VERTEX

Morse clamping tip - for wood, plastic, etc. Diameter of the driving part: according to the selected variant Other dimensions - see descriptions of individual variants To clamp the workpiece between the centers, it is clamped to the lathe spindle directly or via a reduction sleeve. A rotating tip is suitable for the tailstock quill. Before clamping the workpiece, it is necessary to first drill centering holes in the workpiece. Body and tip are made of SLD steel, HRC 62 °

Clamping block stepped / triangular supports for stepped clamping Clamping bridge Other dimensions: see the attached catalog sheet A (depth): according to the selected variant B (height): according to the selected variant C (support width): according to the selected variant Hardness: 37 HRC

Adjustable dolly with counter nut, for adapters - exchangeable tips Adjustable height: according to the selected variant Interchangeable adapters - optional: according to the selected variant Other dimensions - see the attached catalog sheet Clamping diameter for exchangeable attachments: 11.5mm Support to ensure the position/stiffness of workpiece clamping. By unscrewing the upper part of the support, it is secured in the specified position with a locking nut. Replaceable tips can be purchased additionally - see related products (last photo)

Clamping cone: according to the selected variant Fine adjustment of the bore diameter (nonius) Boring range: 10-100mm Head diameter: 50mm Clamping holes for knives: 12mm Division: 0.01mm Nonius: 1 turn = 0.5mm Maximum extension - offset: 15mm Distance between front holes: 15mm Total height: 60mm Front circling: max dia. 70mm Side circling: min dia. 55mm

Automatic boring head - with autofeed Clamping cone: according to the selected variant Boring range: 5 - 250mm Max. displacement: +-15mm Clamping diameter of knives: 18mm Transition scale: 0.005mm Max. feed / turn: 3mm Automatic shift / rotation: 0.02; 0.04; 0.06 mm Inserts for knives: 10mm, 12mm Radeco knife: 6x6x30mm Dimensions: 85x45x80 mm

Stable clamping jaws / free machine jaws / split vice (2 pcs), light design Width of the jaws: according to the selected variant Other dimensions - see attached catalog sheet or product description for individual variants

Stable clamping jaws / free machine jaws / split vice (2 pcs), compared to the FV type, it is a more massive design Width of the jaws: according to the selected variant Other dimensions - see attached catalog sheet or product description for individual variants

Reversible tapping head / reversing tap Clamping range: according to the selected variant Clamping shank (morse taper): according to the selected variant Other dimensions - see the description for each variant Type K1 is with a drill chuck, types K2, K3 and K4 are with clamping behind the stones After cutting the set depth, the speed will change The tap is without a torque coupling, ie it does not protect the tap from bending. Instructions for use - see attached PDF

Quality rotary dividing table - dividing table for milling machine - circular table for three-jaw chuck Horizontal and vertical clamping Diameter of the table: according to the selected variant There is a scale of 360° around the circumference of the turntable Other dimensions - see product description for individual variants, or the attached catalog sheet Nonius : 1 turn = turn by 4° 1 division = 1´ (one minute of degree) Maximum resolution: 20´´ (20 seconds) The turntable and vernier can be locked in the selected position. The lower landing surface is ground, equipped for storing centering stones. Vertex table grooves are suitable for clamping 3-jaw chucks, which is ideal for machining rotary parts. In the same way, four-jaw chucks can be easily clamped, which are suitable for machining squares and polygons (which is less common), but at the same time, they have lower accuracy (centering) when machining rotary parts - precisely because of clamping by 4 jaws. For this reason, we recommend always using a 3-jaw chuck - if possible. On the market, you can find similar less precise tables with four grooves, but these are not ideal for clamping 3-jaw and 4-jaw chucks - clamping a chuck that has 3 clamping holes on 4 grooves is complicated - it is necessary to find / make an intermediate flange.

Rectangular angle plate with T grooves for clamping Dimensions of the plate: according to the selected variant T-slot: according to the selected variant The plate is used for precise clamping / angling of the object during machining, outlining, etc. Material: High-strength cast iron Grinded functional surfaces with flatness up to 0.02mm / 300mm Flatness of the bearing surface up to 0.01mm / 300mm

Professional massive cast iron rotary circular dividing table - dividing table with chuck for milling machine Possibility of dividing continuously via the screw and vernier, after its disconnection (lever) it is also possible to divide with automatic locking by 15° (24 positions) Diameter of the chuck: according to the selected variant The chuck is rotatable by 360° Other dimensions - see the attached PDF catalog sheet or product description for individual variants There are no additional jaws for the chuck. The package also includes discs for dividing into 2, 3, 4, 6, 8 and 12 positions (or 180°, 120°, 90°, 60°, 45°, 30°) Quick setup, simple operation. Nonius : 1 turn = turn by 4° 1 division = 1´ (one minute of degree) Maximum resolution: 20´´ (20 seconds) The turntable and vernier can be locked in the selected position. The lower landing surface is ground, equipped for storing centering stones.

Rotary dividing table tilting under the milling machine Turntable diameter: according to the selected variant Other dimensions - see product description for individual variants, or the attached catalog sheet Horizontal fixing with the possibility of inclination 0-90°. Scale: 360° The lower landing surface is ground, equipped for storing centering stones. Precise positioning (shooting) with a control wheel with vernier - fine division. It is possible to purchase dividing discs with a ruler. The turntable and vernier can be locked in the selected position. It is fastened to the worktop with the attached clamps (4 pcs).