Calipers
-
Analog calipers
-
Digital calipers
-
Dig. calibrated calipers
-
Inside groove calipers
-
Protract calipers
-
Milling cutter (3fl&5fl.) calipers
-
Digital measuring bars
-
Dentometers
-
Accessories
-
Special calipers
-
Digital slide gauge ABS IP54 with replaceable tips , KMITEX
Professional calliper / slide / slide with depth gauge with data output with replaceable contacts Scope: according to the selected variant Division: 0.01mm Protection IP54 : Protection against dust, protected against splashing water Four buttons. Measurement with absolute zero. Extra fine movement, precisely ground sliding bar. Unlimited feed rate. Czech instructions attached. Battery : CR2032 (3V) Each of these scales meets the accuracy of DIN862 It is possible to issue a calibration protocol for each of these scales! A USB cable for connecting to a PC can be purchased with the scale (see attached photos), order code: 6040.9
from 106,17 € with VAT -
Digital caliper for measuring pipe walls ABS PROFESIONAL, KMITEX
Slide gauge for pipes - for measuring pipe thickness Measurement range: according to the selected variant Resolution: 0.01 mm Height of the jaws: 30mm (measured from the circular touch clamp down) ABS function With data output Without depth gauge
from 136,95 € with VAT -
Digital caliper, extra large display, Schut
Recommended ✓Digital gauge / slider / slider with flat depth gauge Scope: according to the selected variant ABS function (yes/no): depending on the selected variant Division: 0.01mm Accuracy: 0.02mm up to 130mm, 0.03mm over 130mm Extra large numbers: 12mm Glass scale - very easy scrolling = contactless movement Automatic shutdown On/off function, mm/inch switching DIN 862 Cable for data output is not part of the package - can be purchased additionally - order no. 909.448
from 68,38 € with VAT -
Digital sliding gauge with fine adjustment ABS, Schut
Single-sided digital sliding gauge, without upper jaws, with ABS function Scope: according to the selected variant Length of the lower jaws: according to the selected variant Division: 0.01mm Switching inches / millimeters Possibility of setting absolute zero, ABS function The display remembers the value even after switching off.
from 384,67 € with VAT -
Digital caliper with fine adjustment and upper jaws, Schut
Digital sliding gauge with upper tips with ABS function Scope: according to the selected variant Length of the lower jaws: according to the selected variant Internal measurement from a diameter of 20mm Switching inches / millimeters Possibility of setting absolute zero, ABS function The display remembers the value even after switching off.
from 384,67 € with VAT -
Digital caliper with external top tips, Schut
Sliding gauge digital double-sided with fine adjustment, with upper tips for external measurement Scope: according to the selected variant Length of the lower jaws: according to the selected variant Resolution: 0.01mm Possibility of internal measurement with lower jaws from a diameter of 20mm Possibility to set ABS absolute zero Switching to inches / millimeters The display remembers the value even after switching off.
from 438,83 € with VAT