Compressed air treatment
-
Pressure regulators
-
Regulators with separator
-
The rule. with separator and admixture.
-
Water / oil / dirt separators
-
Lubricants
-
Gas reducing valves
-
Separator - 1/4 "G sludge trap with filter and container cover, nipple
Water separator, oil and dirt from the air system The separator body is made of high alloy casting, the dehumidifier vessel is equipped with a protective cover and a hose nozzle for condensate drain The separator is fitted with two threads 1 / 4 "G Maximum Working Pressure: 1 Mpa Capacity of the Separator Tank: 45cm3 Separator Dimensions: 165x70mm
In stock10,22 € with VAT -
Replacement capillary with valve for CO2 reduction valve
Replacement Capillary Pressure Indicator for CO2 Reduction Valves Range 0-25 Mpa Diameter Outside Thread: 13.8mm Flow Rate: 0 to 25 l / min - By Ball in Capillary Thread under capillary: M12x1,0 Nipple under capillary: 8mm
In stock14,08 € with VAT -
Air pressure regulator 1/4 "G with sludge trap - separator and lubricator ZC2000-02
Clearance saleCombined set - air pressure regulator (reducing valve) with blower (separator) and lubricator. This controller is fitted with two 1/4 "G threads. The alarm clock has a range of 10bar / 150PSI. Maximum operating pressure 9,9kgf / cm3 (9,7bar) 8.5 kgf / cm3 (0-10bar / 0-150 PSI). Recommended oil in the lubricator: Velocite 6 Do not use cutting and bearing oil
On request24,02 € with VAT -
Air pressure regulator 1/2 "G with sludge trap - separator and lubricator ZC4000-04
Combined Set - Air Pressure Regulator - Reduction Valve with Drain / Separator and Latch. This controller is fitted with two 1/2 "G threads Alarm clock has a range of 10bar / 150PSI Maximum working pressure: 9.7bar Control: 0.5-10bar / 0-150 PSI Dimensions: 240x180mm Lubricant oil: Velocite 6 Do not use cutting and bearing oil
In stock43,00 € with VAT -
Air pressure regulator with sludge trap - separator and lubricator 3/4 "G - ZC5010-06
Combined set - air pressure regulator (reducing valve) with blower (separator) and lubricator. This controller is fitted with two 3/4 "G threads Alarm clock has a range of 10bar / 150PSI Maximum working pressure: 9.7bar Control: 0.5-10bar / 7-150 PSI Max Flow: 5000l / min Material: Polycarbonate Dimensions: 350x200mm Recommended oil in the lubricator: Velocite 6 Cutting and bearing oil DO NOT USE !!!
In stock91,00 € with VAT -
Separator - 1/4 "G sludge trap with filter, nipple
Water separator, oil and dirt from the air system The separator is fitted with two 1/4 "G threads The separator body is made of high-quality alloy casting, a hose nozzle for condensate drain Maximum working pressure 1 Mpa Separator dimensions: 100x40x40mm
In stock10,18 € with VAT -
Air pressure regulator 1/4 "G with sludge trap - separator and lubricator ZFC2000
Air Station: Pressure regulator, blower and lubricator is advantageous to use as a pressure outlet for pneumatic tools requiring lubrication - eg for wrench, ratchet, grinder and others Control range: 0.5 - 8.5 Atm Inlet and outlet thread 1/4 "G Working temperature: 5-60 ° C Max pressure: 10 bar Dimensions: (HxWxD): 150x90x85mm Clamping holes of the holder: 2x M6 The integrated regulator body for wall or machine attachment The dehumidifier is equipped with a cyclone and a condensate drain valve The amount of oil automatically sucked into the air pressure is adjustable < Lubricant oil: Velocite 6 Lubricant oil: Velocite 6 Do not use cutting and bearing oil
In stock15,79 € with VAT -
Lubricator for PROFI pressure distribution, thread 1/4 "G, ZL2000
Thread: 1/4 "G Max Working Pressure: 10 bar (1.0 Mpa) Operating Temperature: 5 ° C to 60 ° C ° C Container volume: 25 cm3 Container made of high quality polycarbonate Recommended oil in the lubricant: Velocite 6 Do not use cutting and bearing oil !!! The input is marked on the bulb body by an arrow. Never connect the lubricator to the opposite direction!
In stock11,23 € with VAT -
Lubricator for PROFI pressure distribution, thread 3/8 "G, ZL3000
° C Container volume: 50 cm3 Container made of high quality polycarbonate Dimensions: 145x55mm Recommended oil in the lubricator: Velocite 6 Cutting and Do not use Bearing Oil !!! Input is marked on the body of the lubricator with an arrow. Never connect the lubricant to the opposite direction!
In stock11,05 € with VAT -
Lubricator for PROFI pressure distribution, thread 3/4 "G, ZL5000
° C Container volume: 130 cm3 Container made of high quality polycarbonate Dimensions: 250x90mm Recommended oil in the lubricant: Velocite 6 Cutting and Do not use Bearing Oil !!! Input is marked on the body of the lubricator with an arrow. Never connect the lubricant to the opposite direction!
In stock21,72 € with VAT -
Air pressure regulator 1/4 "G with sludge trap - ZW2000 separator
Recommended ✓PROFI version with die cast housing, cyclone drain and condensate drain valve Mounting bracket for mounting on the wall Mounting is possible in the air distribution branch, possibly after installation via the outlet end, as a controlled output 1/4 "G (1/4" G) Connector Operating Temperature Range: 5-60 ° Maximum Pressure 10 Atm Regulator Range 0.5 - 8.5 Atm (bar) Observe correct input / output connection !!!
In stock11,99 € with VAT