Inside groove calipers

Product count: 27

Order by:

Products per page:

1 2 3 Next page

Analog inside groove caliper , INOX

All-metal sliding gauge for internal recesses Measuring range: 10-160mm Other dimensions - see product description for individual variants Resolution: 0.05mm Screw locking Material: INOX - stainless steel

47,80 € with VAT

Choose variant
Digital inside groove caliper , Insize

Slide gauge for internal recesses, digital Measurement range: according to the selected variant Length of jaws: upper 30mm, lower 70mm Measuring tips upper: width 1.5mm x depth 3.5mm Measuring tips lower: width 2.5mm x depth 8.5mm Other dimensions - see the attached catalog sheet DIN 862

from 206,87 € with VAT

Choose variant
Analog inside groove caliper , KMITEX

All-metal sliding gauge for internal recesses Measurement range: according to the selected variant Other dimensions: see product description for individual variants Resolution: 0.02mm Screw locking Material: steel

from 49,23 € with VAT

Choose variant
Analog outside groove caliper , KMITEX

Analog slide / gauge for external grooves Measurement range: according to the selected variant Dimensions - see attached photo Resolution: 0.02mm Locking with a screw Material: steel

from 49,23 € with VAT

Choose variant
Digital inside groove caliper PROFESSIONAL , KMITEX

Digital slide gauge for internal recesses, PROFESSIONAL series Measurement range: according to the selected variant Other dimensions - see attached photos Division: 0.01mm Screw locking Material: steel With data output

from 125,37 € with VAT

Choose variant
Digital outside groove caliper PROFESSIONAL , KMITEX

Digital slide gauge for external grooves, PROFESSIONAL series Measurement range: according to the selected variant Other dimensions - see attached photos Division: 0.01mm Screw locking Material: steel With data output

from 125,37 € with VAT

Choose variant
Digital slide gauge ABS IP54 with replaceable tips , KMITEX

Professional calliper / slide / slide with depth gauge with data output with replaceable contacts Scope: according to the selected variant Division: 0.01mm Protection IP54 : Protection against dust, protected against splashing water Four buttons. Measurement with absolute zero. Extra fine movement, precisely ground sliding bar. Unlimited feed rate. Czech instructions attached. Battery : CR2032 (3V) Each of these scales meets the accuracy of DIN862 It is possible to issue a calibration protocol for each of these scales! A USB cable for connecting to a PC can be purchased with the scale (see attached photos), order code: 6040.9

from 104,02 € with VAT

Choose variant
Digital inside groove caliper , Schut

Digital slider for internal recesses Measurement range: according to the selected variant Other dimensions - see attached photos Resolution: 0.01mm Can be measured in millimeters and inches

from 153,90 € with VAT

Choose variant
Digital caliper 150mm for external recesses, recess 0.9mm, jaws 40mm, Schut

Slot for grooves, recesses For groove width from 0,9mm, Slot depth max. 5,2mm Jaw length: 40mm Resolution: 0,01mm Accuracy: 0.04mm After switching off, the slider does not read the values, respectively. after re-energizing, the value is always 0.00 mm

On request

90,04 € with VAT
Digital caliper for interchangeable styluses 1526-200, Insize

Digital universal slider, data output Possibility to measure in inches or millimeters. Measurement range: 24-224mm Material: stainless steel / INOX Automatic shut-off for longer inactivity Battery: CR2032 There are 3 sets of round interchangeable pushrods (see enclosed photo). Additional buttons 7321, 7381, 7391 and 7392 can be purchased for the slider - see attached photo, further stop at measurement at given depth 6143 additional touch - see enclosed catalog sheet

In stock

289,12 € with VAT
Touches for slider 1526-200, cat. No. 7392-T1

Touches to the slider

On request

18,67 € with VAT
Touches for slider 1526-200, cat. No. 7392-T2

Touches to the slider

On request

22,83 € with VAT