Air tools and accessories

Air tap with adjustable arm Range: according to the chosen variant * The range depends only on the VAT-SP tapping head, ie if you want a larger tapping range, you only need to buy a head with a different range - see related products. Min. compressor power: 5HP (corresponds to 3.8kW) Required pressure: 6-7 bar Air consumption: 940 l / min Arm positionability: Rmin. 500mm, Rmax 1600mm Contains 6 pcs of TC type extensions - the size of the extensions is stated in the description for individual variants. The attachments have a torque coupling for taps manufactured according to DIN371 and DIN376. You can find the specific attachment sizes in the label for each variant Additional adapters can be purchased - see related products. Includes air pressure regulator with separator and lubricator. Cast iron clamping plate not included! The tapping head works at a pressure of 6-7 bar, the inlet air must be dry and clean. Regularly add suitable pneumatic oil to the lubricator container. Use suitable cutting oil when threading. After one hour of operation, allow the head to cool for 10-15 minutes. Clean and inspect the head at 3-month intervals. Before each thread cutting, check that the machined surface is parallel to the tapping arm (correct threading in the axis). If the tapping machine is not in stock, the delivery date can be immediately - for the tapping machine it is enough to switch the tapping head for a type with a different range - we have VAT-SP tapping heads themselves in stock.

Air tap with adjustable arm Range: according to the chosen variant * The range depends only on the VAT-SP tapping head, ie if you want a larger tapping range, you only need to buy a head with a different range - see related products. Min. compressor power: 5HP (corresponds to 3.8kW) Required pressure: 6-7 bar Air consumption: 940 l / min Arm positionability: Rmin. 200mm, Rmax 1900mm Contains 6 pcs of TC type extensions - the size of the extensions is stated in the description for individual variants. The attachments have a torque coupling for taps manufactured according to DIN371 and DIN376. You can find the specific attachment sizes in the label for each variant Additional adapters can be purchased - see related products. Includes air pressure regulator with separator and lubricator. Cast iron clamping plate not included! The tapping head works at a pressure of 6-7 bar, the inlet air must be dry and clean. Regularly add suitable pneumatic oil to the lubricator container. Use suitable cutting oil when threading. After one hour of operation, allow the head to cool for 10-15 minutes. Clean and inspect the head at 3-month intervals. Before each thread cutting, check that the machined surface is parallel to the tapping arm (correct threading in the axis). If the tapping machine is not in stock, the delivery date can be immediately - for the tapping machine it is enough to switch the tapping head for a type with a different range - we have VAT-SP tapping heads themselves in stock.

Air tapping head / tap Range: according to the chosen variant Size of TC extensions: according to the selected variant Speed: see label for each variant Min. compressor power: 5HP (corresponds to 3.8kW) Required pressure: 6-7 bar Air consumption: 940 l / min The tapping head works at a pressure of 6-7 bar, the inlet air must be dry and clean. Regularly add suitable pneumatic oil to the lubricator container. Use suitable cutting oil when threading. After one hour of operation, allow the head to cool for 10-15 minutes. Clean and inspect the head at 3-month intervals. Before each thread cutting, check that the machined surface is parallel to the tapping arm (correct threading in the axis). The tap is without tap adapters, available for purchase - see related products

Adjustable swivel angle head For pneumatic taps: according to the selected variant Inclination: 90 °

Oil for pneumatic / air tools (poured into a plastic container) Quantity: according to the selected variant * Poured from a barrel, packed in plastic containers or canisters Suitable for lubrication of pneumatic systems - viscosity grade No. 6. High resistance to oxidation, protects against corrosion. Very resistant to foaming, excellent water separation - keeps moisture away from lubrication surfaces. Excellent for the lubrication of precision bearings with small tolerances. Meets classification / specification : Cincinnati P-62 Viscosity class ISO VG: 10 Viscosity ASTM D 445 at 40°C: 10.0 Viscosity ASTM D 445 at 100°C: 2.62 Acidity number TAN, ASTM D 974: 0.06 mgKOH/g Corrosion on copper, 3 hours at 100°C, ASTM D 130 : 1A Protection against rusting, Proc A, ASTM D 665 : meets Freezing point: ASTM D 97: -15°C Flash point ASTM D 92: 180°C Density at 15°C, ASTM D 4052: 0.844 kg/l The oil should not be used for other than the specified purpose. Lubrication of pneumatic tools is absolutely necessary, we recommend the use of dedicated lubricants. Always follow the instructions for use of the specific tool.

Shell Corena S2 R46 is a high quality compressor oil Quantity: according to the selected variant * Poured from a barrel, packed in plastic containers or canisters Designed for lubrication of rotary and screw air compressors Contains carefully selected additives that ensure reliable protection and constant performance of compressors operating with a maximum discharge temperature of 100°C and with pressures up to 15 bar, with an oil change interval of up to 4000 hours

Air blow gun with venturi nozzle / injector Air consumption: 150 l/min Working pressure: 6 bar Suitable for professional use Venturi nozzle provides 100% more air The gun has a quick-coupling tip

Cartridge Explosion-Proof Dimensions (W × H × D): 360 × 160 × 60 mm Weight: 0.46 kg

Tire inflation pressure gauge with pressure gauge, calibrated pressure gauge Test gauge has been performed, filler has a seal. A 63mm diameter alarm clock is fitted with a rubber casing Clearly arranged Bar and PSI Max. Measuring up to 10 Bar and 140 PSI Max. Pressure: 12 Bar Rubber hose with a total length of 350 mm is fitted with a straight end with a securing segment Release is done by pushing a button on the pistol body The filler is fitted with a pin for connection to a standard quick coupling in the pressure manifold

Special hardened nozzle with automatic material suction Container volume 1 liter Working pressure: 4-8bar Air consumption: 250-300l / min To remove rust and residue in hard-to-reach places . Hard Steel Nozzle 6mm Recommended grain size of abrasive is 0.8mm

Thick nozzle, material pick-up from a separate container Working pressure 4-8bar Air consumption: 250-400l / min To remove rust and residue in hard-to-reach places. The abrasive material is sucked from an external hose tank over 2m long. Hardened steel nozzle 6mm. The recommended grain size of the abrasive is 0.8mm

For grinding material up to 0.8 mm Length of suction hose 1700 mm, d = 18/24 mm Hardened steel nozzle 6.0 mm Working pressure: 5-8bar Air consumption : 320-420l / min To remove rust and residue in a hard-to-reach area. The abrasive material is sucked in by a large 1.7 m long rubber suction hose. The recommended grain size of the abrasive is 0.8mm