PFERD

Application for matting and satining of ferrous and non-ferrous metals, cleaning of oxidized non-ferrous metals, matting of stainless steel, roughening of plastics as a preparation for bonding. PLN grinding body Diameter 50mm ; abrasive height 30mm; Stopper 6mm (50 x 30 x 6 mm) Grain 280 Korund C Optimum working speed 3.600-7.500 rpm. Stop grinding bodies consist of a nylon fleece covered with abrasive grain (Silicon Carbide). - Granularity 280 - The open structure of the material lends elasticity to the tools and takes care of the cold cut. The great adaptability of the web makes sure there are no changes in surface geometry. The optimal circumferential speed for bodies with abrasive fleece is 10-20 m / sec.

Application for matting and satining of ferrous and non-ferrous metals, cleaning of oxidized non-ferrous metals, matting of stainless steels, roughening of plastics as a preparation for bonding. PLN grinding body Diameter 60mm ; abrasive height 50mm; 6mm shank (60 x 50 x 6 mm) Grain 180 Korund C Optimal working speed 3.200-6.500 rpm. Stop grinding bodies consist of a nylon fleece covered with abrasive grain (Silicon Carbide). - granularity 180 - The open structure of the material lends elasticity to the tools and takes care of the cold cut. The great adaptability of the web makes sure there are no changes in surface geometry. The optimal circumferential speed for bodies with abrasive fleece is 10-20 m / sec.

Application for matting and satining of ferrous and non-ferrous metals, cleaning of oxidized non-ferrous metals, matting of stainless steels, roughening of plastics as a preparation for bonding. PLN grinding body Diameter 60mm ; abrasive height 50mm; 6mm shank (60 x 50 x 6 mm) Grain 280 Korund C Optimum working speed 3.200-6.500 rpm. Stop grinding bodies consist of a nylon fleece covered with abrasive grain (Silicon Carbide). - Granularity 280 - The open structure of the material lends elasticity to the tools and takes care of the cold cut. The great adaptability of the web makes sure there are no changes in surface geometry. The optimal circumferential speed for bodies with abrasive fleece is 10-20 m / sec.

Application for matting and satining of ferrous and non-ferrous metals, cleaning of oxidized non-ferrous metals, matting of stainless steels, roughening of plastics as a preparation for bonding. PLN grinding body Diameter 40mm ; abrasive height 20mm; Stopper 6mm (40 x 20 x 6 mm) Grain 100 Corund A Optimum operating speed 3.200-6.500 rpm. , max. 7,500 rpm. Abrasive blades on the mat are fan-shaped, radially around the tool axis. Between the lamellae is the abrasive cloth. The result is a higher material removal and a thicker appearance of the cut. The open structure of the material lends elasticity to the tools and takes care of the cold cut. The great adaptability of the web makes sure there are no changes in surface geometry. The optimal circumferential speed for bodies with abrasive fleece is 10-20 m / sec.

Application for matting and satining of ferrous and non-ferrous metals, cleaning of oxidized non-ferrous metals, matting of stainless steels, roughening of plastics as a preparation for bonding. PLN grinding body Diameter 40mm ; abrasive height 20mm; Stopper 6mm (40 x 20 x 6 mm) Grain 180 Korund A Optimum operating speed 3.200-6.500 rpm. , max. 7,500 rpm. Abrasive blades on the mat are fan-shaped, radially around the tool axis. Between the lamellae is the abrasive cloth. The result is a higher material removal and a thicker appearance of the cut. The open structure of the material lends elasticity to the tools and takes care of the cold cut. The great adaptability of the web makes sure there are no changes in surface geometry. The optimal circumferential speed for bodies with abrasive fleece is 10-20 m / sec.

Application for matting and satining of ferrous and non-ferrous metals, cleaning of oxidized non-ferrous metals, matting of stainless steel, roughening of plastics as a preparation for bonding. PLN grinding body Diameter 50mm ; abrasive height 30mm; Stopper 6mm (50 x 30 x 6 mm) Grain 100 Korund A Optimum working speed 3.200-5.000 rpm. , max. 6,000 rpm. Abrasive blades on the mat are fan-shaped, radially around the tool axis. Between the lamellae is the abrasive cloth. The result is a higher material removal and a thicker appearance of the cut. The open structure of the material lends elasticity to the tools and takes care of the cold cut. The great adaptability of the web makes sure there are no changes in surface geometry. The optimal circumferential speed for bodies with abrasive fleece is 10-20 m / sec.

Application for matting and satining of ferrous and non-ferrous metals, cleaning of oxidized non-ferrous metals, matting of stainless steel, roughening of plastics as a preparation for bonding. PLN grinding body Diameter 50mm ; abrasive height 30mm; Stopper 6mm (50 x 30 x 6 mm) Grain 180 Korund A Optimum operating speed 3.200-6.500 rpm. , max. 7,500 rpm. Abrasive blades on the mat are fan-shaped, radially around the tool axis. Between the lamellae is the abrasive cloth. The result is a higher material removal and a thicker appearance of the cut. The open structure of the material lends elasticity to the tools and takes care of the cold cut. The great adaptability of the web makes sure there are no changes in surface geometry. The optimal circumferential speed for bodies with abrasive fleece is 10-20 m / sec.