally checked before shipping with a 22.50mm SOMET check gauge and a 37.001 Schmalkalden check ring directly at our store.
29,09 € with VAT -
Calibrated ABS digital caliper , Accurata
Calibrated digital gauge / slide / slide with flat depth gauge and data output Scope: according to the selected variant Division: 0.01mm Battery: LR44 (1x included in the package) Data output: 5-pin Accuracy: 0.02mm up to 130mm / 0.03mm over 130mm / according to DIN862 Four buttons. Measurement with absolute zero. Extra fine slide, finely lapped slide bar. Czech instructions attached. Each of these scales is manufactured under a unique serial number. Each of these scales meets the accuracy of DIN862 The calibration protocol is from an accredited calibration laboratory.
from 37,72 € with VAT -
Digital caliper with external top tips
Sliding gauge digital double-sided with fine adjustment, with upper tips for external measurement Scope: according to the selected variant Length of the lower jaws: according to the selected variant Division: 0.01mm Portability: according to DIN862 Possibility of internal measurement with lower jaws from a diameter of 20mm Possibility to set ABS absolute zero Switching to inches / millimeters The display remembers the value even after switching off.
from 287,24 € with VAT -
Analog scale with fine setting INOX, Accurata
Sliding gauge, slider, slider with fine adjustment Scope: according to the selected variant Length of the jaws: according to the selected variant Division: according to the selected variant Locking screws The slider enables internal measurement from 10mm Material: INOX - stainless steel Each slider has a serial number
from 186,49 € with VAT -
Analog sliding scale with fine adjustment and INOX upper tips, Accurata
Posuvné měřidlo , posuvka, šuplera mm s jemným stavěním a horními špičkami Rozsah : dle zvolené varianty Délka čelistí : dle zvolené varianty Dělení : dle zvolené varianty Aretace Šrouby Posuvka umožňuje vnitřní měření od 10mm Material: INOX - nerez Každá posuvka má seriové číslo
from 157,40 € with VAT -
Analog caliper with dial indicator
Double-sided caliper, slider, slide with dial indicator and depth gauge Scope: according to the selected variant Division: according to the selected variant Calibration : without calibration, unless otherwise stated Further information - see product description for individual variants
from 35,97 € with VAT