Air tools

Spare Saw Blade for Pneumatic Reciprocating Saw ZN-1033 Overall Length 94mm, Width 12,6mm / 5,5mm Thickness: 0,8mm

Vibrating pneumatic grinder The size of the grinding plate holder is 90x165mm. Load paper with "pin". Inlet thread is 1/4 "G. No-load speed 8.000 rpm Air consumption approx. 360 l / min (6 CFM) Operating pressure 6.3 Bar Recommended hose width 9.5mm

Direct pneumatic polisher elongated Polisher pneumatic with 6mm collet for clamping polishing discs 3mm collet can be purchased Overall length 216mm Neck length 51mm, nut diameter 21mm Body diameter of grinder 40mm < Minimum Hose 9.5mm Air Consumption: 115 l / min. No-load speed 4.000 rpm. All-metal body. Supplied with 1/4 "G male threaded spindle and spanner for quick coupling The illustrated felt disc on the stem is not included in the scope of delivery but can also be purchased at our e-shop.

ZR-1 lubricating pneumatic press comes with 2 terminals. May be used for fat free in cartridges. When the compressed air is connected, the operating pressure is 2-10 Atp Hydraulic gear 80-200 Atp

Lubricating press for manual and pneumatic control. The package includes a mechanical and pneumatic pump, a rigid and flexible attachment with 2 quick couplings heads. You can use both cartouche and fat for free. When compressed air is connected, the operating pressure is 2-10 Atp. Hydraulic transmission 80-200 Atp. The design of the tube allows both cartridges and fill grease to be used as a cartridge. After filling and releasing the push-button, press the air valve to air the system and prepare for pressure lubrication. Thread for hoses: NPT 1/8 "

ZR-Z2 extension set for hand and pneumatic lubrication presses - end caps for wide use

Sandblasting pistols, pneumatic Metal pistol Aluminum bottom vessel Supplied with accessories: 4x rubber nozzle (nozzle), waste bag, sandbox. Gun Thread: 1/4 "G Operating Pressure 4-8 bar (atm) Maximum Pressure 10 bar (atm) Air Consumption: 250-350l / min

Spare nozzle for MINI HVLP spray gun with upper container Nozzle diameter 1.0 mm Total needle length x Dimensions of individual needle parts see.2. obrázek Designed for pistol type H-2000A

Spare nozzle for large HVLP spray gun with upper container Nozzle diameter 2.0 mm Total needle length x Dimensions of individual needle parts see.2. picture

High quality spraying varnishing low pressure HVLP pistol with three control elements. Nozzle: 1.4mm > Air consumption: 170-300 l / min Nozzles 2.0 and 2.5mm (on fillers) color, key and brush

High Pressure Spray Gun with Bottom Bottle Aluminum Bottom Bottle Nozzle mm Working Pressure 2.5 - 4.5 Kgf / cm2 Bottle Capacity Approx. 500ml (0.5l) 1/4 "G Color and Pressure Control Horizontal & Vertical Color Spray Control Double Action Gun (Two-Stage Trigger) = Only Air or Air Release & Colors Package Included / nozzle dismantling, 1/4 "male threaded spindle, cleaning brush

Small varnishing gun with upper plastic container for painting small parts. MINI HVLP Pistol is fitted with a 0.8mm stainless steel nozzle (available to buy 1.0mm) More than 75% transmission efficiency with less than 10% pressure drop Air consumption 2.7 - 68 m3 / h