Calipers
-
Analog calipers
-
Digital calipers
-
Dig. calibrated calipers
-
Inside groove calipers
-
Protract calipers
-
Milling cutter (3fl&5fl.) calipers
-
Digital measuring bars
-
Dentometers
-
Accessories
-
Special calipers
-
Digital caliper 150mm 0.01mm ABS, Accurata - II. quality
Digital gauge 150 mm / slide / slide with depth gauge with data output Accuracy: 0.02mm on lower jaws, 0.04mm on upper jaws Division: 0.01mm Four buttons. Measurement with absolute zero. Extra fine slide, finely lapped slide bar. Czech instructions attached. Each of these scales is manufactured under a unique serial number. Each piece of this slider is additionally checked before shipping with a 22.50 mm SOMET check gauge and a 37.001 Schmalkalden check ring directly at our store. The slider is not suitable for calibration: The upper tips of the slider do not meet the accuracy of DIN862, or when checked in the calibration laboratory on the standard - a 4 mm ring, an inaccuracy of 0.04 mm was measured (the standard states 0.03 mm). This is a manufacturing defect, the upper tips are ground too flat (not to a point), and this defect cannot be removed. Larger diameters (from 5mm) measure the upper tips reliably with accuracy according to the DIN862 standard. The slider is of excellent quality, high-quality electronics, the values do not jump, the slider has a very smooth movement - lapped sliding bar. We recommend it for orientation control measurements, or for every garage - where calibration is not necessary.
In stock24,39 € with VAT -
Digital caliper 150mm for external recesses, recess 0.9mm, jaws 40mm, Schut
Slot for grooves, recesses For groove width from 0,9mm, Slot depth max. 5,2mm Jaw length: 40mm Resolution: 0,01mm Accuracy: 0.04mm After switching off, the slider does not read the values, respectively. after re-energizing, the value is always 0.00 mm
On request91,89 € with VAT -
Digital caliper 75mm, plastic
Caliper with top tips, drawer, slider Measuring range 0-76m, resolution 0.01mm, accuracy / - 0, 1mm Material: composite plastic Clear and well-readable display, included in the delivery is a battery From the back of the clip to capture the pocket emen apod.
On request8,00 € with VAT -
Digital caliper for interchangeable styluses 1526-200, Insize
Digital universal slider, data output Possibility to measure in inches or millimeters. Measurement range: 24-224mm Material: stainless steel / INOX Automatic shut-off for longer inactivity Battery: CR2032 There are 3 sets of round interchangeable pushrods (see enclosed photo). Additional buttons 7321, 7381, 7391 and 7392 can be purchased for the slider - see attached photo, further stop at measurement at given depth 6143 additional touch - see enclosed catalog sheet
In stock295,08 € with VAT -
USB cable for connecting digital scales 1108 to PC 7302-SPC5A, Insize
No software required after connection. After pressing the button on the cable, the value is transferred to the CAD program, Excel, Word, text file, etc. With this cable you connect these meters Insize: Series 1108 Calipers Depth Gauges
In stock79,63 € with VAT