Calipers

Digital caliper for measuring radii / diameters of incomplete circles / parts Measurement range: 0-150mm Splitting: 0,01mm Battery: 1,5V, type SR44 < The measured value is the radius of the measured part. The measured part must touch the scale arms - see attached photo! Data output RS 232 Also suitable for measurements in inaccessible places and wherever it is not possible to measure the diameter eg partially encapsulated parts.

Digital caliper for measuring radii / diameters of incomplete circles / parts Measurement range: 0-200mm Splitting: 0,01mm Battery: 1,5V, type SR44 < The measured value is the radius of the measured part. The measured part must touch the scale arms - see attached photo! Data output RS 232 Also suitable for measurements in inaccessible places and wherever it is not possible to measure the diameter eg partially encapsulated parts.

Slot for internal grooves, recesses with 20-170mm range For groove width from 2,7mm, Slot depth max. 3,5mm Jaw length: 40mm Resolution 0,01mm < br> Plastic or wooden packaging.

Slot for internal grooves, recesses 20-170mm For groove width from 2,5mm, Slot depth max. 3,5mm Jaw length 60mm Resolution 0,01mm Plastic or wooden packaging.

Solid steel construction with carbide touch probes . The vertical slider sets the height from the top of the tooth to the top line. Then, the horizontal slider measures the thickness of the tooth in the top line. Fine building, locking - screw. Power 2 Batteries (V 357).

Two-sided sliding gauge, slider, drawer. Measuring range 0-160 mm Splitting: 0,02mm Screw locking. CSN 251238 Can be measured in inches and millimeters. On the back of the thread drilling table. The slider comes in a classic Somet leatherette case

Two-sided sliding gauge, slider, drawer. Measuring range 0-160 mm Splitting: 0,05mm Screw locking. CSN 251238 Can be measured in inches and millimeters. On the back of the thread drilling table. The slider comes in a classic Somet leatherette case

Digital sliding gauge with depth gauge and top tips, drawer, slider Possibility to measure in inches or millimeters. PC Output Absolute Zero Adjustment Using ABS / 0 Button Included in the delivery is Czech Instruction and Reserve Battery.

Caliper 200 mm / caliper / drawer with depth gauge with data output 14020465KS Accuracy: 0.02 to 150mm; 0.03mm to 200mm Jaw height: 50mm Step 0.01mm Protection IP54: Protection against dust, protected against splashing water English manual included. Batteries: CR2032(3V) Each scale meets the accuracy according to DIN862 It is possible to display on this scale calibration protocol!

Measurement range: 0-150mm Resolution: 0.01 mm Height of jaws: 30mm (measured from the ring clamp down) Round Diameter: 4mm Without Depth Gauge

All-metal triangular sliding gauge for measuring three-pronged tools, especially milling cutters Scale is in inches and millimeters, resolution 0.05mm or 1/1000 inch Measuring range: 5-40 mm Material: stainless steel

All-metal sliding gauge, five-sided, designed for measuring five-sided tools, especially milling cutters Scale is in inches and millimeters, resolution 0.05mm or 1/1000 inch Measurement range: 2-40 mm Material: Stainless