VERTEX

Dividing device - the dividing device is suitable for use with a column drill or a milling machine Chuck size: according to the selected variant Other dimensions - see attached catalog sheet or product description for individual variants With a flat lever, it is possible to divide with a lock of 15° The table is locked in a given position with a round lever.

Reversible tapping head / reversing tap Clamping range: according to the selected variant Clamping shank (cylindrical): according to the selected variant Other dimensions - see the description for each variant Type K1 is with a drill chuck, types K2, K3 and K4 are with clamping behind the stones After cutting the set depth, the speed will change The tap is without a torque coupling, ie it does not protect the tap from bending. Instructions for use - see attached PDF

Set of professional interchangeable tips Clamping morse taper: according to the selected variant Individual content of the set and other parameters - see the description for each variant Material: tool steel - designation according to DIN: 25CrMo4, hardened, ground The set is delivered in a wooden or plastic box

Special collet for clamping taps into a VTA reverse tap with torque coupling Clamping range of the collet: see label for individual variants Diameter and other dimensions: see label for individual variants To two collets fit each Vertex VTA thread cutter: VTA7-JT6 thread cutter: FC-10 (2.5-4.5mm) and FC-11 (4.5-6.5mm) collets Tap cutter VTA12-JT6 : collet FC-20 (4.0-7.0mm) and FC-21 (7.5-10.0mm) Tap cutter VTA20-M20 : collet FC-30 (8.0 -12.0mm) and FC-31 (14.0-19.0mm)

Additional dividing device (dividing discs) serves for convenient and precise angular division For rotary tables and dividers marked: according to the selected variant More information - see product description for individual variants Precise setting of the selected step using a knife ruler and locking pin.

Simple tailstock for lathe, divider The axis of the tip can be adjusted in the height range: according to the selected variant Other dimensions - see product description for individual variants Possibility of setting the angle of inclination of the tip: -30 to +30°

Quick-clamping tapping head with length compensation for bits for machine taps according to DIN371 DIN374 and DIN376 Clamping range of the tap: according to the selected variant Clamping shank: according to the selected variant The torque coupling is set directly on the attachment. Tap clamping method: Taps are clamped in extensions, which need to be purchased separately. The taps are secured in the extension with a square and a clamping shank. The tap is held firmly in the extension, pulled out after pressing the clamping collar. The extensions are secured in the head over a bearing and stones. In addition to the tapping head, it is also possible to purchase additional attachments for taps manufactured in accordance with JIS and ISO 529 standards, which are not common in our country. Approximately 90% of the domestic market consists of taps manufactured according to DIN371,374,376 standards Clamping tongs TC-312 / TC-820 / TC-1433 are not part of the tap - they need to be purchased separately! Usage: The tap is clamped in a suitable attachment, which has a torque coupling already preset, or it can be fine-tuned as needed.

3-jaw tap chuck Clamping (inner B cone or outer morse taper): according to the selected variant Number of jaws: 3 + square clamping Other dimensions - see description for individual variants Tightens by turning the threaded head in which there are three jaws, then the enclosed Allen key and two internal stop jaws for attaching the square shank of the tap.

Quick-clamping tapping head without length compensation for attachments for machine taps according to DIN371 DIN374 and DIN376 Clamping range of the tap: according to the selected variant Clamping shank: according to the selected variant This type (SF) is without length compensation! The torque coupling is set directly on the attachment. Tap clamping method: Taps are clamped in extensions, which need to be purchased separately. The taps are secured in the extension with a square and a clamping shank. The tap is held firmly in the extension, pulled out after pressing the clamping collar. The extensions are secured in the head over a bearing and stones. In addition to the tapping head, it is also possible to purchase additional attachments for taps manufactured in accordance with JIS and ISO 529 standards, which are not common in our country. Approximately 90% of the domestic market consists of taps manufactured according to DIN371,374,376 standards Clamping tongs TC-312 / TC-820 / TC-1433 are not part of the tap - they need to be purchased separately! Usage: The tap is clamped in a suitable attachment, which has a torque coupling already preset, or it can be fine-tuned as needed.

Set of clamps for SPW milling machine For T-slot: according to the selected variant Threaded screws and nuts in the set have a thread: according to the selected variant With a practical stand Metric threads The set includes: * Exact lengths and dimensions can be found in the product description for individual variants 24 pcs of bolts 6 pcs of T-nuts 4 pcs of connecting nuts (muffs) 6 pcs of nuts with hexagonal head 3 pairs of clamps 12 pcs of bridges (steps) Package color may vary.

Quick-clamping tapping head with length compensation for bits for machine taps according to DIN371 DIN374 and DIN376 Clamping range of the tap: according to the selected variant Clamping shank (cylindrical): according to the selected variant Clamping shank length: see description for variant The torque coupling is set directly on the attachment. Tap clamping method: Taps are clamped in extensions, which need to be purchased separately. The taps are secured in the extension with a square and a clamping shank. The tap is held firmly in the extension, pulled out after pressing the clamping collar. The extensions are secured in the head over a bearing and stones. In addition to the tapping head, it is also possible to purchase additional attachments for taps manufactured in accordance with JIS and ISO 529 standards, which are not common in our country. Approximately 90% of the domestic market consists of taps manufactured according to DIN371,374,376 standards Clamping tongs TC-312 / TC-820 / TC-1433 are not part of the tap - they need to be purchased separately! Usage: The tap is clamped in a suitable attachment, which has a torque coupling already preset, or it can be fine-tuned as needed.

Set of 4 clamps for a milling machine with a spring, for clamping low parts of smaller dimensions Clamps are suitable for T-slot: depending on the selected variant Other dimensions - see attached catalog sheet or product description for individual variants One side of the clamp has a surface that is pressed onto the clamped object, on the other side there are teeth for locking into the support bridge. Usage : Clamps are inserted into the T groove of the work table. The clamped object is placed between the clamps. By tightening the expansion screw, the clamp is secured against displacement in the groove. By subsequently tightening the screw that controls the hinged thumb, the clamped object is pulled/pressed. The advantage of these clamps is that they do not interfere with the machining tool - they do not protrude above the clamped object. Clamps are not suitable for clamping large parts (1000x500mm, etc.) with a large weight! Clamps are suitable for light milling or grinding / EDM machines.