Air tools and accessories

Direct pneumatic polisher elongated Polisher pneumatic with 6mm collet for clamping polishing discs 3mm collet can be purchased Overall length 216mm Neck length 51mm, nut diameter 21mm Body diameter of grinder 40mm < Minimum Hose 9.5mm Air Consumption: 115 l / min. No-load speed 4.000 rpm. All-metal body. Supplied with 1/4 "G male threaded spindle and spanner for quick coupling The illustrated felt disc on the stem is not included in the scope of delivery but can also be purchased at our e-shop.

All-aluminum design, well fitting 5 pieces of replaceable extension pieces of various length Connection fitting 1/4 "G

ZR-1 lubricating pneumatic press comes with 2 terminals. May be used for fat free in cartridges. When the compressed air is connected, the operating pressure is 2-10 Atp Hydraulic gear 80-200 Atp

Lubricating press for manual and pneumatic control. The package includes a mechanical and pneumatic pump, a rigid and flexible attachment with 2 quick couplings heads. You can use both cartouche and fat for free. When compressed air is connected, the operating pressure is 2-10 Atp. Hydraulic transmission 80-200 Atp. The design of the tube allows both cartridges and fill grease to be used as a cartridge. After filling and releasing the push-button, press the air valve to air the system and prepare for pressure lubrication. Thread for hoses: NPT 1/8 "

ZR-Z2 extension set for hand and pneumatic lubrication presses - end caps for wide use

Sandblasting pistols, pneumatic Metal pistol Aluminum bottom vessel Supplied with accessories: 4x rubber nozzle (nozzle), waste bag, sandbox. Gun Thread: 1/4 "G Operating Pressure 4-8 bar (atm) Maximum Pressure 10 bar (atm) Air Consumption: 250-350l / min

Tire Inflator, Tire Pressure Gauge with Front Alarm / Gauge / Pressure Gauge Measurement in Bar, PSI, KPa, Kg / cm2 Measuring Ranges: 0-255 PSI 0-18 Bar 0-15 kg / cm2 0-1800 KPa Alarm Clock Diameter 60mm, Equipped with Rubber Sheath Overall Length Rubber Hose is 480mm (including End) The end cap for this tire filler is two-sided, it is suitable for inflating the tire of the truck in the double-fitting version The trigger is located front The drain is done by pressing the button on the filler body 1/4 "G (internal thread 1/4 "G) Quick coupler included

PROFI version with die cast housing, cyclone drain and condensate drain valve Mounting bracket for mounting on the wall Mounting is possible in the air distribution branch, possibly after installation via the outlet end, as a controlled output 1/4 "G (1/4" G) Connector Operating Temperature Range: 5-60 ° Maximum Pressure 10 Atm Regulator Range 0.5 - 8.5 Atm (bar) Observe correct input / output connection !!!

Lubricator for pneumatic tools, lubricator for pressure distribution Threads 1/2 "G Maximum working pressure 1.0 MPa(10 bar) Working temperature - 5-60° C Container content: 50 cm3 Body is made of polycarbonate Lubricant weight: 0.3 kg Dimensions: 170x70mm Recommended lubricator oil: Velocite 6 DO NOT USE cutting and bearing oil !!!

Spare nozzle for MINI HVLP spray gun with upper container Nozzle diameter 1.0 mm Total needle length x Dimensions of individual needle parts see.2. obrázek Designed for pistol type H-2000A

Spare nozzle for large HVLP spray gun with upper container Nozzle diameter 2.0 mm Total needle length x Dimensions of individual needle parts see.2. picture

High quality spraying varnishing low pressure HVLP pistol with three control elements. Nozzle: 1.4mm > Air consumption: 170-300 l / min Nozzles 2.0 and 2.5mm (on fillers) color, key and brush