Pilsen Tools (Škoda)

Morse swivel tip Morse taper: according to the selected variant Other dimensions and parameters - see product description for individual variants Top angle: 60 ° Standard: ČSN 24 3324 The tip has two classic + one needle bearing. The tip can be lubricated from the back of the screw or directly into the bearing - via the housing - by loosening the screw. The tip can also be dismantled - two grooves are used for this - see photo.

Morse swivel tip Morse taper: according to the selected variant Other dimensions and parameters - see product description for individual variants Top angle: 90 ° Standard: ČSN 24 3324 The tip has two classic + one needle bearing. The tip can be lubricated from the back of the screw or directly into the bearing - via the housing - by loosening the screw. The tip can also be dismantled - two grooves are used for this - see photo.

The ŠKODA rotary chuck with extended tip (standard 24 3327) is intended for clamping workpieces on NC lathes. Morse taper: according to the selected variant Other dimensions and parameters - see the enclosed catalog sheet Standard: ČSN 24 3327 The narrow clamping part of the tip allows easy access of the tool to the workpiece, which is especially advantageous when machining shaped parts. The tip design allows the clearance in the front radial bearing to be adjusted. Swivel tips are equipped with a shank with a MORSE taper according to ČSN 22 0420 (DIN 228, ISO 296) without a clamping thread. Swivel tips are manufactured in an innovative maintenance-free design lubricated with lithium grease LV 2-3. The innovative design of the tips allows customers to service the product without service throughout its life. Disassembly of the rotating tips is not recommended.

Swivel chuck is designed for work on lathes. Morse taper: according to the selected variant Other dimensions and parameters - see the enclosed catalog sheet Standard: ČSN 24 3328 Their extended clamping part allows easy access of the tool to the workpiece, which is especially advantageous when machining tools with exchangeable inserts and when working on copying lathes. The design of the tips allows the radial clearance to be adjusted. The tips have a MORSE ČSN 22 0420 clamping shank (DIN 228, ISO 296) without a clamping thread. Swivel tips are supplied lubricated with lithium grease LV 2-3. It is recommended to relubricate tips used in extreme conditions at intervals of 300 operating hours in quantities up to 1 g through the hole in the housing head (blinded by screw S1) and up to 0.5 g through the hole at the end of the taper shank (blinded by screw S2). Disassembly of the rotating tips is not recommended.

Morse swivel tip for clamping heavy workpieces Morse taper: according to the selected variant Other dimensions and parameters - see description for individual variants Top angle: 60 ° Standard: ČSN 24 3325 Type N: Throw 0.04mm Type E: Throw 0.01mm

Morse swivel tip for clamping heavy workpieces Morse taper: according to the selected variant Other dimensions and parameters - see description for individual variants Top angle: 90 ° Standard: ČSN 24 3325 Type N: Throw 0.04mm Type E: Throw 0.01mm

Rotating tip for exchangeable attachments / without exchangeable inserts Morse cone: according to the selected variant Throwability: 0.010 mm Other dimensions - see product description for individual variants Standard: ČSN 243326M / 243326.9 M The packaging does not include attachments, these are purchased separately - see the attached photo.

Replacement tip for Škoda MK2 rotary tip ČSN 243324 Diameter of the tip Dmax: 20mm Diameter of the ground cylindrical part: mm Total length: mm Suitable for Škoda tips with a silver case - for Silver-line type ČSN 243324M.

Replacement tip for Škoda MK3 rotary tip ČSN 243324 Diameter of the tip Dmax: 28mm Diameter of the ground cylindrical part: mm Total length: mm Suitable for Škoda tips with a silver case - for Silver-line type ČSN 243324M.

Replacement tip for Škoda MK3 swivel tip ČSN 243324 Diameter of the tip Dmax: 30mm Diameter of the ground cylindrical part: 25mm Diameter for the thrust bearing: 15mm Diameter for the rear bearing: 5mm Total length: 153mm Suitable for older Škoda tips with a black case. Not suitable for Silver-line ( type ČSN 243324M).

Replacement tip for Škoda MK4 swivel tip ČSN 243324 Diameter of the tip Dmax: 35mm Diameter of the ground cylindrical part: 30mm Diameter for the thrust bearing: 20mm Diameter for the rear bearing: 8mm Total length: 193mm Suitable for older Škoda tips with a black case. Not suitable for the Silver-line ( series, type ČSN 243324M).

Replacement tip for swivel tip A… code MK4 A „A’SN 243324