Calipers

Analog drawing slide with locking screw / marking pin, type T Scope: according to the selected variant Resolution 0.05mm

Slide gauge for internal recesses, digital Measurement range: according to the selected variant Length of jaws: upper 30mm, lower 70mm Measuring tips upper: width 1.5mm x depth 3.5mm Measuring tips lower: width 2.5mm x depth 8.5mm Other dimensions - see the attached catalog sheet DIN 862

Digital measurement of the position in the horizontal axis / measuring bar Moving range: according to the selected variant Resolution: 0.01mm Further info - see the attached catalog sheet Possibility of measuring in inches and millimeters Maximum measurement speed: 1.5m/s LCD display Battery 1.5V silver-oxide At the ends, handles for attachment to the machine

Digital measurement of the position in the vertical axis / measuring bar Moving range: according to the selected variant Resolution: 0.01mm Further info - see the attached catalog sheet Possibility of measuring in inches and millimeters Maximum measurement speed: 1.5m/s LCD display Battery: LR44 At the ends, handles for attachment to the machine

Digital gauge / slider / slider with depth gauge with data output Scope: according to the selected variant Metal scroll wheel: yes, unless otherwise stated Division: 0.01mm Accuracy: 0.02mm up to 130mm, 0.03mm over 130mm Suitable for machine production. Tip: on/off, zero, mm/inch Automatic shutdown during prolonged inactivity Battery with long life - type CR2032 With data output With scroll wheel at the scale Material: stainless steel / INOX

Double-sided caliper, slider, slide with dial indicator and depth gauge Scope: according to the selected variant Division: according to the selected variant Slide wheel/roller: without wheel, unless otherwise stated For more information - see the attached catalog sheet Material: stainless steel

Digital position measurement, in the horizontal axis - digital displacement / measuring bar Moving range: according to the selected variant Possibility of measuring in inches and millimeters Resolution: 0.01mm Maximum measurement speed: 1.5m/s LCD display Battery 1.5v silver-oxide Option to set 0 At the ends, handles for attachment to the machine

Digital position measurement, in the vertical axis - digital displacement / measuring bar Moving range: according to the selected variant Possibility of measuring in inches and millimeters Resolution: 0.01mm Maximum measurement speed: 1.5m/s LCD display Battery 1.5v silver-oxide Option to set 0 Press the plus (up arrow) or minus (down arrow) buttons to change the value on the display At the ends, handles for attachment to the machine

Professional calliper / slider / slider with flat depth gauge and data output Scope: according to the selected variant Division: 0.01mm Accuracy: 0.02mm up to 130mm, 0.03mm over 130mm Protection IP54 : Protection against dust, protected against splashing water Four buttons. Measurement with absolute zero. Extra fine movement, precisely ground sliding bar. Unlimited feed rate. Czech instructions attached. Battery : CR2032 (3V) Each of these scales meets the accuracy of DIN862 It is possible to issue a calibration protocol for each of these scales! A USB cable for connecting to a PC can be purchased with the scale (see attached photos), order code: 6040.9

Double-sided sliding gauge, slider, slide. Measuring range: according to the selected variant Division: according to the selected variant Calibration : without calibration, unless otherwise stated Locking with a screw ČSN 251238 Basic series, accuracy up to 0.03mm, relatively smooth operation, unfortunately the design is more of a hobby slider.

Digital caliper, professional quality, with large display, depth gauge and bluetooth Scope: according to the selected variant Division: 0.01mm Accuracy: 0.02mm up to 130mm, 0.03mm over 130mm They also contain functions: ZERO, ABS, mm/inch switching, locking-screw. Each caliper of this model has a serial number Bluetooth connection : There is no need to purchase any additional data cable or software. Just pair the meter with the PC via Bluetooth, after pressing the button on the meter, the value will be transferred to the PC. For the correct function of the transfer, it is necessary to have the English keyboard switched on the PC.

Sliding gauge / slide gauge / analog slider monoblock, with fine displacement and depth gauge Scope: according to the selected variant Length of the jaws: according to the selected variant Division: according to the selected variant Upper tips: according to the selected variant Material: INOX / stainless steel